The DR159474 driver is a dimmable 1-10V driver with adjustable constant current. It is supplied complete with a cable for connection to the luminaire. Dimming range from 5 to 100%. No flicker and smooth dimming in all light conditions. Output current adjustment ( 10 levels ) by means of micro-switches. Support CBS , central emergency application. Independent cable clamps ( inlet / outlet ).
IP65 GU10 Fire Rated Downlight including GU10 lamp and Fixed Aluminium Bezel. Designed to seal ceilings completely. Rapid installation through loop in/loop out push-fit wiring terminals with strain relief. Fully insulation coverable (blown or unwound) without the need of additional accessory or insulation cut-out. Vapour-barrier compatible. ISOPRO Kit includes the GU10 ICE lamp with superior thermal management which has been specifically designed and tested in closed fire rated and insulation covered downlights Tested in 30, 60 and 90 minutes fire-rated ceilings according to EN1365-2. Airtight and Acoustics rated.
IP65 GU10 Fire Rated Downlight including GU10 lamp and Fixed Aluminium Bezel. Designed to seal ceilings completely. Rapid installation through loop in/loop out push-fit wiring terminals with strain relief. Fully insulation coverable (blown or unwound) without the need of additional accessory or insulation cut-out. Vapour-barrier compatible. ISOPRO Kit includes the GU10 ICE lamp with superior thermal management which has been specifically designed and tested in closed fire rated and insulation covered downlights Tested in 30, 60 and 90 minutes fire-rated ceilings according to EN1365-2. Airtight and Acoustics rated.
High-efficiency (140lm/W) IP65 corrosion-resistant linear batten with opal diffuser for even and uniform light distribution. IP65 rated cable glands on both ends as well as at rear entrance enable quick and simple through-wiring and product installation. Quick release hinged gear tray with durable stainless steel anti-tamper clips fitted for faster installation and maintenance. After the base is secured, the diffuser simply clips into place. IK08 polycarbonate diffuser and housing vandal-proof. Suitable for ambient temperatures from -20°C to +40°C.
High-efficiency (140lm/W) IP65 corrosion-resistant linear batten with opal diffuser for even and uniform light distribution. IP65 rated cable glands on both ends as well as at rear entrance enable quick and simple through-wiring and product installation. Quick release hinged gear tray with durable stainless steel anti-tamper clips fitted for faster installation and maintenance. After the base is secured, the diffuser simply clips into place. IK08 polycarbonate diffuser and housing vandal-proof. Suitable for ambient temperatures from -20°C to +40°C.
High-efficiency (140lm/W) IP65 corrosion-resistant linear batten with opal diffuser for even and uniform light distribution. IP65 rated cable glands on both ends as well as at rear entrance enable quick and simple through-wiring and product installation. Quick release hinged gear tray with durable stainless steel anti-tamper clips fitted for faster installation and maintenance. After the base is secured, the diffuser simply clips into place. IK08 polycarbonate diffuser and housing vandal-proof. Suitable for ambient temperatures from -20°C to +40°C.
High-efficiency (140lm/W) IP65 corrosion-resistant linear batten with opal diffuser for even and uniform light distribution. IP65 rated cable glands on both ends as well as at rear entrance enable quick and simple through-wiring and product installation. Quick release hinged gear tray with durable stainless steel anti-tamper clips fitted for faster installation and maintenance. After the base is secured, the diffuser simply clips into place. IK08 polycarbonate diffuser and housing vandal-proof. Suitable for ambient temperatures from -20°C to +40°C.
High-efficiency (140lm/W) IP65 corrosion-resistant linear batten with opal diffuser for even and uniform light distribution. IP65 rated cable glands on both ends as well as at rear entrance enable quick and simple through-wiring and product installation. Quick release hinged gear tray with durable stainless steel anti-tamper clips fitted for faster installation and maintenance. After the base is secured, the diffuser simply clips into place. IK08 polycarbonate diffuser and housing vandal-proof. Suitable for ambient temperatures from -20°C to +40°C.
