Deutsch
Français
RANGES
There are 69 products.
Active filters
LEDline - ST156213
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDline - ST156220
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDline - ST156367
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 5 metres individual lengths should be connected in parallel.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 5 metres individual lengths should be connected in parallel.
LEDline - ST156435
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDline - ST159665
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LinearPacWS - AC156930
High-efficiency (150lm/W) IP65 corrosion-resistant linear batten with opal diffuser for even and uniform light distribution.
IP65 rated cable glands on both ends as well as at rear entrance enable quick and simple through-wiring and product installation.
Quick release hinged gear tray with durable stainless steel anti-tamper clips fitted for faster installation and maintenance. After the base is secured, the diffuser simply clips into place.
IK08 polycarbonate diffuser and housing vandal-proof. Suitable for ambient temperatures from -20°C to +40°C.
4 Wattage Selections available for ultimate flexibility in every application and perfect retrofit solution for single and twin fluorescent fittings.
IP65 rated cable glands on both ends as well as at rear entrance enable quick and simple through-wiring and product installation.
Quick release hinged gear tray with durable stainless steel anti-tamper clips fitted for faster installation and maintenance. After the base is secured, the diffuser simply clips into place.
IK08 polycarbonate diffuser and housing vandal-proof. Suitable for ambient temperatures from -20°C to +40°C.
4 Wattage Selections available for ultimate flexibility in every application and perfect retrofit solution for single and twin fluorescent fittings.
LinearPacWS - AC156947
High-efficiency (150lm/W) IP65 corrosion-resistant linear batten with opal diffuser for even and uniform light distribution.
IP65 rated cable glands on both ends as well as at rear entrance enable quick and simple through-wiring and product installation.
Quick release hinged gear tray with durable stainless steel anti-tamper clips fitted for faster installation and maintenance. After the base is secured, the diffuser simply clips into place.
IK08 polycarbonate diffuser and housing vandal-proof. Suitable for ambient temperatures from -20°C to +40°C.
4 Wattage Selections available for ultimate flexibility in every application and perfect retrofit solution for single and twin fluorescent fittings.
IP65 rated cable glands on both ends as well as at rear entrance enable quick and simple through-wiring and product installation.
Quick release hinged gear tray with durable stainless steel anti-tamper clips fitted for faster installation and maintenance. After the base is secured, the diffuser simply clips into place.
IK08 polycarbonate diffuser and housing vandal-proof. Suitable for ambient temperatures from -20°C to +40°C.
4 Wattage Selections available for ultimate flexibility in every application and perfect retrofit solution for single and twin fluorescent fittings.
made by concatenation
Dimmable Phase Cut ( TRIAC) Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
Loop in/out on primary side; 3 X 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
Loop in/out on primary side; 3 X 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Colour Switchable circuit track LED Spotlight with adjustable beam angle for maximal flexibility in retail environments.
Colour Switch located on back-site of Trackhead for simple adjustment of colour temperature between 2700K, 3200K and 4000K even after initial installation.
Beam angle adjustment and focusing through rotating front-cap between 60°, 38° and 24°. Different dial scale stand for individual aperture.
330° horizontal and 90° vertical adjustment to adapt to changing points of sales environments in stores.
Available for both single and three circuit track.
Colour Switch located on back-site of Trackhead for simple adjustment of colour temperature between 2700K, 3200K and 4000K even after initial installation.
Beam angle adjustment and focusing through rotating front-cap between 60°, 38° and 24°. Different dial scale stand for individual aperture.
330° horizontal and 90° vertical adjustment to adapt to changing points of sales environments in stores.
Available for both single and three circuit track.
made by concatenation
Colour Switchable circuit track LED Spotlight with adjustable beam angle for maximal flexibility in retail environments.
Colour Switch located on back-site of Trackhead for simple adjustment of colour temperature between 2700K, 3200K and 4000K even after initial installation.
Beam angle adjustment and focusing through rotating front-cap between 60°, 38° and 24°. Different dial scale stand for individual aperture.
330° horizontal and 90° vertical adjustment to adapt to changing points of sales environments in stores.
Available for both single and three circuit track.
Colour Switch located on back-site of Trackhead for simple adjustment of colour temperature between 2700K, 3200K and 4000K even after initial installation.
Beam angle adjustment and focusing through rotating front-cap between 60°, 38° and 24°. Different dial scale stand for individual aperture.
330° horizontal and 90° vertical adjustment to adapt to changing points of sales environments in stores.
Available for both single and three circuit track.
made by concatenation
Adjustable single circuit track spotlight and slimline track adaptor with GU10 6W Colour Selectable Lamp.
Track lighting offers maximum flexibility for retail and commercial applications where light sources must be adaptable for changes in displays. Ready made track kit available for simple installation. Available in black and white.
350° Adjustable Rotation & 90° Tilt.
Track lighting offers maximum flexibility for retail and commercial applications where light sources must be adaptable for changes in displays. Ready made track kit available for simple installation. Available in black and white.
350° Adjustable Rotation & 90° Tilt.