The DR149666 driver is a phase cut dimmable driver. It is delivered pre -wired with350 mm of 2-conductor cable on the primary side and a 1/2 connectorized cord for connection to the luminaire. Dimming range from 5-15 to 100% (minimum brightness may vary depending on the performance of the dimmer used). No flicker and smooth dimming in all light conditions. Leading and trailing edge compatible.
The DR149659 driver is a phase cut dimmable driver. It is delivered pre -wired with350 mm of 2-conductor cable on the primary side and a 1/2 connectorized cord for connection to the luminaire. Dimming range from 5-15 to 100% (minimum brightness may vary depending on the performance of the dimmer used). No flicker and smooth dimming in all light conditions. Leading and trailing edge compatible.
The DR149642 driver is a phase cut dimmable driver. It is delivered pre -wired with350 mm of 2-conductor cable on the primary side and a 1/2 connectorized cord for connection to the luminaire. Dimming range from 5-15 to 100% (minimum brightness may vary depending on the performance of the dimmer used). No flicker and smooth dimming in all light conditions. Leading and trailing edge compatible.
The DR149635 driver is a phase cut dimmable driver. It is delivered pre -wired with350 mm of 2-conductor cable on the primary side and a 1/2 connectorized cord for connection to the luminaire. Dimming range from 5-15 to 100% (minimum brightness may vary depending on the performance of the dimmer used). No flicker and smooth dimming in all light conditions. Leading and trailing edge compatible.
IP65 GU10 Fire Rated Downlight including GU10 3CCT lamp and Fixed Aluminium Bezel. Designed to seal ceilings completely. Rapid installation through loop in/loop out push-fit wiring terminals with strain relief. Fully insulation coverable (blown or unwound) without the need of additional accessory or insulation cut-out. Vapour-barrier compatible. ISOPRO Kit includes the GU10 ICE lamp with superior thermal management which has been specifically designed and tested in closed fire rated and insulation covered downlights Tested in 30, 60 and 90 minutes fire -rated ceilings according to EN1365-2. Airtight and Acoustics rated.
IP65/IP50 GU10 Universal Downlight including GU10 socket and lamp and Fixed Aluminium Bezel in White. Designed to seal ceilings completely. Rapid installation through loop in/loop out push-fit wiring terminals with strain relief. Fully insulation coverable (blown or unwound) without the need of additional accessory or insulation cut-out. Vapour-barrier compatible. ISOPRO Kit includes the GU10 ICE lamp with superior thermal management which has been specifically designed and tested in fully enclosed insulation coverable downlights. Airtight and Acoustics rated.
Colour & Wattage Switchable Aluminium LED Downlight for surface or recessed installations with adjustable cut-out. 3 Wattage and 3 Colour Selections available for ultimate flexibility in every application and perfect retrofit solution for renovations. One size fit all bracket for adjustable cut-out between 65-205mm enables flexible recessed or surface mount installation. Integrated non dimmable led driver for very low profile installation height of only 16mm. Supplied with 300mm pre -wired cable for quick installation.
Colour & Wattage Switchable Baffled Triac dimmable LED Fire Rated LED Downlight. IP65 sleek baffled design to reduce glare. Supplied with White Aluminium Bezel. Black and Satin Nickel options available. Rapid tool-free installation through loop in / loop out push-fit wiring terminals with strain relief. Compact integrated design with insulation cover allow for use in shallow voids up to 73mm. Downlight and driver are insulation coverable. Tested in 30 and 60 minutes fire -rated ceilings according to EN1365-2.
Colour & Wattage Selectable IP54 Impact-Resistant Commercial Surface -Mount Luminaire as perfect solution for new commercial applications or upgrading from compact fluorescent fittings in existing environments. Rear wiring compartment with push-fit terminals for quick, tool-free through-wiring. 3 Wattage and 2 Colour Selections available for ultimate flexibility in every application and perfect retrofit solution for renovations. Microwave sensor version with daylight harvesting: 110° detection angle, range up to 4 m, and adjustable hold time from 5 seconds to 10 minutes. IP54 & IK08 rated impact-resistant polycarbonate housing. Suitable for ambient temperatures from –20 °C to +40 °C.
Colour & Wattage Selectable IP54 Impact-Resistant Commercial Surface -Mount Luminaire as perfect solution for new commercial applications or upgrading from compact fluorescent fittings in existing environments. Rear wiring compartment with push-fit terminals for quick, tool-free through-wiring. 3 Wattage and 2 Colour Selections available for ultimate flexibility in every application and perfect retrofit solution for renovations. IP54 & IK08 rated impact-resistant polycarbonate housing. Suitable for ambient temperatures from –20 °C to +40 °C.
