Deutsch
Français
RANGES
There are 54 products.
LEDline - ST156213
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDline - ST156220
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDline - ST156367
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 5 metres individual lengths should be connected in parallel.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 5 metres individual lengths should be connected in parallel.
LEDline - ST156435
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDline - ST159665
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
made by concatenation
Dimmable Phase Cut ( TRIAC) Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
Loop in/out on primary side; 3 X 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
Loop in/out on primary side; 3 X 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
ONExD2W - DL158330
Dim-to-Warm Colour & Wattage Switchable Convertible Triac dimmable LED Fire Rated LED Downlight allows to create with the D2W dip switch selection a cozy athmosphere while dimming.
Colour mode selector on the back-side of product allows you to close between Dim2Warm and two additional colour variants, giving full control over lighting style and ambience while using the same product across multiple environments.
Rapid tool-free installation through loop in / loop out push-fit wiring terminals with strain relief.
Compact integrated low profile design with insulation cover allow for use in shallow voids up to 50mm. Downlight and driver are insulation coverable.
Tested in 30 and 60 minutes fire-rated ceilings according to EN1365-2.
Colour mode selector on the back-side of product allows you to close between Dim2Warm and two additional colour variants, giving full control over lighting style and ambience while using the same product across multiple environments.
Rapid tool-free installation through loop in / loop out push-fit wiring terminals with strain relief.
Compact integrated low profile design with insulation cover allow for use in shallow voids up to 50mm. Downlight and driver are insulation coverable.
Tested in 30 and 60 minutes fire-rated ceilings according to EN1365-2.
Uni-Fit Baffle CS - DL150495
Colour Switchable Compact Integrated IP44 low Glare Commercial LED Downlight range are a perfect value for money solution for new commercial applications or upgrading from compact fluorescent fittings in existing environments.
Low glare baffled aluminium specular reflector provides great glare control and even light distribution.
Colour Switchable between 3000/4000K for an on-site adaptation.
Supplied with slight recessed white bezel frame.
Integrated non-dimmable driver and pre-wired with 500mm cable for ease of installation.
Low glare baffled aluminium specular reflector provides great glare control and even light distribution.
Colour Switchable between 3000/4000K for an on-site adaptation.
Supplied with slight recessed white bezel frame.
Integrated non-dimmable driver and pre-wired with 500mm cable for ease of installation.
Uni-Fit Baffle CS - DL150501
Colour Switchable Compact Integrated IP44 low Glare Commercial LED Downlight range are a perfect value for money solution for new commercial applications or upgrading from compact fluorescent fittings in existing environments.
Low glare baffled aluminium specular reflector provides great glare control and even light distribution.
Colour Switchable between 3000/4000K for an on-site adaptation.
Supplied with slight recessed white bezel frame.
Integrated non-dimmable driver and pre-wired with 500mm cable for ease of installation.
Low glare baffled aluminium specular reflector provides great glare control and even light distribution.
Colour Switchable between 3000/4000K for an on-site adaptation.
Supplied with slight recessed white bezel frame.
Integrated non-dimmable driver and pre-wired with 500mm cable for ease of installation.
Uni-Fit Baffle CS - DL150518
Colour Switchable Compact Integrated IP44 low Glare Commercial LED Downlight range are a perfect value for money solution for new commercial applications or upgrading from compact fluorescent fittings in existing environments.
Low glare baffled aluminium specular reflector provides great glare control and even light distribution.
Colour Switchable between 3000/4000K for an on-site adaptation.
Supplied with slight recessed white bezel frame.
Integrated non-dimmable driver and pre-wired with 500mm cable for ease of installation.
Low glare baffled aluminium specular reflector provides great glare control and even light distribution.
Colour Switchable between 3000/4000K for an on-site adaptation.
Supplied with slight recessed white bezel frame.
Integrated non-dimmable driver and pre-wired with 500mm cable for ease of installation.
Uni-Fit Baffle CS - DL150525
Colour Switchable Compact Integrated IP44 low Glare Commercial LED Downlight range are a perfect value for money solution for new commercial applications or upgrading from compact fluorescent fittings in existing environments.
Low glare baffled aluminium specular reflector provides great glare control and even light distribution.
Colour Switchable between 3000/4000K for an on-site adaptation.
Supplied with slight recessed white bezel frame.
Integrated non-dimmable driver and pre-wired with 500mm cable for ease of installation.
Low glare baffled aluminium specular reflector provides great glare control and even light distribution.
Colour Switchable between 3000/4000K for an on-site adaptation.
Supplied with slight recessed white bezel frame.
Integrated non-dimmable driver and pre-wired with 500mm cable for ease of installation.