Deutsch
Français
BATPAC CWS - EM157449
Emergency Pack 2.5W Constant Wattage Selftest for BatPacCWS™ CL149901 & CL149918
RANGES
There are 116 products.
Active filters
LED DRIVER - DR152840
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit, Overload and Over voltage protection.
Loop in/out on primary side, 3 X 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit, Overload and Over voltage protection.
Loop in/out on primary side, 3 X 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
LED DRIVER - DR154585
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit, Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit, Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
LED DRIVER - DR154592
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit, Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit, Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
LED DRIVER - DR154615
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit, Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit, Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
LED DRIVER - DR154622
Dimmable Phase Cut ( TRIAC) Constant Voltage (CV) LED driver.
SELV type with Short circuit, Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit, Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
LEDline - ST161460
Spotless COB IP67 Single Colour LED Strip delivers consistent, even light output with no dark spots ensuring perfectly illuminated spaces.
Ideal for continuous-line applications with reflective surfaces or clear sightlines of the luminaire without the need for frosted diffuser profiles.
Flexible installation with cut points every 20.8mm.
Beam angle of 150° and 384 LEDs per metre.
Connect individual lengths in parallel for runs longer than 5 metres.
Ideal for continuous-line applications with reflective surfaces or clear sightlines of the luminaire without the need for frosted diffuser profiles.
Flexible installation with cut points every 20.8mm.
Beam angle of 150° and 384 LEDs per metre.
Connect individual lengths in parallel for runs longer than 5 metres.
LEDline - ST161477
Spotless COB IP67 Single Colour LED Strip delivers consistent, even light output with no dark spots ensuring perfectly illuminated spaces.
Ideal for continuous-line applications with reflective surfaces or clear sightlines of the luminaire without the need for frosted diffuser profiles.
Flexible installation with cut points every 20.8mm.
Beam angle of 150° and 384 LEDs per metre.
Connect individual lengths in parallel for runs longer than 5 metres.
Ideal for continuous-line applications with reflective surfaces or clear sightlines of the luminaire without the need for frosted diffuser profiles.
Flexible installation with cut points every 20.8mm.
Beam angle of 150° and 384 LEDs per metre.
Connect individual lengths in parallel for runs longer than 5 metres.
LEDline - ST161484
Spotless COB IP67 Single Colour LED Strip delivers consistent, even light output with no dark spots ensuring perfectly illuminated spaces.
Ideal for continuous-line applications with reflective surfaces or clear sightlines of the luminaire without the need for frosted diffuser profiles.
Flexible installation with cut points every 20.8mm.
Beam angle of 150° and 384 LEDs per metre.
Connect individual lengths in parallel for runs longer than 5 metres.
Ideal for continuous-line applications with reflective surfaces or clear sightlines of the luminaire without the need for frosted diffuser profiles.
Flexible installation with cut points every 20.8mm.
Beam angle of 150° and 384 LEDs per metre.
Connect individual lengths in parallel for runs longer than 5 metres.
LEDline - ST161569
Spotless COB IP20 Single Colour LED Strip delivers consistent, even light output with no dark spots ensuring perfectly illuminated spaces.
Ideal for continuous-line applications with reflective surfaces or clear sightlines of the luminaire without the need for frosted diffuser profiles.
Flexible installation with cut points every 20.8mm.
Beam angle of 150° and 384 LEDs per metre.
Connect individual lengths in parallel for runs longer than 5 metres.
Ideal for continuous-line applications with reflective surfaces or clear sightlines of the luminaire without the need for frosted diffuser profiles.
Flexible installation with cut points every 20.8mm.
Beam angle of 150° and 384 LEDs per metre.
Connect individual lengths in parallel for runs longer than 5 metres.
LEDline - ST161576
Spotless COB IP20 Single Colour LED Strip delivers consistent, even light output with no dark spots ensuring perfectly illuminated spaces.
Ideal for continuous-line applications with reflective surfaces or clear sightlines of the luminaire without the need for frosted diffuser profiles.
Flexible installation with cut points every 20.8mm.
Beam angle of 150° and 384 LEDs per metre.
Connect individual lengths in parallel for runs longer than 5 metres.
Ideal for continuous-line applications with reflective surfaces or clear sightlines of the luminaire without the need for frosted diffuser profiles.
Flexible installation with cut points every 20.8mm.
Beam angle of 150° and 384 LEDs per metre.
Connect individual lengths in parallel for runs longer than 5 metres.
LEDline - ST161613
Spotless COB IP67 Single Colour LED Strip delivers consistent, even light output with no dark spots ensuring perfectly illuminated spaces.
Ideal for continuous-line applications with reflective surfaces or clear sightlines of the luminaire without the need for frosted diffuser profiles.
Flexible installation with cut points every 20.8mm.
Beam angle of 150° and 384 LEDs per metre.
Connect individual lengths in parallel for runs longer than 5 metres.
Ideal for continuous-line applications with reflective surfaces or clear sightlines of the luminaire without the need for frosted diffuser profiles.
Flexible installation with cut points every 20.8mm.
Beam angle of 150° and 384 LEDs per metre.
Connect individual lengths in parallel for runs longer than 5 metres.