Deutsch
Français
APPLICATIONS
There are 154 products.
LED DRIVER - DR154622
Dimmable Phase Cut ( TRIAC) Constant Voltage (CV) LED driver.
SELV type with Short circuit, Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit, Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
LED DRIVER - DR154615
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit, Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit, Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
LED DRIVER - DR154585
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit, Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit, Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
LED DRIVER - DR152840
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit, Overload and Over voltage protection.
Loop in/out on primary side, 3 X 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit, Overload and Over voltage protection.
Loop in/out on primary side, 3 X 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
KLAY - DC155162
High quality die -cast aluminium multi-directional IP65 decorative wall lights. Twin Type product.
Direct and Indirect lighting through adjustable reflectors. Simple adjustments can be made from the top or bottom of the product.
Supplied with integrated non dimmable led driver for ease of installation.
Aluminium die -cast finish in Black.
Direct and Indirect lighting through adjustable reflectors. Simple adjustments can be made from the top or bottom of the product.
Supplied with integrated non dimmable led driver for ease of installation.
Aluminium die -cast finish in Black.
KLAY - DC155155
High quality die -cast aluminium multi-directional IP65 decorative wall lights. Twin Type product.
Direct and Indirect lighting through adjustable reflectors. Simple adjustments can be made from the top or bottom of the product.
Supplied with integrated non dimmable led driver for ease of installation.
Aluminium die -cast finish in Black.
Direct and Indirect lighting through adjustable reflectors. Simple adjustments can be made from the top or bottom of the product.
Supplied with integrated non dimmable led driver for ease of installation.
Aluminium die -cast finish in Black.
KLAY - DC155148
High quality die -cast aluminium multi-directional IP65 decorative wall lights. Single Type product.
Direct and Indirect lighting through adjustable reflectors. Simple adjustments can be made from the top or bottom of the product.
Supplied with integrated non dimmable led driver for ease of installation.
Aluminium die -cast finish in Black.
Direct and Indirect lighting through adjustable reflectors. Simple adjustments can be made from the top or bottom of the product.
Supplied with integrated non dimmable led driver for ease of installation.
Aluminium die -cast finish in Black.
KLAY - DC155131
High quality die -cast aluminium multi-directional IP65 decorative wall lights. Single Type product.
Direct and Indirect lighting through adjustable reflectors. Simple adjustments can be made from the top or bottom of the product.
Supplied with integrated non dimmable led driver for ease of installation.
Aluminium die -cast finish in Black.
Direct and Indirect lighting through adjustable reflectors. Simple adjustments can be made from the top or bottom of the product.
Supplied with integrated non dimmable led driver for ease of installation.
Aluminium die -cast finish in Black.
HYDROLINK - AC167639
Wattage Selectable corrosion-resistant linear equipped with an opal UV-resistant polycarbonate diffuser, IK08 rated for high impact resistance offers best value for money.
IP65 rated cable glands on both ends with integrated 3pol terminal block enable quick and simple through-wiring and product installation.
Available with 2 wattage selection options as perfect retrofit solution for single and twin corrosion-resistant T8 fluorescent fittings.
IK08 polycarbonate diffuser and housing vandal-proof.
UV resistant and suitable for installations in unprotected outdoor areas with ambient temperatures from –20 °C to +45 °C.
IP65 rated cable glands on both ends with integrated 3pol terminal block enable quick and simple through-wiring and product installation.
Available with 2 wattage selection options as perfect retrofit solution for single and twin corrosion-resistant T8 fluorescent fittings.
IK08 polycarbonate diffuser and housing vandal-proof.
UV resistant and suitable for installations in unprotected outdoor areas with ambient temperatures from –20 °C to +45 °C.
HYDROLINK - AC167622
Wattage Selectable corrosion-resistant linear equipped with an opal UV-resistant polycarbonate diffuser, IK08 rated for high impact resistance offers best value for money.
IP65 rated cable glands on both ends with integrated 3pol terminal block enable quick and simple through-wiring and product installation.
Available with 2 wattage selection options as perfect retrofit solution for single and twin corrosion-resistant T8 fluorescent fittings.
IK08 polycarbonate diffuser and housing vandal-proof.
UV resistant and suitable for installations in unprotected outdoor areas with ambient temperatures from –20 °C to +45 °C.
IP65 rated cable glands on both ends with integrated 3pol terminal block enable quick and simple through-wiring and product installation.
Available with 2 wattage selection options as perfect retrofit solution for single and twin corrosion-resistant T8 fluorescent fittings.
IK08 polycarbonate diffuser and housing vandal-proof.
