Deutsch
Français
made by concatenation
Driver for Modular Bulkhead OrbitalCSR BH150341 & BH150358.
Output current adjustment (3 levels) using microswitches.
Output current adjustment (3 levels) using microswitches.
RANGES
There are 22 products.
Active filters
made by concatenation
Driver for Modular Bulkhead OrbitalCSR BH150143 & BH150150.
Output current adjustment (3 levels) using microswitches.
Output current adjustment (3 levels) using microswitches.
made by concatenation
Emergency Pack 2.5W Constant Wattage Selftest for OrbitalCSR™ BH150143 & BH150341
made by concatenation
Colour & Wattage Switchable IP66 Modular Plug&Play Bulkhead with opal polycarbonate IK10 diffuser for even and uniform light distribution. Perfect for demanding wall and ceiling installations.
Modular product design enables simplified plug and play accessory addition and product maintenaince. Ready to plug Microwave, Emergency, and Driver packs are available as accessory.
IP66 rated rear and side entry access wiring compartment enable quick and simple through-wiring and product installation.
Microwave Sensor version with adjustable daylight harvesting function (25lux/off), 108° detection range up to 4 meter and hold time configurations from 5 seconds to 30 minutes available.
UV resistant and suitable for installations in unprotected outdoor areas with ambient temperatures from -25°C to +45°C.
Modular product design enables simplified plug and play accessory addition and product maintenaince. Ready to plug Microwave, Emergency, and Driver packs are available as accessory.
IP66 rated rear and side entry access wiring compartment enable quick and simple through-wiring and product installation.
Microwave Sensor version with adjustable daylight harvesting function (25lux/off), 108° detection range up to 4 meter and hold time configurations from 5 seconds to 30 minutes available.
UV resistant and suitable for installations in unprotected outdoor areas with ambient temperatures from -25°C to +45°C.
made by concatenation
Colour & Wattage Switchable IP66 Modular Plug&Play Bulkhead with opal polycarbonate IK10 diffuser for even and uniform light distribution. Perfect for demanding wall and ceiling installations.
Modular product design enables simplified plug and play accessory addition and product maintenaince. Ready to plug Microwave, Emergency, and Driver packs are available as accessory.
IP66 rated rear and side entry access wiring compartment enable quick and simple through-wiring and product installation.
Microwave Sensor version with adjustable daylight harvesting function (25lux/off), 108° detection range up to 4 meter and hold time configurations from 5 seconds to 30 minutes available.
UV resistant and suitable for installations in unprotected outdoor areas with ambient temperatures from -25°C to +45°C.
Modular product design enables simplified plug and play accessory addition and product maintenaince. Ready to plug Microwave, Emergency, and Driver packs are available as accessory.
IP66 rated rear and side entry access wiring compartment enable quick and simple through-wiring and product installation.
Microwave Sensor version with adjustable daylight harvesting function (25lux/off), 108° detection range up to 4 meter and hold time configurations from 5 seconds to 30 minutes available.
UV resistant and suitable for installations in unprotected outdoor areas with ambient temperatures from -25°C to +45°C.
made by concatenation
Colour & Wattage Switchable IP66 Modular Plug&Play Bulkhead with opal polycarbonate IK10 diffuser for even and uniform light distribution. Perfect for demanding wall and ceiling installations.
Modular product design enables simplified plug and play accessory addition and product maintenaince. Ready to plug Microwave, Emergency, and Driver packs are available as accessory.
IP66 rated rear and side entry access wiring compartment enable quick and simple through-wiring and product installation.
Microwave Sensor version with adjustable daylight harvesting function (25lux/off), 108° detection range up to 4 meter and hold time configurations from 5 seconds to 30 minutes available.
UV resistant and suitable for installations in unprotected outdoor areas with ambient temperatures from -25°C to +45°C.
Modular product design enables simplified plug and play accessory addition and product maintenaince. Ready to plug Microwave, Emergency, and Driver packs are available as accessory.
