Corridors
There are 76 products.
Active filters
WAIZ CS - OD149925
Colour Switchable Aluminium low level floor washer with frosted diffuser.
Colour Switchable between 2700/3000/4000K prior to installation.
Suitable for use with slim 5mm Square bezel in Black and White.
Designed for 40mm depth flush mount boxes.
Colour Switchable between 2700/3000/4000K prior to installation.
Suitable for use with slim 5mm Square bezel in Black and White.
Designed for 40mm depth flush mount boxes.
TROFFER CWS - LP154288
Colour & Wattage Switchable high-efficiency (120Im/W) LED TrofferPanel uses edge -lit technology to replicate the appearance of traditional direct/indirect luminaires.
Microprismatic diffuser (UGR<19) significantly reduces glare and enhances visual comfort which makes the Troffer Panel ideal for a wide range of commercial applications, including schools and offices.
Flicker-free non-dimmable LED driver pre -wired for simplified and fast through-wiring installation. Safety cable according to EN60598 included.
2 Wattage and 2 Colour Selections available for ultimate flexibility in every application.
Microprismatic diffuser (UGR<19) significantly reduces glare and enhances visual comfort which makes the Troffer Panel ideal for a wide range of commercial applications, including schools and offices.
Flicker-free non-dimmable LED driver pre -wired for simplified and fast through-wiring installation. Safety cable according to EN60598 included.
2 Wattage and 2 Colour Selections available for ultimate flexibility in every application.
SPHERAL CWS - BH150457
Colour & Wattage Switchable IP65 Bulkhead with opal polycarbonate IK10 diffuser for even and uniform light distribution. Integrated Microwave Sensor for enhanced energy saving.
3 Wattage and 3 Colour Selections available for ultimate flexibility in every application.
IP65 rated rear and side entry access wiring compartment enable quick and simple through-wiring and product installation.
Microwave Sensor version with daylight harvesting feature, 110° detection range up to 4 meter and adjustable hold time configurations from 5 seconds to 30 minutes available.
UV resistant and suitable for installations in unprotected outdoor areas with ambient temperatures from -25°C to +45°C.
3 Wattage and 3 Colour Selections available for ultimate flexibility in every application.
IP65 rated rear and side entry access wiring compartment enable quick and simple through-wiring and product installation.
Microwave Sensor version with daylight harvesting feature, 110° detection range up to 4 meter and adjustable hold time configurations from 5 seconds to 30 minutes available.
UV resistant and suitable for installations in unprotected outdoor areas with ambient temperatures from -25°C to +45°C.
SPHERAL CWS - BH150440
Colour & Wattage Switchable IP65 Bulkhead with opal polycarbonate IK10 diffuser for even and uniform light distribution. Integrated Microwave Sensor for enhanced energy saving.
3 Wattage and 3 Colour Selections available for ultimate flexibility in every application.
IP65 rated rear and side entry access wiring compartment enable quick and simple through-wiring and product installation.
Microwave Sensor version with daylight harvesting feature, 110° detection range up to 4 meter and adjustable hold time configurations from 5 seconds to 30 minutes available.
UV resistant and suitable for installations in unprotected outdoor areas with ambient temperatures from -25°C to +45°C.
3 Wattage and 3 Colour Selections available for ultimate flexibility in every application.
IP65 rated rear and side entry access wiring compartment enable quick and simple through-wiring and product installation.
Microwave Sensor version with daylight harvesting feature, 110° detection range up to 4 meter and adjustable hold time configurations from 5 seconds to 30 minutes available.
UV resistant and suitable for installations in unprotected outdoor areas with ambient temperatures from -25°C to +45°C.
SPHERAL - BH150433
IP65 18W Bulkhead with opal polycarbonate IK10 diffuser for even and uniform light distribution offer best value for money.
IP65 rated rear and side entry access wiring compartment enable quick and simple through-wiring and product installation.
Microwave Sensor version with daylight harvesting feature, 110° detection range up to 4 meter and adjustable hold time configurations from 5 seconds to 30 minutes available.
UV resistant and suitable for installations in unprotected outdoor areas with ambient temperatures from -25°C to +45°C.
IP65 rated rear and side entry access wiring compartment enable quick and simple through-wiring and product installation.
Microwave Sensor version with daylight harvesting feature, 110° detection range up to 4 meter and adjustable hold time configurations from 5 seconds to 30 minutes available.
