The DR159436 driver is a dimmable (0) 1-10V, DALI-2 and PushDIM driver with adjustable constant current. It is supplied complete with a cable for connection to the luminaire. Dimming range from 1 to 100%. No flicker and smooth dimming in all light conditions. Output current adjustment ( 10 levels ) by means of micro-switches. Support CBS , central emergency application. Independent cable clamps ( inlet / outlet ).
IP65 GU10 Fire Rated Downlight including GU10 lamp and Fixed Aluminium Bezel. Designed to seal ceilings completely. Rapid installation through loop in/loop out push-fit wiring terminals with strain relief. Fully insulation coverable (blown or unwound) without the need of additional accessory or insulation cut-out. Vapour-barrier compatible. ISOPRO Kit includes the GU10 ICE lamp with superior thermal management which has been specifically designed and tested in closed fire rated and insulation covered downlights Tested in 30, 60 and 90 minutes fire-rated ceilings according to EN1365-2. Airtight and Acoustics rated.
IP65 GU10 Fire Rated Downlight including GU10 lamp and Fixed Aluminium Bezel. Designed to seal ceilings completely. Rapid installation through loop in/loop out push-fit wiring terminals with strain relief. Fully insulation coverable (blown or unwound) without the need of additional accessory or insulation cut-out. Vapour-barrier compatible. ISOPRO Kit includes the GU10 ICE lamp with superior thermal management which has been specifically designed and tested in closed fire rated and insulation covered downlights Tested in 30, 60 and 90 minutes fire-rated ceilings according to EN1365-2. Airtight and Acoustics rated.
High-efficiency (140lm/W) IP65 corrosion-resistant linear batten with opal diffuser for even and uniform light distribution. IP65 rated cable glands on both ends as well as at rear entrance enable quick and simple through-wiring and product installation. Quick release hinged gear tray with durable stainless steel anti-tamper clips fitted for faster installation and maintenance. After the base is secured, the diffuser simply clips into place. IK08 polycarbonate diffuser and housing vandal-proof. Suitable for ambient temperatures from -20°C to +40°C.
High-efficiency (140lm/W) IP65 corrosion-resistant linear batten with opal diffuser for even and uniform light distribution. IP65 rated cable glands on both ends as well as at rear entrance enable quick and simple through-wiring and product installation. Quick release hinged gear tray with durable stainless steel anti-tamper clips fitted for faster installation and maintenance. After the base is secured, the diffuser simply clips into place. IK08 polycarbonate diffuser and housing vandal-proof. Suitable for ambient temperatures from -20°C to +40°C.
High-efficiency (140lm/W) IP65 corrosion-resistant linear batten with opal diffuser for even and uniform light distribution. IP65 rated cable glands on both ends as well as at rear entrance enable quick and simple through-wiring and product installation. Quick release hinged gear tray with durable stainless steel anti-tamper clips fitted for faster installation and maintenance. After the base is secured, the diffuser simply clips into place. IK08 polycarbonate diffuser and housing vandal-proof. Suitable for ambient temperatures from -20°C to +40°C.
High-efficiency (140lm/W) IP65 corrosion-resistant linear batten with opal diffuser for even and uniform light distribution. IP65 rated cable glands on both ends as well as at rear entrance enable quick and simple through-wiring and product installation. Quick release hinged gear tray with durable stainless steel anti-tamper clips fitted for faster installation and maintenance. After the base is secured, the diffuser simply clips into place. IK08 polycarbonate diffuser and housing vandal-proof. Suitable for ambient temperatures from -20°C to +40°C.
High-efficiency (140lm/W) IP65 corrosion-resistant linear batten with opal diffuser for even and uniform light distribution. IP65 rated cable glands on both ends as well as at rear entrance enable quick and simple through-wiring and product installation. Quick release hinged gear tray with durable stainless steel anti-tamper clips fitted for faster installation and maintenance. After the base is secured, the diffuser simply clips into place. IK08 polycarbonate diffuser and housing vandal-proof. Suitable for ambient temperatures from -20°C to +40°C.
