0

tags

    No tags have been specified yet.

Active filters

1-10V DRIVER - DR159511

The DR159511 driver is a dimmable 1-10V driver with adjustable constant current. It is supplied complete with an IP65 cable for connection to the luminaire.
Dimming range from 5 to 100%.
No flicker and smooth dimming in all light conditions.
Output current adjustment ( 10 levels ) by means of micro-switches.
Support CBS , central emergency application.
Independent cable clamps ( inlet / outlet ).

Asimes - BH156824

Colour Switchable IP65 Asymetrical Bulkhead with opal polycarbonate IK10 diffuser for even and uniform light distribution. Perfect for demanding wall and ceiling installations.
3 Colour Selections available for ultimate flexibility in every application.
IP65 rated rear entry access wiring compartment enable quick and simple through-wiring and product installation.
Suitable for ambient temperatures from -20°C to +45°C.



Backlite - LP149505

Eco LED Backlit Panel with optical pattern PMMA lenses engineered for even and uniform light distribution offer best value for money.
Opal diffuser provides glare control with achievable UGR19.
Suitable for installations in 15 and 24mm t-bar ceilings as well as ceiling suspension, surface mount or recess mount in plasterboard.
Flicker-free non-dimmable LED driver pre-wired for simplified and fast installation.



BackLite - LP149512

Eco LED Backlit Panel with optical pattern PMMA lenses engineered for even and uniform light distribution offer best value for money.
Opal diffuser provides glare control with achievable UGR19.
Suitable for installations in 15 and 24mm t-bar ceilings as well as ceiling suspension, surface mount or recess mount in plasterboard.
Flicker-free non-dimmable LED driver pre-wired for simplified and fast installation.



BATPAC CWS - CL149901

Colour & Wattage Switchable high-efficiency (150lm/W) LED Battens with opal diffuser for even and uniform light distribution.
Modular plug and play solution allows simple product extension on construction site by installing Microwave Sensor and/or Emergency Selftest Modules.
Integrated flicker-free non-dimmable driver with loop in loop out connector for simplified and fast installation, knockouts on both ends for cable entry.
2 Wattage and 3 Colour Selections available for ultimate flexibility in every application and perfect retrofit solution for single and twin fluorescent fittings.
Options: Microwave Sensor with 108° detection beam and range up to 4 meters. Emergency Pack 2.5W with Selftest function.


BATPAC CWS - CL149918

Colour & Wattage Switchable high-efficiency (150lm/W) LED Battens with opal diffuser for even and uniform light distribution.
Modular plug and play solution allows simple product extension on construction site by installing Microwave Sensor and/or Emergency Selftest Modules.
Integrated flicker-free non-dimmable driver with loop in loop out connector for simplified and fast installation, knockouts on both ends for cable entry.
2 Wattage and 3 Colour Selections available for ultimate flexibility in every application and perfect retrofit solution for single and twin fluorescent fittings.
Options: Microwave Sensor with 108° detection beam and range up to 4 meters. Emergency Pack 2.5W with Selftest function.


CirclePROCWS - DL151126

Colour & Wattage Selectable IP54 Impact-Resistant Commercial Surface-Mount Luminaire as perfect solution for new commercial applications or upgrading from compact fluorescent fittings in existing environments.
Rear wiring compartment with push-fit terminals for quick, tool-free through-wiring.
Offers 3 wattage and 2 colour selections for ultimate flexibility and ideal retrofit use in renovation projects.
IP54 & IK08 rated impact-resistant polycarbonate housing. Suitable for ambient temperatures from –20 °C to +40 °C.



CirclePROCWS - DL151157

Colour & Wattage Selectable IP54 Impact-Resistant Commercial Surface-Mount Luminaire as perfect solution for new commercial applications or upgrading from compact fluorescent fittings in existing environments.
Rear wiring compartment with push-fit terminals for quick, tool-free through-wiring.
3 Wattage and 2 Colour Selections available for ultimate flexibility in every application and perfect retrofit solution for renovations.
Microwave sensor version with daylight harvesting: 110° detection angle, range up to 4 m, and adjustable hold time from 5 seconds to 10 minutes.
IP54 & IK08 rated impact-resistant polycarbonate housing. Suitable for ambient temperatures from –20 °C to +40 °C.