UV resistant and suitable for installations in unprotected outdoor areas with ambient temperatures from –20 °C to +45 °C.
G-LITE PRO - OD154745
IP67 GU10 Recessed Ground Light as the perfect choice for residential outdoor environments.
Corrosion-resistant body with 304 stainless steel bezel, A4 stainless steel screws and clear tempered glass diffuser (2.500kg load) with salt-spray protection.
Supplied with integrated GU10 socket and two waterproof cable glands for safe and secure through-wiring in outdoor applications.
Designed for ambient temperatures from –30 °C to +45 °C.
Corrosion-resistant body with 304 stainless steel bezel, A4 stainless steel screws and clear tempered glass diffuser (2.500kg load) with salt-spray protection.
Supplied with integrated GU10 socket and two waterproof cable glands for safe and secure through-wiring in outdoor applications.
Designed for ambient temperatures from –30 °C to +45 °C.
G-LITE - OD155308
IP65 GU10 Recessed Ground Light as the perfect choice for residential outdoor environments.
Corrosion-resistant body with 304 stainless steel bezel, A4 stainless steel screws and clear tempered glass diffuser (2.500kg load) with salt-spray protection.
Fourni avec une douille GU10 intégrée et un câble en caoutchouc pré-câblé de 1 m pour une installation sûre et sécurisée dans les applications extérieures.
Designed for ambient temperatures from –30 °C to +45 °C.
Corrosion-resistant body with 304 stainless steel bezel, A4 stainless steel screws and clear tempered glass diffuser (2.500kg load) with salt-spray protection.
Fourni avec une douille GU10 intégrée et un câble en caoutchouc pré-câblé de 1 m pour une installation sûre et sécurisée dans les applications extérieures.
Designed for ambient temperatures from –30 °C to +45 °C.
FILO - DL165529
Decorative pendant luminaire with sneak designed high quality die -cast aluminium body.
COB version supplied with 24° aluminium reflector. Other beam angles available upon request.
Built-in Triac dimmable flicker free driver .
Supplied with Canopy mounting box including 3pol terminal box for rapid installation.
Supplied with 1080mm adjustable textile suspension cable.
COB version supplied with 24° aluminium reflector. Other beam angles available upon request.
Built-in Triac dimmable flicker free driver .
Supplied with Canopy mounting box including 3pol terminal box for rapid installation.
Supplied with 1080mm adjustable textile suspension cable.
FaloCS - DL149581
Colour Switchable IP44 Adjustable LED Downlight (120lm/W) with integrated Triac Dimmable LED driver. Coverable with any type of insulation material and airtight tested.
Rapid tool-free installation through loop in/loop out push-fit wiring terminals with strain relief.
Compact integrated low profile design with insulation cover allow for use in shallow voids up to 50mm.
Colour Switchable between 2700/3000/4000K.
LEDchroic lens design with 60° beam angle imitates the appearance of halogen lamps and provides controlled, uniform light distribution with minimal glare.
Rapid tool-free installation through loop in/loop out push-fit wiring terminals with strain relief.
Compact integrated low profile design with insulation cover allow for use in shallow voids up to 50mm.
Colour Switchable between 2700/3000/4000K.
LEDchroic lens design with 60° beam angle imitates the appearance of halogen lamps and provides controlled, uniform light distribution with minimal glare.
EXCELL WS™ - CL164003
Wattage Switchable In-Track Panel engineered for use with existing 3-circuit track systems, offering ultimate flexibility for retail and commercial environments.
Slim-profile in-track adapter with integrated phase -change feature and wattage dip switch. Pull-down mechanism allows flexible rotation of 350°.
Innovative optical lens pattern delivers market-leading efficiency of up to 180 lm/W. Standard options include a 90° beam and double -asymmetric lens design with DS25° × 60° × DS25°.
Customization options available in black or silver finish, wide range of beam angles, colour temperatures and food-specific CCT rendering.
Slim-profile in-track adapter with integrated phase -change feature and wattage dip switch. Pull-down mechanism allows flexible rotation of 350°.
Innovative optical lens pattern delivers market-leading efficiency of up to 180 lm/W. Standard options include a 90° beam and double -asymmetric lens design with DS25° × 60° × DS25°.
Customization options available in black or silver finish, wide range of beam angles, colour temperatures and food-specific CCT rendering.
EXCELL WS™ - CL163990
Wattage Switchable In-Track Panel engineered for use with existing 3-circuit track systems, offering ultimate flexibility for retail and commercial environments.
Slim-profile in-track adapter with integrated phase -change feature and wattage dip switch. Pull-down mechanism allows flexible rotation of 350°.
