Deutsch
Français
PRODUCTS
There are 23 products.
Active filters
Slim-Fit CS - DR149666
The DR149666 driver is a phase cut dimmable driver. It is delivered pre -wired with350 mm of 2-conductor cable on the primary side and a 1/2 connectorized cord for connection to the luminaire.
Dimming range from 5-15 to 100% (minimum brightness may vary depending on the performance of the dimmer used).
No flicker and smooth dimming in all light conditions.
Leading and trailing edge compatible.
Dimming range from 5-15 to 100% (minimum brightness may vary depending on the performance of the dimmer used).
No flicker and smooth dimming in all light conditions.
Leading and trailing edge compatible.
Slim-Fit CS - DR149659
The DR149659 driver is a phase cut dimmable driver. It is delivered pre -wired with350 mm of 2-conductor cable on the primary side and a 1/2 connectorized cord for connection to the luminaire.
Dimming range from 5-15 to 100% (minimum brightness may vary depending on the performance of the dimmer used).
No flicker and smooth dimming in all light conditions.
Leading and trailing edge compatible.
Dimming range from 5-15 to 100% (minimum brightness may vary depending on the performance of the dimmer used).
No flicker and smooth dimming in all light conditions.
Leading and trailing edge compatible.
Slim-Fit CS - DR149642
The DR149642 driver is a phase cut dimmable driver. It is delivered pre -wired with350 mm of 2-conductor cable on the primary side and a 1/2 connectorized cord for connection to the luminaire.
Dimming range from 5-15 to 100% (minimum brightness may vary depending on the performance of the dimmer used).
No flicker and smooth dimming in all light conditions.
Leading and trailing edge compatible.
Dimming range from 5-15 to 100% (minimum brightness may vary depending on the performance of the dimmer used).
No flicker and smooth dimming in all light conditions.
Leading and trailing edge compatible.
Slim-Fit CS - DR149635
The DR149635 driver is a phase cut dimmable driver. It is delivered pre -wired with350 mm of 2-conductor cable on the primary side and a 1/2 connectorized cord for connection to the luminaire.
Dimming range from 5-15 to 100% (minimum brightness may vary depending on the performance of the dimmer used).
No flicker and smooth dimming in all light conditions.
Leading and trailing edge compatible.
Dimming range from 5-15 to 100% (minimum brightness may vary depending on the performance of the dimmer used).
No flicker and smooth dimming in all light conditions.
Leading and trailing edge compatible.
ORBITAL CSR - BH156770
Emergency Pack 2.5W Constant Wattage Selftest for OrbitalCSR™ BH150143 & BH150341
ONExLITE - DL159887
Colour & Wattage Switchable Convertible Triac dimmable LED Downlight.
Convertible IP65 Bezel design enables transformation from adjustable into fixed design for maximum versatility. Supplied without Bezel.
Rapid tool-free installation through loop in / loop out push-fit wiring terminals with strain relief.
Compact integrated low profile design with insulation cover allow for use in shallow voids up to 50mm. Downlight and driver are insulation coverable.
Convertible IP65 Bezel design enables transformation from adjustable into fixed design for maximum versatility. Supplied without Bezel.
Rapid tool-free installation through loop in / loop out push-fit wiring terminals with strain relief.
Compact integrated low profile design with insulation cover allow for use in shallow voids up to 50mm. Downlight and driver are insulation coverable.
LumiCWS - DR157265
The DR157265 driver is a dimmable tunable white DALI-2 (DT8), PushDIM and PushCCT driver with adjustable constant current. It is supplied complete with a cable for connection to the luminaire.
Dimming range from 1 to 100%.
No flicker and smooth dimming in all light conditions.
Output current adjustment ( 10 levels ) by means of micro-switches.
Support CBS , central emergency application.
Independent cable clamps ( inlet / outlet ).
Dimming range from 1 to 100%.
No flicker and smooth dimming in all light conditions.
Output current adjustment ( 10 levels ) by means of micro-switches.
Support CBS , central emergency application.
Independent cable clamps ( inlet / outlet ).
IsoPro - DL150068
IP65 GU10 Fire Rated Downlight including GU10 lamp and Fixed Aluminium Bezel. Designed to seal ceilings completely.
Rapid installation through loop in/loop out push-fit wiring terminals with strain relief.
Fully insulation coverable (blown or unwound) without the need of additional accessory or insulation cut-out. Vapour-barrier compatible.
ISOPRO Kit includes the GU10 ICE lamp with superior thermal management which has been specifically designed and tested in closed fire rated and insulation covered downlights Tested in 30, 60 and 90 minutes fire-rated ceilings according to EN1365-2.
Airtight and Acoustics rated.
Rapid installation through loop in/loop out push-fit wiring terminals with strain relief.
Fully insulation coverable (blown or unwound) without the need of additional accessory or insulation cut-out. Vapour-barrier compatible.
ISOPRO Kit includes the GU10 ICE lamp with superior thermal management which has been specifically designed and tested in closed fire rated and insulation covered downlights Tested in 30, 60 and 90 minutes fire-rated ceilings according to EN1365-2.
Airtight and Acoustics rated.
IsoPro - DL150020
IP65 GU10 Fire Rated Downlight including GU10 lamp and Fixed Aluminium Bezel. Designed to seal ceilings completely.
Rapid installation through loop in/loop out push-fit wiring terminals with strain relief.
Fully insulation coverable (blown or unwound) without the need of additional accessory or insulation cut-out. Vapour-barrier compatible.
ISOPRO Kit includes the GU10 ICE lamp with superior thermal management which has been specifically designed and tested in closed fire rated and insulation covered downlights Tested in 30, 60 and 90 minutes fire-rated ceilings according to EN1365-2.
Airtight and Acoustics rated.
Rapid installation through loop in/loop out push-fit wiring terminals with strain relief.
Fully insulation coverable (blown or unwound) without the need of additional accessory or insulation cut-out. Vapour-barrier compatible.
ISOPRO Kit includes the GU10 ICE lamp with superior thermal management which has been specifically designed and tested in closed fire rated and insulation covered downlights Tested in 30, 60 and 90 minutes fire-rated ceilings according to EN1365-2.
Airtight and Acoustics rated.