Colour & Wattage Selectable IP54 Impact-Resistant Commercial Surface -Mount Luminaire as perfect solution for new commercial applications or upgrading from compact fluorescent fittings in existing environments. Rear wiring compartment with push-fit terminals for quick, tool-free through-wiring. 3 Wattage and 2 Colour Selections available for ultimate flexibility in every application and perfect retrofit solution for renovations. Microwave sensor version with daylight harvesting: 110° detection angle, range up to 4 m, and adjustable hold time from 5 seconds to 10 minutes. IP54 & IK08 rated impact-resistant polycarbonate housing. Suitable for ambient temperatures from –20 °C to +40 °C.
Colour & Wattage Selectable IP54 Impact-Resistant Commercial Surface -Mount Luminaire as perfect solution for new commercial applications or upgrading from compact fluorescent fittings in existing environments. Rear wiring compartment with push-fit terminals for quick, tool-free through-wiring. 3 Wattage and 2 Colour Selections available for ultimate flexibility in every application and perfect retrofit solution for renovations. IP54 & IK08 rated impact-resistant polycarbonate housing. Suitable for ambient temperatures from –20 °C to +40 °C.
Colour & Wattage Selectable IP54 Impact-Resistant Commercial Surface -Mount Luminaire as perfect solution for new commercial applications or upgrading from compact fluorescent fittings in existing environments. Rear wiring compartment with push-fit terminals for quick, tool-free through-wiring. 3 Wattage and 2 Colour Selections available for ultimate flexibility in every application and perfect retrofit solution for renovations. Microwave sensor version with daylight harvesting: 110° detection angle, range up to 4 m, and adjustable hold time from 5 seconds to 10 minutes. IP54 & IK08 rated impact-resistant polycarbonate housing. Suitable for ambient temperatures from –20 °C to +40 °C.
Colour & Wattage Switchable Polycarbonate LED Downlight for surface or recessed installations with adjustable cut-out. 3 Wattage and 3 Colour Selections available for ultimate flexibility in every application and perfect retrofit solution for renovations. One size fit all bracket for adjustable cut-out between 65-180mm (DL149529 & DL151133) or 65-240mm (DL150389 & DL151140) enables flexible recessed or surface mount installation. Integrated non dimmable led driver for very low profile installation height of only 17mm. Magnetic design allows customization of white standard version with magnetic Black and Satin Nickel bezels.
Colour & Wattage Switchable Polycarbonate LED Downlight for surface or recessed installations with adjustable cut-out. 3 Wattage and 3 Colour Selections available for ultimate flexibility in every application and perfect retrofit solution for renovations. One size fit all bracket for adjustable cut-out between 65-180mm (DL149529 & DL151133) or 65-240mm (DL150389 & DL151140) enables flexible recessed or surface mount installation. Integrated non dimmable led driver for very low profile installation height of only 17mm. Magnetic design allows customization of white standard version with magnetic Black and Satin Nickel bezels.
Colour & Wattage Selectable IP54 Impact-Resistant Commercial Surface -Mount Luminaire as perfect solution for new commercial applications or upgrading from compact fluorescent fittings in existing environments. Rear wiring compartment with push-fit terminals for quick, tool-free through-wiring. Offers 3 wattage and 2 colour selections for ultimate flexibility and ideal retrofit use in renovation projects. IP54 & IK08 rated impact-resistant polycarbonate housing. Suitable for ambient temperatures from –20 °C to +40 °C.
Colour & Wattage Selectable IP54 die -cast aluminium high efficiency UGR19 Commercial LED Downlight range are a perfect solution for new commercial applications or upgrading from compact fluorescent fittings in existing environments. Low glare aluminium specular reflector provides excellent glare control with UGR19 and even light distribution. Supplied with slight recessed white frame. Black available as accessory. Supplied with flicker-free non-dimmable LED driver with push-fit terminal block for simplified and fast through-wiring installation. DALI and 1-10v driver options available.
Colour & Wattage Selectable IP54 die -cast aluminium high efficiency UGR19 Commercial LED Downlight range are a perfect solution for new commercial applications or upgrading from compact fluorescent fittings in existing environments. Low glare aluminium specular reflector provides excellent glare control with UGR19 and even light distribution. Supplied with slight recessed white frame. Black available as accessory. Supplied with flicker-free non-dimmable LED driver with push-fit terminal block for simplified and fast through-wiring installation. DALI and 1-10v driver options available.
This website uses cookies to ensure you get the best experience on our website
Deutsch
Français