UV resistant and suitable for installations in unprotected outdoor areas with ambient temperatures from -25°C to +45°C.
SPHERAL - BH150426
IP65 18W Bulkhead with opal polycarbonate IK10 diffuser for even and uniform light distribution offer best value for money.
IP65 rated rear and side entry access wiring compartment enable quick and simple through-wiring and product installation.
Microwave Sensor version with daylight harvesting feature, 110° detection range up to 4 meter and adjustable hold time configurations from 5 seconds to 30 minutes available.
UV resistant and suitable for installations in unprotected outdoor areas with ambient temperatures from -25°C to +45°C.
IP65 rated rear and side entry access wiring compartment enable quick and simple through-wiring and product installation.
Microwave Sensor version with daylight harvesting feature, 110° detection range up to 4 meter and adjustable hold time configurations from 5 seconds to 30 minutes available.
UV resistant and suitable for installations in unprotected outdoor areas with ambient temperatures from -25°C to +45°C.
Slim-Fit CS - DR149666
The DR149666 driver is a phase cut dimmable driver. It is delivered pre -wired with350 mm of 2-conductor cable on the primary side and a 1/2 connectorized cord for connection to the luminaire.
Dimming range from 5-15 to 100% (minimum brightness may vary depending on the performance of the dimmer used).
No flicker and smooth dimming in all light conditions.
Leading and trailing edge compatible.
Dimming range from 5-15 to 100% (minimum brightness may vary depending on the performance of the dimmer used).
No flicker and smooth dimming in all light conditions.
Leading and trailing edge compatible.
Slim-Fit CS - DR149659
The DR149659 driver is a phase cut dimmable driver. It is delivered pre -wired with350 mm of 2-conductor cable on the primary side and a 1/2 connectorized cord for connection to the luminaire.
Dimming range from 5-15 to 100% (minimum brightness may vary depending on the performance of the dimmer used).
No flicker and smooth dimming in all light conditions.
Leading and trailing edge compatible.
Dimming range from 5-15 to 100% (minimum brightness may vary depending on the performance of the dimmer used).
No flicker and smooth dimming in all light conditions.
Leading and trailing edge compatible.
Slim-Fit CS - DR149642
The DR149642 driver is a phase cut dimmable driver. It is delivered pre -wired with350 mm of 2-conductor cable on the primary side and a 1/2 connectorized cord for connection to the luminaire.
Dimming range from 5-15 to 100% (minimum brightness may vary depending on the performance of the dimmer used).
No flicker and smooth dimming in all light conditions.
Leading and trailing edge compatible.
Dimming range from 5-15 to 100% (minimum brightness may vary depending on the performance of the dimmer used).
No flicker and smooth dimming in all light conditions.
Leading and trailing edge compatible.
Slim-Fit CS - DR149635
The DR149635 driver is a phase cut dimmable driver. It is delivered pre -wired with350 mm of 2-conductor cable on the primary side and a 1/2 connectorized cord for connection to the luminaire.
Dimming range from 5-15 to 100% (minimum brightness may vary depending on the performance of the dimmer used).
No flicker and smooth dimming in all light conditions.
Leading and trailing edge compatible.
Dimming range from 5-15 to 100% (minimum brightness may vary depending on the performance of the dimmer used).
No flicker and smooth dimming in all light conditions.
Leading and trailing edge compatible.
Slim-Fit CS - DL150273
Colour Switchable super-slim Aluminium edge -lite low profile LED Downlights are ideal for installations in limited recess space (23mm including driver).
Wide product range covers most common cut-out dimensions of traditional light sources and delivers enhanced energy savings.
PMMA light guide with PC diffusor for low glare even light distribution.
Supplied with remote non-dimmable constant current driver and 150mm cable for ease of installation.
Dimmable driver options as accessory.
Wide product range covers most common cut-out dimensions of traditional light sources and delivers enhanced energy savings.
PMMA light guide with PC diffusor for low glare even light distribution.
Supplied with remote non-dimmable constant current driver and 150mm cable for ease of installation.
Dimmable driver options as accessory.
Slim-Fit CS - DL150266
Colour Switchable super-slim Aluminium edge -lite low profile LED Downlights are ideal for installations in limited recess space (23mm including driver).
Wide product range covers most common cut-out dimensions of traditional light sources and delivers enhanced energy savings.
PMMA light guide with PC diffusor for low glare even light distribution.
Supplied with remote non-dimmable constant current driver and 150mm cable for ease of installation.
