The DR157272 driver is a dimmable driver (0)1-10V with adjustable constant current. It is delivered equipped with its connection cord to the luminaire. It allows the dimming of the luminaire and the stepless adjustment of the color temperature. Setting the output current using NFC via an APP available free of charge for iOS and Android. No flicker and smooth dimming regardless of brightness. Protection against overcharging, overheating and overvoltage. Hot wiring (load disconnection management).
The DR157265 driver is a dimmable tunable white DALI-2 (DT8), PushDIM and PushCCT driver with adjustable constant current. It is supplied complete with a cable for connection to the luminaire. Dimming range from 1 to 100%. No flicker and smooth dimming in all light conditions. Output current adjustment ( 10 levels ) by means of micro-switches. Support CBS , central emergency application. Independent cable clamps ( inlet / outlet ).
The DR149666 driver is a phase cut dimmable driver. It is delivered pre -wired with350 mm of 2-conductor cable on the primary side and a 1/2 connectorized cord for connection to the luminaire. Dimming range from 5-15 to 100% (minimum brightness may vary depending on the performance of the dimmer used). No flicker and smooth dimming in all light conditions. Leading and trailing edge compatible.
The DR149659 driver is a phase cut dimmable driver. It is delivered pre -wired with350 mm of 2-conductor cable on the primary side and a 1/2 connectorized cord for connection to the luminaire. Dimming range from 5-15 to 100% (minimum brightness may vary depending on the performance of the dimmer used). No flicker and smooth dimming in all light conditions. Leading and trailing edge compatible.
The DR149642 driver is a phase cut dimmable driver. It is delivered pre -wired with350 mm of 2-conductor cable on the primary side and a 1/2 connectorized cord for connection to the luminaire. Dimming range from 5-15 to 100% (minimum brightness may vary depending on the performance of the dimmer used). No flicker and smooth dimming in all light conditions. Leading and trailing edge compatible.
The DR149635 driver is a phase cut dimmable driver. It is delivered pre -wired with350 mm of 2-conductor cable on the primary side and a 1/2 connectorized cord for connection to the luminaire. Dimming range from 5-15 to 100% (minimum brightness may vary depending on the performance of the dimmer used). No flicker and smooth dimming in all light conditions. Leading and trailing edge compatible.
IP65 GU10 Fire Rated Downlight including GU10 3CCT lamp and Fixed Aluminium Bezel. Designed to seal ceilings completely. Rapid installation through loop in/loop out push-fit wiring terminals with strain relief. Fully insulation coverable (blown or unwound) without the need of additional accessory or insulation cut-out. Vapour-barrier compatible. ISOPRO Kit includes the GU10 ICE lamp with superior thermal management which has been specifically designed and tested in closed fire rated and insulation covered downlights Tested in 30, 60 and 90 minutes fire -rated ceilings according to EN1365-2. Airtight and Acoustics rated.
IP65/IP50 GU10 Universal Downlight including GU10 socket and lamp and Fixed Aluminium Bezel in White. Designed to seal ceilings completely. Rapid installation through loop in/loop out push-fit wiring terminals with strain relief. Fully insulation coverable (blown or unwound) without the need of additional accessory or insulation cut-out. Vapour-barrier compatible. ISOPRO Kit includes the GU10 ICE lamp with superior thermal management which has been specifically designed and tested in fully enclosed insulation coverable downlights. Airtight and Acoustics rated.
Colour & Wattage Switchable IP44 Adjustable Low Glare Triac dimmable Aluminium LED Baffle Downlight Black. Baffled 30° horizontal adjustable design with the light source recessed to reduce glare. CRI90 for superior colour representation. Rapid tool-free installation through loop in / loop out push-fit wiring terminals with strain relief. Downlight and driver are insulation coverable without the need of additional accessory or insulation cut-out.
Colour & Wattage Switchable Aluminium LED Downlight for surface or recessed installations with adjustable cut-out. 3 Wattage and 3 Colour Selections available for ultimate flexibility in every application and perfect retrofit solution for renovations. One size fit all bracket for adjustable cut-out between 65-205mm enables flexible recessed or surface mount installation. Integrated non dimmable led driver for very low profile installation height of only 16mm. Supplied with 300mm pre -wired cable for quick installation.
Colour & Wattage Switchable Baffled Triac dimmable LED Fire Rated LED Downlight. IP65 sleek baffled design to reduce glare. Supplied with White Aluminium Bezel. Black and Satin Nickel options available. Rapid tool-free installation through loop in / loop out push-fit wiring terminals with strain relief. Compact integrated design with insulation cover allow for use in shallow voids up to 73mm. Downlight and driver are insulation coverable. Tested in 30 and 60 minutes fire -rated ceilings according to EN1365-2.
Colour & Wattage Selectable IP54 Impact-Resistant Commercial Surface -Mount Luminaire as perfect solution for new commercial applications or upgrading from compact fluorescent fittings in existing environments. Rear wiring compartment with push-fit terminals for quick, tool-free through-wiring. 3 Wattage and 2 Colour Selections available for ultimate flexibility in every application and perfect retrofit solution for renovations. Microwave sensor version with daylight harvesting: 110° detection angle, range up to 4 m, and adjustable hold time from 5 seconds to 10 minutes. IP54 & IK08 rated impact-resistant polycarbonate housing. Suitable for ambient temperatures from –20 °C to +40 °C.
This website uses cookies to ensure you get the best experience on our website
Deutsch
Français