CirclePROCWS - DL151164

Colour & Wattage Selectable IP54 Impact-Resistant Commercial Surface-Mount Luminaire as perfect solution for new commercial applications or upgrading from compact fluorescent fittings in existing environments.
Rear wiring compartment with push-fit terminals for quick, tool-free through-wiring.
3 Wattage and 2 Colour Selections available for ultimate flexibility in every application and perfect retrofit solution for renovations.
IP54 & IK08 rated impact-resistant polycarbonate housing. Suitable for ambient temperatures from –20 °C to +40 °C.



CirclePROCWS - DL151171

Colour & Wattage Selectable IP54 Impact-Resistant Commercial Surface-Mount Luminaire as perfect solution for new commercial applications or upgrading from compact fluorescent fittings in existing environments.
Rear wiring compartment with push-fit terminals for quick, tool-free through-wiring.
3 Wattage and 2 Colour Selections available for ultimate flexibility in every application and perfect retrofit solution for renovations.
Microwave sensor version with daylight harvesting: 110° detection angle, range up to 4 m, and adjustable hold time from 5 seconds to 10 minutes.
IP54 & IK08 rated impact-resistant polycarbonate housing. Suitable for ambient temperatures from –20 °C to +40 °C.


CirclePROCWS - DL151188

Colour & Wattage Selectable IP54 Impact-Resistant Commercial Surface-Mount Luminaire as perfect solution for new commercial applications or upgrading from compact fluorescent fittings in existing environments.
Rear wiring compartment with push-fit terminals for quick, tool-free through-wiring.
3 Wattage and 2 Colour Selections available for ultimate flexibility in every application and perfect retrofit solution for renovations.
IP54 & IK08 rated impact-resistant polycarbonate housing. Suitable for ambient temperatures from –20 °C to +40 °C.



CirclePROCWS - DL151195

Colour & Wattage Selectable IP54 Impact-Resistant Commercial Surface-Mount Luminaire as perfect solution for new commercial applications or upgrading from compact fluorescent fittings in existing environments.
Rear wiring compartment with push-fit terminals for quick, tool-free through-wiring.
3 Wattage and 2 Colour Selections available for ultimate flexibility in every application and perfect retrofit solution for renovations.
Microwave sensor version with daylight harvesting: 110° detection angle, range up to 4 m, and adjustable hold time from 5 seconds to 10 minutes.
IP54 & IK08 rated impact-resistant polycarbonate housing. Suitable for ambient temperatures from –20 °C to +40 °C.


CLEARVU - LA150532

Cost effective and super reliable GU10 lamp range with advanced thermal management to control key component temperatures.
Single Colour version with LEDchroic lens design with 38° beam angle imitates the appearance of halogen lamps and provides controlled, uniform light distribution with minimal glare.
Designed and tested for suitable use in enclosed fire rated and insulation coverable lighting fixtures. Excellent dimming compatibility with all market common dimmers in Europe.




CLEARVU - LA150549

Cost effective and super reliable GU10 lamp range with advanced thermal management to control key component temperatures.
Single Colour version with LEDchroic lens design with 38° beam angle imitates the appearance of halogen lamps and provides controlled, uniform light distribution with minimal glare.
Designed and tested for suitable use in enclosed fire rated and insulation coverable lighting fixtures. Excellent dimming compatibility with all market common dimmers in Europe.




CLEARVU - LA150556

Cost effective and super reliable GU10 lamp range with advanced thermal management to control key component temperatures.
Single Colour version with LEDchroic lens design with 38° beam angle imitates the appearance of halogen lamps and provides controlled, uniform light distribution with minimal glare.
Designed and tested for suitable use in enclosed fire rated and insulation coverable lighting fixtures. Excellent dimming compatibility with all market common dimmers in Europe.




This website uses cookies to ensure you get the best experience on our website