IP66 rated rear and side entry access wiring compartment enable quick and simple through-wiring and product installation.
Microwave Sensor version with adjustable daylight harvesting function (25lux/off), 108° detection range up to 4 meter and hold time configurations from 5 seconds to 30 minutes available.
UV resistant and suitable for installations in unprotected outdoor areas with ambient temperatures from -25°C to +45°C.
made by concatenation
Colour & Wattage Switchable IP66 Modular Plug&Play Bulkhead with opal polycarbonate IK10 diffuser for even and uniform light distribution. Perfect for demanding wall and ceiling installations.
Modular product design enables simplified plug and play accessory addition and product maintenaince. Ready to plug Microwave, Emergency, and Driver packs are available as accessory.
IP66 rated rear and side entry access wiring compartment enable quick and simple through-wiring and product installation.
Microwave Sensor version with adjustable daylight harvesting function (25lux/off), 108° detection range up to 4 meter and hold time configurations from 5 seconds to 30 minutes available.
UV resistant and suitable for installations in unprotected outdoor areas with ambient temperatures from -25°C to +45°C.
Modular product design enables simplified plug and play accessory addition and product maintenaince. Ready to plug Microwave, Emergency, and Driver packs are available as accessory.
IP66 rated rear and side entry access wiring compartment enable quick and simple through-wiring and product installation.
Microwave Sensor version with adjustable daylight harvesting function (25lux/off), 108° detection range up to 4 meter and hold time configurations from 5 seconds to 30 minutes available.
UV resistant and suitable for installations in unprotected outdoor areas with ambient temperatures from -25°C to +45°C.
ONExBAFFLE - DL151379
Colour & Wattage Switchable Baffled Triac dimmable LED Fire Rated LED Downlight.
IP65 sleek baffled design to reduce glare. Supplied with White Aluminium Bezel. Black and Satin Nickel options available.
Rapid tool-free installation through loop in / loop out push-fit wiring terminals with strain relief.
Compact integrated design with insulation cover allow for use in shallow voids up to 73mm. Downlight and driver are insulation coverable.
Tested in 30 and 60 minutes fire-rated ceilings according to EN1365-2.
IP65 sleek baffled design to reduce glare. Supplied with White Aluminium Bezel. Black and Satin Nickel options available.
Rapid tool-free installation through loop in / loop out push-fit wiring terminals with strain relief.
Compact integrated design with insulation cover allow for use in shallow voids up to 73mm. Downlight and driver are insulation coverable.
Tested in 30 and 60 minutes fire-rated ceilings according to EN1365-2.
PavoCWS - DL149529
Colour & Wattage Switchable Polycarbonate LED Downlight for surface or recessed installations with adjustable cut-out.
3 Wattage and 3 Colour Selections available for ultimate flexibility in every application and perfect retrofit solution for renovations.
One size fit all bracket for adjustable cut-out between 65-180mm (DL149529 & DL151133) or 65-240mm (DL150389 & DL151140) enables flexible recessed or surface mount installation.
Integrated non dimmable led driver for very low profile installation height of only 17mm.
Magnetic design allows customization of white standard version with magnetic Black and Satin Nickel bezels.
3 Wattage and 3 Colour Selections available for ultimate flexibility in every application and perfect retrofit solution for renovations.
One size fit all bracket for adjustable cut-out between 65-180mm (DL149529 & DL151133) or 65-240mm (DL150389 & DL151140) enables flexible recessed or surface mount installation.
Integrated non dimmable led driver for very low profile installation height of only 17mm.
Magnetic design allows customization of white standard version with magnetic Black and Satin Nickel bezels.
PavoCWS - DL150389
Colour & Wattage Switchable Polycarbonate LED Downlight for surface or recessed installations with adjustable cut-out.
