The DR159436 driver is a dimmable (0) 1-10V, DALI-2 and PushDIM driver with adjustable constant current. It is supplied complete with a cable for connection to the luminaire. Dimming range from 1 to 100%. No flicker and smooth dimming in all light conditions. Output current adjustment ( 10 levels ) by means of micro-switches. Support CBS , central emergency application. Independent cable clamps ( inlet / outlet ).
Non-dimmable Constant Voltage (CV) LED driver. SELV type with Short circuit, Overload and Over voltage protection. Loop in/out on primary side, 3 X 24 VDC outputs on screw terminal block. IP20 for indoor use. Independent cable clamps ( inlet / outlet ).
Non-dimmable Constant Voltage (CV) LED driver. SELV type with Short circuit, Overload and Over voltage protection. 2 x 24 VDC outputs on screw terminal block. IP20 for indoor use. Independent cable clamps ( inlet / outlet ).
Non-dimmable Constant Voltage (CV) LED driver. SELV type with Short circuit, Overload and Over voltage protection. 2 x 24 VDC outputs on screw terminal block. IP20 for indoor use. Independent cable clamps ( inlet / outlet ).
Non-dimmable Constant Voltage (CV) LED driver. SELV type with Short circuit, Overload and Over voltage protection. 2 x 24 VDC outputs on screw terminal block. IP20 for indoor use. Independent cable clamps ( inlet / outlet ).
Dimmable Phase Cut ( TRIAC) Constant Voltage (CV) LED driver. SELV type with Short circuit, Overload and Over voltage protection. 2 x 24 VDC outputs on screw terminal block. IP20 for indoor use. Independent cable clamps ( inlet / outlet ).
Dimmable Phase Cut ( TRIAC) Constant Voltage (CV) LED driver. SELV type with Short circuit, Overload and Over voltage protection. 2 x 24 VDC outputs on screw terminal block. IP20 for indoor use. Independent cable clamps ( inlet / outlet ).
High intensity SMD LED Strip with 3m self adhesive tape. Cut points every 50mm for maximum flexibility. Beam angle of 120° and 120 LEDs per metre. For runs over 10 metres individual lengths should be connected in parallel.
High intensity SMD LED Strip with 3m self adhesive tape. Cut points every 50mm for maximum flexibility. Beam angle of 120° and 120 LEDs per metre. For runs over 10 metres individual lengths should be connected in parallel.
High intensity SMD LED Strip with 3m self adhesive tape. Cut points every 50mm for maximum flexibility. Beam angle of 120° and 120 LEDs per metre. For runs over 10 metres individual lengths should be connected in parallel.
Deutsch
Français
