Deutsch
Français
RANGES
There are 59 products.
Active filters
LEDline - ST156213
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDline - ST156220
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDline - ST156367
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 5 metres individual lengths should be connected in parallel.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 5 metres individual lengths should be connected in parallel.
LEDline - ST156435
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDline - ST159665
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
made by concatenation
The DR159511 driver is a dimmable 1-10V driver with adjustable constant current. It is supplied complete with an IP65 cable for connection to the luminaire.
Dimming range from 5 to 100%.
No flicker and smooth dimming in all light conditions.
Output current adjustment ( 10 levels ) by means of micro-switches.
Support CBS , central emergency application.
Independent cable clamps ( inlet / outlet ).
Dimming range from 5 to 100%.
No flicker and smooth dimming in all light conditions.
Output current adjustment ( 10 levels ) by means of micro-switches.
Support CBS , central emergency application.
Independent cable clamps ( inlet / outlet ).
made by concatenation
The DR159443 driver is a dimmable DALI-2 and PushDIM driver with adjustable constant current. It is supplied complete with a IP65 cable for connection to the luminaire.
Dimming range from 1 to 100%.
No flicker and smooth dimming in all light conditions.
Output current adjustment ( 10 levels ) by means of micro-switches.
Support CBS , central emergency application.
Independent cable clamps ( inlet / outlet ).
Dimming range from 1 to 100%.
No flicker and smooth dimming in all light conditions.
Output current adjustment ( 10 levels ) by means of micro-switches.
Support CBS , central emergency application.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Dimmable Phase Cut ( TRIAC) Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
Loop in/out on primary side; 3 X 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
Loop in/out on primary side; 3 X 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
IP65 VersiTile LED BackLit panel with an efficiency of 120lm/W is the perfect choice for highly demanding environments such as healthcare, kitchens and commercial.
IP65 rated front- and backside as well as metal grommet and valve enable a reliable and secure installation.
PMMA lens technology with high transmission microprismatic and waterproof diffuser provides excellent glare control and high uniformity with an UGR19.
Flicker-free IP65 rated LED driver pre-wired for simplified and fast installation.
IP65 rated front- and backside as well as metal grommet and valve enable a reliable and secure installation.
PMMA lens technology with high transmission microprismatic and waterproof diffuser provides excellent glare control and high uniformity with an UGR19.
Flicker-free IP65 rated LED driver pre-wired for simplified and fast installation.
made by concatenation
High-Efficiency (150 lm/W) IP69K Corrosion-Resistant Linear Batten with opal UV-resistant polycarbonate diffuser, IK10 rated for maximum impact resistance.
IP69K rated and designed for environments requiring heavy wash-down cleaning.
Supplied with 316 stainless steel end-caps and mounting brackets for simplified surface installation.
Integrated flicker-free, non-dimmable driver with IP69K cable glands on both ends and 3pol push terminals for safe, rapid through-wiring.
UV resistant and suitable for installations in unprotected outdoor areas with ambient temperatures from –20 °C to +45 °C.
IP69K rated and designed for environments requiring heavy wash-down cleaning.
Supplied with 316 stainless steel end-caps and mounting brackets for simplified surface installation.
Integrated flicker-free, non-dimmable driver with IP69K cable glands on both ends and 3pol push terminals for safe, rapid through-wiring.
UV resistant and suitable for installations in unprotected outdoor areas with ambient temperatures from –20 °C to +45 °C.
made by concatenation
High-Efficiency (150 lm/W) IP69K Corrosion-Resistant Linear Batten with opal UV-resistant polycarbonate diffuser, IK10 rated for maximum impact resistance.
IP69K rated and designed for environments requiring heavy wash-down cleaning.
Supplied with 316 stainless steel end-caps and mounting brackets for simplified surface installation.
Integrated flicker-free, non-dimmable driver with IP69K cable glands on both ends and 3pol push terminals for safe, rapid through-wiring.
UV resistant and suitable for installations in unprotected outdoor areas with ambient temperatures from –20 °C to +45 °C.
IP69K rated and designed for environments requiring heavy wash-down cleaning.
Supplied with 316 stainless steel end-caps and mounting brackets for simplified surface installation.
Integrated flicker-free, non-dimmable driver with IP69K cable glands on both ends and 3pol push terminals for safe, rapid through-wiring.
UV resistant and suitable for installations in unprotected outdoor areas with ambient temperatures from –20 °C to +45 °C.