Innovative optical lens pattern delivers market-leading efficiency of up to 180 lm/W. Standard options include a 90° beam and double -asymmetric lens design with DS25° × 60° × DS25°.
Customization options available in black or silver finish, wide range of beam angles, colour temperatures and food-specific CCT rendering.
Slim-profile in-track adapter with integrated phase -change feature and wattage dip switch. Pull-down mechanism allows flexible rotation of 350°.
Innovative optical lens pattern delivers market-leading efficiency of up to 180 lm/W. Standard options include a 90° beam and double -asymmetric lens design with DS25° × 60° × DS25°.
Customization options available in black or silver finish, wide range of beam angles, colour temperatures and food-specific CCT rendering.
EASY RE-FIT WS - CL164386
Wattage Switchable efficient and flexible light-in-light retrofit solution designed to replace safe and reliable existing T5/T8 fluorescent tube installations.
Pre -wired and tool-free magnetic mounting to any ferromagnetic surface via integrated magnets — ideal for hassle -free T5/T8 refurbishment projects where full luminaire replacement is not feasible.
Isolated system supplied with pre -wired plug & play DC connector cable for rapid connection to the power supply or fast system extension.
Glare -free frosted polycarbonate cover with wide 130° beam angle ensures comfortable and uniform light distribution.
Wattage Switchable driver with nickel-plated magnetic base, pre -wired to a 4-way distribution box for quick and effortless installation within existing luminaire housings required - available as accessory.
Pre -wired and tool-free magnetic mounting to any ferromagnetic surface via integrated magnets — ideal for hassle -free T5/T8 refurbishment projects where full luminaire replacement is not feasible.
Isolated system supplied with pre -wired plug & play DC connector cable for rapid connection to the power supply or fast system extension.
Glare -free frosted polycarbonate cover with wide 130° beam angle ensures comfortable and uniform light distribution.
Wattage Switchable driver with nickel-plated magnetic base, pre -wired to a 4-way distribution box for quick and effortless installation within existing luminaire housings required - available as accessory.
EASY RE-FIT WS - CL164379
Wattage Switchable efficient and flexible light-in-light retrofit solution designed to replace safe and reliable existing T5/T8 fluorescent tube installations.
Pre -wired and tool-free magnetic mounting to any ferromagnetic surface via integrated magnets — ideal for hassle -free T5/T8 refurbishment projects where full luminaire replacement is not feasible.
Isolated system supplied with pre -wired plug & play DC connector cable for rapid connection to the power supply or fast system extension.
Glare -free frosted polycarbonate cover with wide 130° beam angle ensures comfortable and uniform light distribution.
Wattage Switchable driver with nickel-plated magnetic base, pre -wired to a 4-way distribution box for quick and effortless installation within existing luminaire housings.
Pre -wired and tool-free magnetic mounting to any ferromagnetic surface via integrated magnets — ideal for hassle -free T5/T8 refurbishment projects where full luminaire replacement is not feasible.
Isolated system supplied with pre -wired plug & play DC connector cable for rapid connection to the power supply or fast system extension.
Glare -free frosted polycarbonate cover with wide 130° beam angle ensures comfortable and uniform light distribution.
Wattage Switchable driver with nickel-plated magnetic base, pre -wired to a 4-way distribution box for quick and effortless installation within existing luminaire housings.
EASY RE-FIT WS - CL164355
Wattage Switchable efficient and flexible light-in-light retrofit solution designed to replace safe and reliable existing T5/T8 fluorescent tube installations.
Pre -wired and tool-free magnetic mounting to any ferromagnetic surface via integrated magnets — ideal for hassle -free T5/T8 refurbishment projects where full luminaire replacement is not feasible.
Isolated system supplied with pre -wired plug & play DC connector cable for rapid connection to the power supply or fast system extension.
Glare -free frosted polycarbonate cover with wide 130° beam angle ensures comfortable and uniform light distribution.
Wattage Switchable driver with nickel-plated magnetic base, pre -wired to a 4-way distribution box for quick and effortless installation within existing luminaire housings required - available as accessory.
Pre -wired and tool-free magnetic mounting to any ferromagnetic surface via integrated magnets — ideal for hassle -free T5/T8 refurbishment projects where full luminaire replacement is not feasible.
Isolated system supplied with pre -wired plug & play DC connector cable for rapid connection to the power supply or fast system extension.
Glare -free frosted polycarbonate cover with wide 130° beam angle ensures comfortable and uniform light distribution.
Wattage Switchable driver with nickel-plated magnetic base, pre -wired to a 4-way distribution box for quick and effortless installation within existing luminaire housings required - available as accessory.