Deutsch
Français
RANGES
There are 93 products.
Active filters
CosmosEcoWS - HB159139
Wattage Selectable High Power IK10 impact resistant IP65 LED Highbay offers best value for money with an efficiency of 160m/W.
Integrated non dimmable LED driver pre-wired with 1500mm cable for ease of installation. 800mm safety cable included.
110° polycarbonate lense supplied as standard. Aluminium and Acrylic reflector available as accessory.
Suitable for -40° - +50° ambient working temperature.
Integrated non dimmable LED driver pre-wired with 1500mm cable for ease of installation. 800mm safety cable included.
110° polycarbonate lense supplied as standard. Aluminium and Acrylic reflector available as accessory.
Suitable for -40° - +50° ambient working temperature.
DALI DRIVER - DR159443
The DR159443 driver is a dimmable DALI-2 and PushDIM driver with adjustable constant current. It is supplied complete with a IP65 cable for connection to the luminaire.
Dimming range from 1 to 100%.
No flicker and smooth dimming in all light conditions.
Output current adjustment ( 10 levels ) by means of micro-switches.
Support CBS , central emergency application.
Independent cable clamps ( inlet / outlet ).
Dimming range from 1 to 100%.
No flicker and smooth dimming in all light conditions.
Output current adjustment ( 10 levels ) by means of micro-switches.
Support CBS , central emergency application.
Independent cable clamps ( inlet / outlet ).
FaloCS - DL149581
Colour Switchable IP44 Adjustable LED Downlight (120lm/W) with integrated Triac Dimmable LED driver. Coverable with any type of insulation material and airtight tested.
Rapid tool-free installation through loop in/loop out push-fit wiring terminals with strain relief.
Compact integrated low profile design with insulation cover allow for use in shallow voids up to 50mm.
Colour Switchable between 2700/3000/4000K.
LEDchroic lens design with 60° beam angle imitates the appearance of halogen lamps and provides controlled, uniform light distribution with minimal glare.
Rapid tool-free installation through loop in/loop out push-fit wiring terminals with strain relief.
Compact integrated low profile design with insulation cover allow for use in shallow voids up to 50mm.
Colour Switchable between 2700/3000/4000K.
LEDchroic lens design with 60° beam angle imitates the appearance of halogen lamps and provides controlled, uniform light distribution with minimal glare.
LED DRIVER - DR152840
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit, Overload and Over voltage protection.
Loop in/out on primary side, 3 X 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit, Overload and Over voltage protection.
Loop in/out on primary side, 3 X 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
LED DRIVER - DR154585
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit, Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit, Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
LED DRIVER - DR154592
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit, Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit, Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
LED DRIVER - DR154615
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit, Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit, Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
LED DRIVER - DR154622
Dimmable Phase Cut ( TRIAC) Constant Voltage (CV) LED driver.
SELV type with Short circuit, Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit, Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
LEDline - DR154639
Dimmable Phase Cut ( TRIAC) Constant Voltage (CV) LED driver.
SELV type with Short circuit, Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit, Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
LEDline - ST153038
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDline - ST153045
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDline - ST153052
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