Dimmable driver options as accessory.
Wide product range covers most common cut-out dimensions of traditional light sources and delivers enhanced energy savings.
PMMA light guide with PC diffusor for low glare even light distribution.
Supplied with remote non-dimmable constant current driver and 150mm cable for ease of installation.
Dimmable driver options as accessory.
Slim-Fit CS - DL150259
Colour Switchable super-slim Aluminium edge -lite low profile LED Downlights are ideal for installations in limited recess space (23mm including driver).
Wide product range covers most common cut-out dimensions of traditional light sources and delivers enhanced energy savings.
PMMA light guide with PC diffusor for low glare even light distribution.
Supplied with remote non-dimmable constant current driver and 150mm cable for ease of installation.
Dimmable driver options as accessory.
Wide product range covers most common cut-out dimensions of traditional light sources and delivers enhanced energy savings.
PMMA light guide with PC diffusor for low glare even light distribution.
Supplied with remote non-dimmable constant current driver and 150mm cable for ease of installation.
Dimmable driver options as accessory.
Slim-Fit CS - DL150242
Colour Switchable super-slim Aluminium edge -lite low profile LED Downlights are ideal for installations in limited recess space (23mm including driver).
Wide product range covers most common cut-out dimensions of traditional light sources and delivers enhanced energy savings.
PMMA light guide with PC diffusor for low glare even light distribution.
Supplied with remote non-dimmable constant current driver and 150mm cable for ease of installation.
Dimmable driver options as accessory.
Wide product range covers most common cut-out dimensions of traditional light sources and delivers enhanced energy savings.
PMMA light guide with PC diffusor for low glare even light distribution.
Supplied with remote non-dimmable constant current driver and 150mm cable for ease of installation.
Dimmable driver options as accessory.
Slim-Fit CS - DL150235
Colour Switchable super-slim Aluminium edge -lite low profile LED Downlights are ideal for installations in limited recess space (23mm including driver).
Wide product range covers most common cut-out dimensions of traditional light sources and delivers enhanced energy savings.
PMMA light guide with PC diffusor for low glare even light distribution.
Supplied with remote non-dimmable constant current driver and 150mm cable for ease of installation.
Dimmable driver options as accessory.
Wide product range covers most common cut-out dimensions of traditional light sources and delivers enhanced energy savings.
PMMA light guide with PC diffusor for low glare even light distribution.
Supplied with remote non-dimmable constant current driver and 150mm cable for ease of installation.
Dimmable driver options as accessory.
PavoCWS PRO - DL151966
Colour & Wattage Switchable Aluminium LED Downlight for surface or recessed installations with adjustable cut-out.
3 Wattage and 3 Colour Selections available for ultimate flexibility in every application and perfect retrofit solution for renovations.
One size fit all bracket for adjustable cut-out between 65-205mm enables flexible recessed or surface mount installation.
Integrated non dimmable led driver for very low profile installation height of only 16mm.
Supplied with 300mm pre -wired cable for quick installation.
3 Wattage and 3 Colour Selections available for ultimate flexibility in every application and perfect retrofit solution for renovations.
One size fit all bracket for adjustable cut-out between 65-205mm enables flexible recessed or surface mount installation.
Integrated non dimmable led driver for very low profile installation height of only 16mm.
Supplied with 300mm pre -wired cable for quick installation.
PavoCWS - DL151140
Colour & Wattage Switchable Polycarbonate LED Downlight for surface or recessed installations with adjustable cut-out.
3 Wattage and 3 Colour Selections available for ultimate flexibility in every application and perfect retrofit solution for renovations.
One size fit all bracket for adjustable cut-out between 65-180mm (DL149529 & DL151133) or 65-240mm (DL150389 & DL151140) enables flexible recessed or surface mount installation.
Integrated non dimmable led driver for very low profile installation height of only 17mm.
Magnetic design allows customization of white standard version with magnetic Black and Satin Nickel bezels.
3 Wattage and 3 Colour Selections available for ultimate flexibility in every application and perfect retrofit solution for renovations.
One size fit all bracket for adjustable cut-out between 65-180mm (DL149529 & DL151133) or 65-240mm (DL150389 & DL151140) enables flexible recessed or surface mount installation.
Integrated non dimmable led driver for very low profile installation height of only 17mm.
Magnetic design allows customization of white standard version with magnetic Black and Satin Nickel bezels.
