The DR159511 driver is a dimmable 1-10V driver with adjustable constant current. It is supplied complete with an IP65 cable for connection to the luminaire. Dimming range from 5 to 100%. No flicker and smooth dimming in all light conditions. Output current adjustment ( 10 levels ) by means of micro-switches. Support CBS , central emergency application. Independent cable clamps ( inlet / outlet ).
Cost effective and super reliable GU10 lamp range with advanced thermal management to control key component temperatures. Single Colour version with LEDchroic lens design with 38° beam angle imitates the appearance of halogen lamps and provides controlled, uniform light distribution with minimal glare. Designed and tested for suitable use in enclosed fire rated and insulation coverable lighting fixtures. Excellent dimming compatibility with all market common dimmers in Europe.
Cost effective and super reliable GU10 lamp range with advanced thermal management to control key component temperatures. Single Colour version with LEDchroic lens design with 38° beam angle imitates the appearance of halogen lamps and provides controlled, uniform light distribution with minimal glare. Designed and tested for suitable use in enclosed fire rated and insulation coverable lighting fixtures. Excellent dimming compatibility with all market common dimmers in Europe.
Cost effective and super reliable GU10 lamp range with advanced thermal management to control key component temperatures. Single Colour version with LEDchroic lens design with 38° beam angle imitates the appearance of halogen lamps and provides controlled, uniform light distribution with minimal glare. Designed and tested for suitable use in enclosed fire rated and insulation coverable lighting fixtures. Excellent dimming compatibility with all market common dimmers in Europe.
Cost effective and super reliable GU10 lamp range with advanced thermal management to control key component temperatures. Single Colour version with LEDchroic lens design with 38° beam angle imitates the appearance of halogen lamps and provides controlled, uniform light distribution with minimal glare. Designed and tested for suitable use in enclosed fire rated and insulation coverable lighting fixtures. Excellent dimming compatibility with all market common dimmers in Europe.
Cost effective and super reliable GU10 lamp range with advanced thermal management to control key component temperatures. Colour Selectable version with 3CCT Dip switch in 38° lense to select colour temperature before or even after installation between 2700K/3200K/4000K. Designed and tested for suitable use in enclosed fire rated and insulation coverable lighting fixtures. Excellent dimming compatibility with all market common dimmers in Europe.
The DR159443 driver is a dimmable DALI-2 and PushDIM driver with adjustable constant current. It is supplied complete with a IP65 cable for connection to the luminaire. Dimming range from 1 to 100%. No flicker and smooth dimming in all light conditions. Output current adjustment ( 10 levels ) by means of micro-switches. Support CBS , central emergency application. Independent cable clamps ( inlet / outlet ).
Non-dimmable Constant Voltage (CV) LED driver. SELV type with Short circuit, Overload and Over voltage protection. Loop in/out on primary side, 3 X 24 VDC outputs on screw terminal block. IP20 for indoor use. Independent cable clamps ( inlet / outlet ).
Non-dimmable Constant Voltage (CV) LED driver. SELV type with Short circuit, Overload and Over voltage protection. 2 x 24 VDC outputs on screw terminal block. IP20 for indoor use. Independent cable clamps ( inlet / outlet ).
Non-dimmable Constant Voltage (CV) LED driver. SELV type with Short circuit, Overload and Over voltage protection. 2 x 24 VDC outputs on screw terminal block. IP20 for indoor use. Independent cable clamps ( inlet / outlet ).
Non-dimmable Constant Voltage (CV) LED driver. SELV type with Short circuit, Overload and Over voltage protection. 2 x 24 VDC outputs on screw terminal block. IP20 for indoor use. Independent cable clamps ( inlet / outlet ).
Dimmable Phase Cut ( TRIAC) Constant Voltage (CV) LED driver. SELV type with Short circuit, Overload and Over voltage protection. 2 x 24 VDC outputs on screw terminal block. IP20 for indoor use. Independent cable clamps ( inlet / outlet ).
Cost effective and super reliable GU10 lamp range with advanced thermal management to control key component temperatures. Single Colour version with LEDchroic lens design with 38° beam angle imitates the appearance of halogen lamps and provides controlled, uniform light distribution with minimal glare. Designed and tested for suitable use in enclosed fire rated and insulation coverable lighting fixtures. Excellent dimming compatibility with all market common dimmers in Europe.
Single colour high intensity COB LED Strip with 3m self adhesive backing for continuous light without LED hotspots. Cut points every 50mm for maximum flexibility. Beam angle of 150° and 480 LEDs per metre. For runs over 5 metres individual lenghts should be connected in parallel.
Single colour high intensity COB LED Strip with 3m self adhesive backing for continuous light without LED hotspots. Cut points every 50mm for maximum flexibility. Beam angle of 150° and 480 LEDs per metre. For runs over 5 metres individual lenghts should be connected in parallel.
Single colour high intensity COB LED Strip with 3m self adhesive backing for continuous light without LED hotspots. Cut points every 50mm for maximum flexibility. Beam angle of 150° and 480 LEDs per metre. For runs over 5 metres individual lenghts should be connected in parallel.
Single colour high intensity COB LED Strip with 3m self adhesive backing for continuous light without LED hotspots. Cut points every 50mm for maximum flexibility. Beam angle of 150° and 480 LEDs per metre. For runs over 5 metres individual lenghts should be connected in parallel.
Single colour high intensity COB LED Strip with 3m self adhesive backing for continuous light without LED hotspots. Cut points every 50mm for maximum flexibility. Beam angle of 150° and 480 LEDs per metre. For runs over 5 metres individual lenghts should be connected in parallel.
This website uses cookies to ensure you get the best experience on our website
Deutsch
Français
