High Power IK10 impact resistant IP65 LED Highbay with superior efficiency of 180lm/W. Tool free interchangeable Lense design. Comes with 120° lense as standard, 90° lense options available as accessory. Integrated 0-10V dimmable LED driver pre-wired with 1500mm cable/220mm dim wire for ease of installation. 800mm safety cable included. Zhaga base for plug and play Microwave or PIR Sensor Module with detection range up to 12m. Sensor options available as accessory. Suitable for -40° - +50° ambient working temperature.
Colour Switchable IP44 Adjustable LED Downlight (120lm/W) with integrated Triac Dimmable LED driver. Coverable with any type of insulation material and airtight tested. Rapid tool-free installation through loop in/loop out push-fit wiring terminals with strain relief. Compact integrated low profile design with insulation cover allow for use in shallow voids up to 50mm. Colour Switchable between 2700/3000/4000K. LEDchroic lens design with 60° beam angle imitates the appearance of halogen lamps and provides controlled, uniform light distribution with minimal glare.
High intensity SMD LED Strip with 3m self adhesive tape. Cut points every 50mm for maximum flexibility. Beam angle of 120° and 120 LEDs per metre. For runs over 10 metres individual lengths should be connected in parallel.
High intensity SMD LED Strip with 3m self adhesive tape. Cut points every 50mm for maximum flexibility. Beam angle of 120° and 120 LEDs per metre. For runs over 10 metres individual lengths should be connected in parallel.
High intensity SMD LED Strip with 3m self adhesive tape. Cut points every 100mm for maximum flexibility. Beam angle of 120° and 120 LEDs per metre. For runs over 5 metres individual lengths should be connected in parallel.
High intensity SMD LED Strip with 3m self adhesive tape. Cut points every 100mm for maximum flexibility. Beam angle of 120° and 120 LEDs per metre. For runs over 10 metres individual lengths should be connected in parallel.
The DR157265 driver is a dimmable tunable white DALI-2 (DT8), PushDIM and PushCCT driver with adjustable constant current. It is supplied complete with a cable for connection to the luminaire. Dimming range from 1 to 100%. No flicker and smooth dimming in all light conditions. Output current adjustment ( 10 levels ) by means of micro-switches. Support CBS , central emergency application. Independent cable clamps ( inlet / outlet ).
The DR157272 driver is a dimmable driver (0)1-10V with adjustable constant current. It is delivered equipped with its connection cord to the luminaire. It allows the dimming of the luminaire and the stepless adjustment of the color temperature. Setting the output current using NFC via an APP available free of charge for iOS and Android. No flicker and smooth dimming regardless of brightness. Protection against overcharging, overheating and overvoltage. Hot wiring (load disconnection management).
The DR149635 driver is a phase cut dimmable driver. It is delivered pre -wired with350 mm of 2-conductor cable on the primary side and a 1/2 connectorized cord for connection to the luminaire. Dimming range from 5-15 to 100% (minimum brightness may vary depending on the performance of the dimmer used). No flicker and smooth dimming in all light conditions. Leading and trailing edge compatible.
The DR149642 driver is a phase cut dimmable driver. It is delivered pre -wired with350 mm of 2-conductor cable on the primary side and a 1/2 connectorized cord for connection to the luminaire. Dimming range from 5-15 to 100% (minimum brightness may vary depending on the performance of the dimmer used). No flicker and smooth dimming in all light conditions. Leading and trailing edge compatible.
The DR149659 driver is a phase cut dimmable driver. It is delivered pre -wired with350 mm of 2-conductor cable on the primary side and a 1/2 connectorized cord for connection to the luminaire. Dimming range from 5-15 to 100% (minimum brightness may vary depending on the performance of the dimmer used). No flicker and smooth dimming in all light conditions. Leading and trailing edge compatible.
The DR149666 driver is a phase cut dimmable driver. It is delivered pre -wired with350 mm of 2-conductor cable on the primary side and a 1/2 connectorized cord for connection to the luminaire. Dimming range from 5-15 to 100% (minimum brightness may vary depending on the performance of the dimmer used). No flicker and smooth dimming in all light conditions. Leading and trailing edge compatible.
Deutsch
Français
