Deutsch
Français
RANGES
There are 25 products.
Active filters
COSMOS PRO - HB158750
Polycarbonate Reflector for Cosmos™ HB157357, HB153908 & HB153922 and HB159139
G-LITE PRO - OD154745
IP67 GU10 Recessed Ground Light as the perfect choice for residential outdoor environments.
Corrosion-resistant body with 304 stainless steel bezel, A4 stainless steel screws and clear tempered glass diffuser (2.500kg load) with salt-spray protection.
Supplied with integrated GU10 socket and two waterproof cable glands for safe and secure through-wiring in outdoor applications.
Designed for ambient temperatures from –30 °C to +45 °C.
Corrosion-resistant body with 304 stainless steel bezel, A4 stainless steel screws and clear tempered glass diffuser (2.500kg load) with salt-spray protection.
Supplied with integrated GU10 socket and two waterproof cable glands for safe and secure through-wiring in outdoor applications.
Designed for ambient temperatures from –30 °C to +45 °C.
LED DRIVER - DR152840
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit, Overload and Over voltage protection.
Loop in/out on primary side, 3 X 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit, Overload and Over voltage protection.
Loop in/out on primary side, 3 X 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
LED DRIVER - DR154585
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit, Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit, Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
LED DRIVER - DR154592
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit, Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit, Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
LED DRIVER - DR154615
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit, Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit, Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
LED DRIVER - DR154622
Dimmable Phase Cut ( TRIAC) Constant Voltage (CV) LED driver.
SELV type with Short circuit, Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit, Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
LEDlineCOB - ST152987
Single colour high intensity COB LED Strip with 3m self adhesive backing for continuous light without LED hotspots.
Cut points every 50mm for maximum flexibility.
Beam angle of 150° and 480 LEDs per metre.
For runs over 5 metres individual lenghts should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 150° and 480 LEDs per metre.
For runs over 5 metres individual lenghts should be connected in parallel.
LEDlineCOB - ST152994
Single colour high intensity COB LED Strip with 3m self adhesive backing for continuous light without LED hotspots.
Cut points every 50mm for maximum flexibility.
Beam angle of 150° and 480 LEDs per metre.
For runs over 5 metres individual lenghts should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 150° and 480 LEDs per metre.
For runs over 5 metres individual lenghts should be connected in parallel.
LEDlineCOB - ST153007
Single colour high intensity COB LED Strip with 3m self adhesive backing for continuous light without LED hotspots.
Cut points every 50mm for maximum flexibility.
Beam angle of 150° and 480 LEDs per metre.
For runs over 5 metres individual lenghts should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 150° and 480 LEDs per metre.
For runs over 5 metres individual lenghts should be connected in parallel.
LEDlineCOB - ST153014
Single colour high intensity COB LED Strip with 3m self adhesive backing for continuous light without LED hotspots.
Cut points every 50mm for maximum flexibility.
Beam angle of 150° and 480 LEDs per metre.
For runs over 5 metres individual lenghts should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 150° and 480 LEDs per metre.
For runs over 5 metres individual lenghts should be connected in parallel.
LEDlineCOB - ST153021
Single colour high intensity COB LED Strip with 3m self adhesive backing for continuous light without LED hotspots.
Cut points every 50mm for maximum flexibility.
Beam angle of 150° and 480 LEDs per metre.
For runs over 5 metres individual lenghts should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 150° and 480 LEDs per metre.
For runs over 5 metres individual lenghts should be connected in parallel.