Deutsch
Français
ACCESSORIES
There are 19 products.
LumiCWS - DR157265
The DR157265 driver is a dimmable tunable white DALI-2 (DT8), PushDIM and PushCCT driver with adjustable constant current. It is supplied complete with a cable for connection to the luminaire.
Dimming range from 1 to 100%.
No flicker and smooth dimming in all light conditions.
Output current adjustment ( 10 levels ) by means of micro-switches.
Support CBS , central emergency application.
Independent cable clamps ( inlet / outlet ).
Dimming range from 1 to 100%.
No flicker and smooth dimming in all light conditions.
Output current adjustment ( 10 levels ) by means of micro-switches.
Support CBS , central emergency application.
Independent cable clamps ( inlet / outlet ).
LumiCWS - DR157272
The DR157272 driver is a dimmable driver (0)1-10V with adjustable constant current. It is delivered equipped with its connection cord to the luminaire.
It allows the dimming of the luminaire and the stepless adjustment of the color temperature.
Setting the output current using NFC via an APP available free of charge for iOS and Android.
No flicker and smooth dimming regardless of brightness.
Protection against overcharging, overheating and overvoltage.
Hot wiring (load disconnection management).
It allows the dimming of the luminaire and the stepless adjustment of the color temperature.
Setting the output current using NFC via an APP available free of charge for iOS and Android.
No flicker and smooth dimming regardless of brightness.
Protection against overcharging, overheating and overvoltage.
Hot wiring (load disconnection management).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
Loop in/out on primary side; 3 X 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
Loop in/out on primary side; 3 X 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
Slim-Fit CS - DR149635
The DR149635 driver is a phase cut dimmable driver. It is delivered pre-wired with350 mm of 2-conductor cable on the primary side and a 1/2 connectorized cord for connection to the luminaire.
Dimming range from 5-15 to 100% (minimum brightness may vary depending on the performance of the dimmer used).
No flicker and smooth dimming in all light conditions.
Leading and trailing edge compatible.
Dimming range from 5-15 to 100% (minimum brightness may vary depending on the performance of the dimmer used).
No flicker and smooth dimming in all light conditions.
Leading and trailing edge compatible.
Slim-Fit CS - DR149642
The DR149642 driver is a phase cut dimmable driver. It is delivered pre-wired with350 mm of 2-conductor cable on the primary side and a 1/2 connectorized cord for connection to the luminaire.
Dimming range from 5-15 to 100% (minimum brightness may vary depending on the performance of the dimmer used).
No flicker and smooth dimming in all light conditions.
Leading and trailing edge compatible.
Dimming range from 5-15 to 100% (minimum brightness may vary depending on the performance of the dimmer used).
No flicker and smooth dimming in all light conditions.
Leading and trailing edge compatible.
Slim-Fit CS - DR149659
The DR149659 driver is a phase cut dimmable driver. It is delivered pre-wired with350 mm of 2-conductor cable on the primary side and a 1/2 connectorized cord for connection to the luminaire.
Dimming range from 5-15 to 100% (minimum brightness may vary depending on the performance of the dimmer used).
No flicker and smooth dimming in all light conditions.
Leading and trailing edge compatible.
Dimming range from 5-15 to 100% (minimum brightness may vary depending on the performance of the dimmer used).
No flicker and smooth dimming in all light conditions.
Leading and trailing edge compatible.