3 Wattage and 3 Colour Selections available for ultimate flexibility in every application and perfect retrofit solution for renovations.
One size fit all bracket for adjustable cut-out between 65-180mm (DL149529 & DL151133) or 65-240mm (DL150389 & DL151140) enables flexible recessed or surface mount installation.
Integrated non dimmable led driver for very low profile installation height of only 17mm.
Magnetic design allows customization of white standard version with magnetic Black and Satin Nickel bezels.
3 Wattage and 3 Colour Selections available for ultimate flexibility in every application and perfect retrofit solution for renovations.
One size fit all bracket for adjustable cut-out between 65-180mm (DL149529 & DL151133) or 65-240mm (DL150389 & DL151140) enables flexible recessed or surface mount installation.
Integrated non dimmable led driver for very low profile installation height of only 17mm.
Magnetic design allows customization of white standard version with magnetic Black and Satin Nickel bezels.
PavoCWS - DL151133
Colour & Wattage Switchable Polycarbonate LED Downlight for surface or recessed installations with adjustable cut-out.
3 Wattage and 3 Colour Selections available for ultimate flexibility in every application and perfect retrofit solution for renovations.
One size fit all bracket for adjustable cut-out between 65-180mm (DL149529 & DL151133) or 65-240mm (DL150389 & DL151140) enables flexible recessed or surface mount installation.
Integrated non dimmable led driver for very low profile installation height of only 17mm.
Magnetic design allows customization of white standard version with magnetic Black and Satin Nickel bezels.
3 Wattage and 3 Colour Selections available for ultimate flexibility in every application and perfect retrofit solution for renovations.
One size fit all bracket for adjustable cut-out between 65-180mm (DL149529 & DL151133) or 65-240mm (DL150389 & DL151140) enables flexible recessed or surface mount installation.
Integrated non dimmable led driver for very low profile installation height of only 17mm.
Magnetic design allows customization of white standard version with magnetic Black and Satin Nickel bezels.
PavoCWS - DL151140
Colour & Wattage Switchable Polycarbonate LED Downlight for surface or recessed installations with adjustable cut-out.
3 Wattage and 3 Colour Selections available for ultimate flexibility in every application and perfect retrofit solution for renovations.
One size fit all bracket for adjustable cut-out between 65-180mm (DL149529 & DL151133) or 65-240mm (DL150389 & DL151140) enables flexible recessed or surface mount installation.
Integrated non dimmable led driver for very low profile installation height of only 17mm.
Magnetic design allows customization of white standard version with magnetic Black and Satin Nickel bezels.
3 Wattage and 3 Colour Selections available for ultimate flexibility in every application and perfect retrofit solution for renovations.
One size fit all bracket for adjustable cut-out between 65-180mm (DL149529 & DL151133) or 65-240mm (DL150389 & DL151140) enables flexible recessed or surface mount installation.
Integrated non dimmable led driver for very low profile installation height of only 17mm.
Magnetic design allows customization of white standard version with magnetic Black and Satin Nickel bezels.
SpryteCS - DL149963
Colour Switchable compact integrated IP44 Triac dimmable Polycarbonate LED Downlights for installations in shallow ceiling voids.
Fixed and Adjustable versions offer best value for money and are ideal as GU10 replacement installations in limited recess space (56mm height).
LEDchroic lens design with 60° beam angle imitates the appearance of halogen lamps and provides controlled, uniform light distribution with minimal glare.
Class II and air leakage tested meeting latest building regulation requirements.
Pre-wired with 500mm 2 core cable allows tool free rapid installation.
Fixed and Adjustable versions offer best value for money and are ideal as GU10 replacement installations in limited recess space (56mm height).
LEDchroic lens design with 60° beam angle imitates the appearance of halogen lamps and provides controlled, uniform light distribution with minimal glare.
Class II and air leakage tested meeting latest building regulation requirements.
Pre-wired with 500mm 2 core cable allows tool free rapid installation.