IP67 GU10 Recessed Ground Light as the perfect choice for residential outdoor environments. Corrosion-resistant body with 304 stainless steel bezel, A4 stainless steel screws and clear tempered glass diffuser (2.500kg load) with salt-spray protection. Supplied with integrated GU10 socket and two waterproof cable glands for safe and secure through-wiring in outdoor applications. Designed for ambient temperatures from –30 °C to +45 °C.
Non-dimmable Constant Voltage (CV) LED driver. SELV type with Short circuit, Overload and Over voltage protection. Loop in/out on primary side, 3 X 24 VDC outputs on screw terminal block. IP20 for indoor use. Independent cable clamps ( inlet / outlet ).
Non-dimmable Constant Voltage (CV) LED driver. SELV type with Short circuit, Overload and Over voltage protection. 2 x 24 VDC outputs on screw terminal block. IP20 for indoor use. Independent cable clamps ( inlet / outlet ).
Non-dimmable Constant Voltage (CV) LED driver. SELV type with Short circuit, Overload and Over voltage protection. 2 x 24 VDC outputs on screw terminal block. IP20 for indoor use. Independent cable clamps ( inlet / outlet ).
Non-dimmable Constant Voltage (CV) LED driver. SELV type with Short circuit, Overload and Over voltage protection. 2 x 24 VDC outputs on screw terminal block. IP20 for indoor use. Independent cable clamps ( inlet / outlet ).
Dimmable Phase Cut ( TRIAC) Constant Voltage (CV) LED driver. SELV type with Short circuit, Overload and Over voltage protection. 2 x 24 VDC outputs on screw terminal block. IP20 for indoor use. Independent cable clamps ( inlet / outlet ).
Dimmable Phase Cut ( TRIAC) Constant Voltage (CV) LED driver. SELV type with Short circuit, Overload and Over voltage protection. 2 x 24 VDC outputs on screw terminal block. IP20 for indoor use. Independent cable clamps ( inlet / outlet ).
High intensity SMD LED Strip with 3m self adhesive tape. Cut points every 50mm for maximum flexibility. Beam angle of 120° and 120 LEDs per metre. For runs over 10 metres individual lengths should be connected in parallel.
High intensity SMD LED Strip with 3m self adhesive tape. Cut points every 50mm for maximum flexibility. Beam angle of 120° and 120 LEDs per metre. For runs over 10 metres individual lengths should be connected in parallel.
High intensity SMD LED Strip with 3m self adhesive tape. Cut points every 50mm for maximum flexibility. Beam angle of 120° and 120 LEDs per metre. For runs over 10 metres individual lengths should be connected in parallel.
Deutsch
Français
