Deutsch
Français
Home
There are 30 products.
FaloCS - DL149581
Colour Switchable IP44 Adjustable LED Downlight (120lm/W) with integrated Triac Dimmable LED driver. Coverable with any type of insulation material and airtight tested.
Rapid tool-free installation through loop in/loop out push-fit wiring terminals with strain relief.
Compact integrated low profile design with insulation cover allow for use in shallow voids up to 50mm.
Colour Switchable between 2700/3000/4000K.
LEDchroic lens design with 60° beam angle imitates the appearance of halogen lamps and provides controlled, uniform light distribution with minimal glare.
Rapid tool-free installation through loop in/loop out push-fit wiring terminals with strain relief.
Compact integrated low profile design with insulation cover allow for use in shallow voids up to 50mm.
Colour Switchable between 2700/3000/4000K.
LEDchroic lens design with 60° beam angle imitates the appearance of halogen lamps and provides controlled, uniform light distribution with minimal glare.
LEDline - ST153045
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDline - ST153052
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDline - ST156367
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 5 metres individual lengths should be connected in parallel.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 5 metres individual lengths should be connected in parallel.
LEDline - ST156435
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LumiCWS - DR157265
The DR157265 driver is a dimmable tunable white DALI-2 (DT8), PushDIM and PushCCT driver with adjustable constant current. It is supplied complete with a cable for connection to the luminaire.
Dimming range from 1 to 100%.
No flicker and smooth dimming in all light conditions.
Output current adjustment ( 10 levels ) by means of micro-switches.
Support CBS , central emergency application.
Independent cable clamps ( inlet / outlet ).
Dimming range from 1 to 100%.
No flicker and smooth dimming in all light conditions.
Output current adjustment ( 10 levels ) by means of micro-switches.
Support CBS , central emergency application.
Independent cable clamps ( inlet / outlet ).
Slim-Fit CS - DR149635
The DR149635 driver is a phase cut dimmable driver. It is delivered pre -wired with350 mm of 2-conductor cable on the primary side and a 1/2 connectorized cord for connection to the luminaire.
Dimming range from 5-15 to 100% (minimum brightness may vary depending on the performance of the dimmer used).
No flicker and smooth dimming in all light conditions.
Leading and trailing edge compatible.
Dimming range from 5-15 to 100% (minimum brightness may vary depending on the performance of the dimmer used).
No flicker and smooth dimming in all light conditions.
Leading and trailing edge compatible.
Slim-Fit CS - DR149642
The DR149642 driver is a phase cut dimmable driver. It is delivered pre -wired with350 mm of 2-conductor cable on the primary side and a 1/2 connectorized cord for connection to the luminaire.
Dimming range from 5-15 to 100% (minimum brightness may vary depending on the performance of the dimmer used).
No flicker and smooth dimming in all light conditions.
Leading and trailing edge compatible.
Dimming range from 5-15 to 100% (minimum brightness may vary depending on the performance of the dimmer used).
No flicker and smooth dimming in all light conditions.
Leading and trailing edge compatible.
Slim-Fit CS - DR149659
The DR149659 driver is a phase cut dimmable driver. It is delivered pre -wired with350 mm of 2-conductor cable on the primary side and a 1/2 connectorized cord for connection to the luminaire.
Dimming range from 5-15 to 100% (minimum brightness may vary depending on the performance of the dimmer used).
No flicker and smooth dimming in all light conditions.
Leading and trailing edge compatible.
Dimming range from 5-15 to 100% (minimum brightness may vary depending on the performance of the dimmer used).
No flicker and smooth dimming in all light conditions.
Leading and trailing edge compatible.
Slim-Fit CS - DR149666
The DR149666 driver is a phase cut dimmable driver. It is delivered pre -wired with350 mm of 2-conductor cable on the primary side and a 1/2 connectorized cord for connection to the luminaire.
Dimming range from 5-15 to 100% (minimum brightness may vary depending on the performance of the dimmer used).
No flicker and smooth dimming in all light conditions.
Leading and trailing edge compatible.
Dimming range from 5-15 to 100% (minimum brightness may vary depending on the performance of the dimmer used).
No flicker and smooth dimming in all light conditions.
Leading and trailing edge compatible.
