IP65 GU10 Recessed Ground Light as the perfect choice for residential outdoor environments. Corrosion-resistant body with 304 stainless steel bezel, A4 stainless steel screws and clear tempered glass diffuser (2.500kg load) with salt-spray protection. Fourni avec une douille GU10 intégrée et un câble en caoutchouc pré-câblé de 1 m pour une installation sûre et sécurisée dans les applications extérieures. Designed for ambient temperatures from –30 °C to +45 °C.
IP67 GU10 Recessed Ground Light as the perfect choice for residential outdoor environments. Corrosion-resistant body with 304 stainless steel bezel, A4 stainless steel screws and clear tempered glass diffuser (2.500kg load) with salt-spray protection. Supplied with integrated GU10 socket and two waterproof cable glands for safe and secure through-wiring in outdoor applications. Designed for ambient temperatures from –30 °C to +45 °C.
Non-dimmable Constant Voltage (CV) LED driver. SELV type with Short circuit, Overload and Over voltage protection. Loop in/out on primary side, 3 X 24 VDC outputs on screw terminal block. IP20 for indoor use. Independent cable clamps ( inlet / outlet ).
Non-dimmable Constant Voltage (CV) LED driver. SELV type with Short circuit, Overload and Over voltage protection. 2 x 24 VDC outputs on screw terminal block. IP20 for indoor use. Independent cable clamps ( inlet / outlet ).
Non-dimmable Constant Voltage (CV) LED driver. SELV type with Short circuit, Overload and Over voltage protection. 2 x 24 VDC outputs on screw terminal block. IP20 for indoor use. Independent cable clamps ( inlet / outlet ).
Non-dimmable Constant Voltage (CV) LED driver. SELV type with Short circuit, Overload and Over voltage protection. 2 x 24 VDC outputs on screw terminal block. IP20 for indoor use. Independent cable clamps ( inlet / outlet ).
Dimmable Phase Cut ( TRIAC) Constant Voltage (CV) LED driver. SELV type with Short circuit, Overload and Over voltage protection. 2 x 24 VDC outputs on screw terminal block. IP20 for indoor use. Independent cable clamps ( inlet / outlet ).
Colour and wattage Switchable IP65 Bulkhead with integrated PIR sensor and opal polycarbonate IK10 diffuser for even and uniform light distribution provides best energy saving. Integrated infrared detector sensor with daylight harvesting feature. When people enter its detection range and triggers, lights turn on. When people leave its detection area, the light will automatically turn off. Ambient illumination <10Iux-2000Iux adjustable, delay time 10s - 10min. 3 Colour Selections (3000K/3500K/4000K) available for ultimate flexibility in every application. IP65 rated rear entry access wiring compartment enables quick and simple product installation. UV resistant and suitable for installations in unprotected outdoor areas with ambient temperatures from -25°C to +45°C.
Deutsch
Français