High-efficiency (140lm/W) IP65 corrosion-resistant linear batten with opal diffuser for even and uniform light distribution. IP65 rated cable glands on both ends as well as at rear entrance enable quick and simple through-wiring and product installation. Quick release hinged gear tray with durable stainless steel anti-tamper clips fitted for faster installation and maintenance. After the base is secured, the diffuser simply clips into place. IK08 polycarbonate diffuser and housing vandal-proof. Suitable for ambient temperatures from -20°C to +40°C.
The DR159412 driver is a dimmable DALI-2 and PushDIM driver with adjustable constant current. It is supplied complete with a cable for connection to the luminaire. Dimming range from 1 to 100%. No flicker and smooth dimming in all light conditions. Output current adjustment ( 10 levels ) by means of micro-switches. Support CBS , central emergency application. Independent cable clamps ( inlet / outlet ).
Dimmable Phase Cut ( TRIAC) Constant Voltage (CV) LED driver. SELV type with Short circuit; Overload and Over voltage protection. 2 x 24 VDC outputs on screw terminal block. IP20 for indoor use. Independent cable clamps ( inlet / outlet ).
Non-dimmable Constant Voltage (CV) LED driver. SELV type with Short circuit; Overload and Over voltage protection. 2 x 24 VDC outputs on screw terminal block. IP20 for indoor use. Independent cable clamps ( inlet / outlet ).
Non-dimmable Constant Voltage (CV) LED driver. SELV type with Short circuit; Overload and Over voltage protection. 2 x 24 VDC outputs on screw terminal block. IP20 for indoor use. Independent cable clamps ( inlet / outlet ).
Non-dimmable Constant Voltage (CV) LED driver. SELV type with Short circuit; Overload and Over voltage protection. 2 x 24 VDC outputs on screw terminal block. IP20 for indoor use. Independent cable clamps ( inlet / outlet ).
Non-dimmable Constant Voltage (CV) LED driver. SELV type with Short circuit; Overload and Over voltage protection. Loop in/out on primary side; 3 X 24 VDC outputs on screw terminal block. IP20 for indoor use. Independent cable clamps ( inlet / outlet ).
3 Circuit Track LED Spotlight designed to provide the best qualitative and effective lighting on display surfaces with superior luminaire efficiency of up to 135 lm/W. Wattage switch located at the back of the product for simple adjustment of light output even after the initial store opening. Intrack driver supports a super compact and sleek body finish. 350° horizontal and 90° vertical adjustment to adapt to changing points of sales environments in stores. Interchangeable high-efficiency reflectors available as accessories in 24°, 36° and 52° beam angles as well as Low glare louver and Honeycomb cover. Plug and Play high colour rendering COB (CRI95) enables product maintenance when reaching the end of product life.
3 Circuit Track LED Spotlight designed to provide the best qualitative and effective lighting on display surfaces with superior luminaire efficiency of up to 135 lm/W. Wattage switch located at the back of the product for simple adjustment of light output even after the initial store opening. Intrack driver supports a super compact and sleek body finish. 350° horizontal and 90° vertical adjustment to adapt to changing points of sales environments in stores. Interchangeable high-efficiency reflectors available as accessories in 24°, 36° and 52° beam angles as well as Low glare louver and Honeycomb cover. Plug and Play high colour rendering COB (CRI95) enables product maintenance when reaching the end of product life.
3 Circuit Track LED Spotlight designed to provide the best qualitative and effective lighting on display surfaces with superior luminaire efficiency of up to 135 lm/W. Wattage switch located at the back of the product for simple adjustment of light output even after the initial store opening. Intrack driver supports a super compact and sleek body finish. 350° horizontal and 90° vertical adjustment to adapt to changing points of sales environments in stores. Interchangeable high-efficiency reflectors available as accessories in 24°, 36° and 52° beam angles as well as Low glare louver and Honeycomb cover. Plug and Play high colour rendering COB (CRI95) enables product maintenance when reaching the end of product life.
This website uses cookies to ensure you get the best experience on our website
Deutsch
Français
