The DR159436 driver is a dimmable (0) 1-10V, DALI-2 and PushDIM driver with adjustable constant current. It is supplied complete with a cable for connection to the luminaire. Dimming range from 1 to 100%. No flicker and smooth dimming in all light conditions. Output current adjustment ( 10 levels ) by means of micro-switches. Support CBS , central emergency application. Independent cable clamps ( inlet / outlet ).
Colour Switchable IP44 Adjustable LED Downlight (120lm/W) with integrated Triac Dimmable LED driver. Coverable with any type of insulation material and airtight tested. Rapid tool-free installation through loop in/loop out push-fit wiring terminals with strain relief. Compact integrated low profile design with insulation cover allow for use in shallow voids up to 50mm. Colour Switchable between 2700/3000/4000K. LEDchroic lens design with 60° beam angle imitates the appearance of halogen lamps and provides controlled, uniform light distribution with minimal glare.
Wattage Selectable High Power IK10 impact resistant IP65 LED Highbay with superior efficiency of up to 185lm/W. Tool free interchangeable Lense design. Comes with 110° lense as standard, 90° lense options available as accessory. Integrated 0-10V dimmable LED driver pre-wired with 1500mm cable/220mm dim wire for ease of installation. 800mm safety cable included. Zhaga base for plug and play Microwave or PIR Sensor Module with detection range up to 12m. Sensor options available as accessory. Suitable for -40° - +50° ambient working temperature.
IP65 18W Bulkhead with opal polycarbonate IK10 diffuser for even and uniform light distribution offer best value for money. IP65 rated rear and side entry access wiring compartment enable quick and simple through-wiring and product installation. Microwave Sensor version with daylight harvesting feature, 110° detection range up to 4 meter and adjustable hold time configurations from 5 seconds to 30 minutes available. UV resistant and suitable for installations in unprotected outdoor areas with ambient temperatures from -25°C to +45°C.
IP65 18W Bulkhead with opal polycarbonate IK10 diffuser for even and uniform light distribution offer best value for money. IP65 rated rear and side entry access wiring compartment enable quick and simple through-wiring and product installation. Microwave Sensor version with daylight harvesting feature, 110° detection range up to 4 meter and adjustable hold time configurations from 5 seconds to 30 minutes available. UV resistant and suitable for installations in unprotected outdoor areas with ambient temperatures from -25°C to +45°C.
Colour & Wattage Switchable Baffled Triac dimmable LED Fire Rated LED Downlight. IP65 sleek baffled design to reduce glare. Supplied with White Aluminium Bezel. Black and Satin Nickel options available. Rapid tool-free installation through loop in / loop out push-fit wiring terminals with strain relief. Compact integrated design with insulation cover allow for use in shallow voids up to 73mm. Downlight and driver are insulation coverable. Tested in 30 and 60 minutes fire-rated ceilings according to EN1365-2.
Colour Switchable super-slim Aluminium edge-lite low profile LED Downlights are ideal for installations in limited recess space (23mm including driver). Wide product range covers most common cut-out dimensions of traditional light sources and delivers enhanced energy savings. PMMA light guide with PC diffusor for low glare even light distribution. Supplied with remote non-dimmable constant current driver and 150mm cable for ease of installation. Dimmable driver options as accessory.
Colour Switchable super-slim Aluminium edge-lite low profile LED Downlights are ideal for installations in limited recess space (23mm including driver). Wide product range covers most common cut-out dimensions of traditional light sources and delivers enhanced energy savings. PMMA light guide with PC diffusor for low glare even light distribution. Supplied with remote non-dimmable constant current driver and 150mm cable for ease of installation. Dimmable driver options as accessory.
Colour Switchable super-slim Aluminium edge-lite low profile LED Downlights are ideal for installations in limited recess space (23mm including driver). Wide product range covers most common cut-out dimensions of traditional light sources and delivers enhanced energy savings. PMMA light guide with PC diffusor for low glare even light distribution. Supplied with remote non-dimmable constant current driver and 150mm cable for ease of installation. Dimmable driver options as accessory.
Colour Switchable super-slim Aluminium edge-lite low profile LED Downlights are ideal for installations in limited recess space (23mm including driver). Wide product range covers most common cut-out dimensions of traditional light sources and delivers enhanced energy savings. PMMA light guide with PC diffusor for low glare even light distribution. Supplied with remote non-dimmable constant current driver and 150mm cable for ease of installation. Dimmable driver options as accessory.
Colour Switchable super-slim Aluminium edge-lite low profile LED Downlights are ideal for installations in limited recess space (23mm including driver). Wide product range covers most common cut-out dimensions of traditional light sources and delivers enhanced energy savings. PMMA light guide with PC diffusor for low glare even light distribution. Supplied with remote non-dimmable constant current driver and 150mm cable for ease of installation. Dimmable driver options as accessory.
The DR149635 driver is a phase cut dimmable driver. It is delivered pre-wired with350 mm of 2-conductor cable on the primary side and a 1/2 connectorized cord for connection to the luminaire. Dimming range from 5-15 to 100% (minimum brightness may vary depending on the performance of the dimmer used). No flicker and smooth dimming in all light conditions. Leading and trailing edge compatible.
The DR149642 driver is a phase cut dimmable driver. It is delivered pre-wired with350 mm of 2-conductor cable on the primary side and a 1/2 connectorized cord for connection to the luminaire. Dimming range from 5-15 to 100% (minimum brightness may vary depending on the performance of the dimmer used). No flicker and smooth dimming in all light conditions. Leading and trailing edge compatible.
The DR149659 driver is a phase cut dimmable driver. It is delivered pre-wired with350 mm of 2-conductor cable on the primary side and a 1/2 connectorized cord for connection to the luminaire. Dimming range from 5-15 to 100% (minimum brightness may vary depending on the performance of the dimmer used). No flicker and smooth dimming in all light conditions. Leading and trailing edge compatible.
The DR149666 driver is a phase cut dimmable driver. It is delivered pre-wired with350 mm of 2-conductor cable on the primary side and a 1/2 connectorized cord for connection to the luminaire. Dimming range from 5-15 to 100% (minimum brightness may vary depending on the performance of the dimmer used). No flicker and smooth dimming in all light conditions. Leading and trailing edge compatible.
This website uses cookies to ensure you get the best experience on our website
Deutsch
Français
