Deutsch
Français
RANGES
There are 19 products.
Active filters
LED DRIVER - DR152840
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit, Overload and Over voltage protection.
Loop in/out on primary side, 3 X 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit, Overload and Over voltage protection.
Loop in/out on primary side, 3 X 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
LED DRIVER - DR154585
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit, Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit, Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
LED DRIVER - DR154592
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit, Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit, Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
LED DRIVER - DR154615
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit, Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit, Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
LED DRIVER - DR154622
Dimmable Phase Cut ( TRIAC) Constant Voltage (CV) LED driver.
SELV type with Short circuit, Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit, Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
LEDlineCOB - ST152987
Single colour high intensity COB LED Strip with 3m self adhesive backing for continuous light without LED hotspots.
Cut points every 50mm for maximum flexibility.
Beam angle of 150° and 480 LEDs per metre.
For runs over 5 metres individual lenghts should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 150° and 480 LEDs per metre.
For runs over 5 metres individual lenghts should be connected in parallel.
LEDlineCOB - ST152994
Single colour high intensity COB LED Strip with 3m self adhesive backing for continuous light without LED hotspots.
Cut points every 50mm for maximum flexibility.
Beam angle of 150° and 480 LEDs per metre.
For runs over 5 metres individual lenghts should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 150° and 480 LEDs per metre.
For runs over 5 metres individual lenghts should be connected in parallel.
LEDlineCOB - ST153007
Single colour high intensity COB LED Strip with 3m self adhesive backing for continuous light without LED hotspots.
Cut points every 50mm for maximum flexibility.
Beam angle of 150° and 480 LEDs per metre.
For runs over 5 metres individual lenghts should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 150° and 480 LEDs per metre.
For runs over 5 metres individual lenghts should be connected in parallel.
LEDlineCOB - ST153014
Single colour high intensity COB LED Strip with 3m self adhesive backing for continuous light without LED hotspots.
Cut points every 50mm for maximum flexibility.
Beam angle of 150° and 480 LEDs per metre.
For runs over 5 metres individual lenghts should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 150° and 480 LEDs per metre.
For runs over 5 metres individual lenghts should be connected in parallel.
LEDlineCOB - ST153021
Single colour high intensity COB LED Strip with 3m self adhesive backing for continuous light without LED hotspots.
Cut points every 50mm for maximum flexibility.
Beam angle of 150° and 480 LEDs per metre.
For runs over 5 metres individual lenghts should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 150° and 480 LEDs per metre.
For runs over 5 metres individual lenghts should be connected in parallel.
LEDlineCOB - ST156589
Single colour high intensity COB LED Strip with 3m self adhesive backing for continuous light without LED hotspots.
Cut points every 50mm for maximum flexibility.
Beam angle of 150° and 480 LEDs per metre.
For runs over 5 metres individual lenghts should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 150° and 480 LEDs per metre.
For runs over 5 metres individual lenghts should be connected in parallel.
LEDlineCOB - ST159566
Tuneable White high intensity COB LED Strip with 3M self adhesive backing for continuous light without LED hotspots.
Cut points every 25mm for maximum flexibility.
Beam angle of 130° and 640 LEDs per metre.
For runs over 5 metres individual lenghts should be connected in parallel.
Cut points every 25mm for maximum flexibility.
Beam angle of 130° and 640 LEDs per metre.
For runs over 5 metres individual lenghts should be connected in parallel.
SpryteCS - DL149987
Spryte Slim™ 7W Low Profile Triac Dim 3CCT 2700/3200/4000K Adjustable LED Downlight
TRAC - RT154219
Adjustable single circuit track spotlight and slimline track adaptor with GU10 6W Colour Selectable Lamp or for your choice GU10 lamps.
Track lighting offers maximum flexibility for retail and commercial applications where light sources must be adaptable for changes in displays. Ready made track kit available for simple installation. Available in black and white.
350° Adjustable Rotation & 90° Tilt.
For use with GU10 lamps up to max 35W.
Track lighting offers maximum flexibility for retail and commercial applications where light sources must be adaptable for changes in displays. Ready made track kit available for simple installation. Available in black and white.
350° Adjustable Rotation & 90° Tilt.
For use with GU10 lamps up to max 35W.