High-efficiency (140lm/W) IP65 corrosion-resistant linear batten with opal diffuser for even and uniform light distribution. IP65 rated cable glands on both ends as well as at rear entrance enable quick and simple through-wiring and product installation. Quick release hinged gear tray with durable stainless steel anti-tamper clips fitted for faster installation and maintenance. After the base is secured, the diffuser simply clips into place. IK08 polycarbonate diffuser and housing vandal-proof. Suitable for ambient temperatures from -20°C to +40°C.
IP67 GU10 Recessed Ground Light as the perfect choice for residential outdoor environments. Corrosion-resistant body with 304 stainless steel bezel, A4 stainless steel screws and clear tempered glass diffuser (2.500kg load) with salt-spray protection. Supplied with integrated GU10 socket, waterproof junction box for simplified and reliable installation and 1 m rubber cable. Designed for ambient temperatures from –30 °C to +45 °C.
Colour & Wattage Switchable IP65 Die-Cast Aluminium Bulkhead with opal polycarbonate IK10 diffuser for even and uniform light distribution. 4 Wattage and 3 Colour Selections available for ultimate flexibility in every application. IP65 rated side and rear entry access wiring compartment enable quick and simple through-wiring and product installation. IK10 polycarbonate diffuser and Die Cast aluminium housing vandal-proof. Microwave Sensor version with adjustable daylight harvesting. Function (25lux/off), 108° detection range up to 4 meter and hold time configurations from 5 seconds to 10 minutes available.
Colour & Wattage Switchable IP65 Die-Cast Aluminium Bulkhead with opal polycarbonate IK10 diffuser for even and uniform light distribution. 4 Wattage and 3 Colour Selections available for ultimate flexibility in every application. IP65 rated side and rear entry access wiring compartment enable quick and simple through-wiring and product installation. IK10 polycarbonate diffuser and Die Cast aluminium housing vandal-proof.
Colour Switchable super-slim Aluminium edge-lite low profile LED Downlights are ideal for installations in limited recess space (23mm including driver). Wide product range covers most common cut-out dimensions of traditional light sources and delivers enhanced energy savings. PMMA light guide with PC diffusor for low glare even light distribution. Supplied with remote non-dimmable constant current driver and 150mm cable for ease of installation. Dimmable driver options as accessory.
Colour Switchable super-slim Aluminium edge-lite low profile LED Downlights are ideal for installations in limited recess space (23mm including driver). Wide product range covers most common cut-out dimensions of traditional light sources and delivers enhanced energy savings. PMMA light guide with PC diffusor for low glare even light distribution. Supplied with remote non-dimmable constant current driver and 150mm cable for ease of installation. Dimmable driver options as accessory.
Colour Switchable super-slim Aluminium edge-lite low profile LED Downlights are ideal for installations in limited recess space (23mm including driver). Wide product range covers most common cut-out dimensions of traditional light sources and delivers enhanced energy savings. PMMA light guide with PC diffusor for low glare even light distribution. Supplied with remote non-dimmable constant current driver and 150mm cable for ease of installation. Dimmable driver options as accessory.
Colour Switchable super-slim Aluminium edge-lite low profile LED Downlights are ideal for installations in limited recess space (23mm including driver). Wide product range covers most common cut-out dimensions of traditional light sources and delivers enhanced energy savings. PMMA light guide with PC diffusor for low glare even light distribution. Supplied with remote non-dimmable constant current driver and 150mm cable for ease of installation. Dimmable driver options as accessory.
Colour Switchable super-slim Aluminium edge-lite low profile LED Downlights are ideal for installations in limited recess space (23mm including driver). Wide product range covers most common cut-out dimensions of traditional light sources and delivers enhanced energy savings. PMMA light guide with PC diffusor for low glare even light distribution. Supplied with remote non-dimmable constant current driver and 150mm cable for ease of installation. Dimmable driver options as accessory.
The DR149635 driver is a phase cut dimmable driver. It is delivered pre-wired with350 mm of 2-conductor cable on the primary side and a 1/2 connectorized cord for connection to the luminaire. Dimming range from 5-15 to 100% (minimum brightness may vary depending on the performance of the dimmer used). No flicker and smooth dimming in all light conditions. Leading and trailing edge compatible.
This website uses cookies to ensure you get the best experience on our website
Deutsch
Français
