Deutsch
Français
Home
There are 222 products.
LEDline - ST153052
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDline - ST153045
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDline - ST153038
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDLINE - ST152802
SMD Single Colour LED Strip delivers the ideal balance of cost and performance. Supplied on a 5 m reel, complete with installation cable.
Cost-effective solution for general lighting applications. Perfect in combination with frosted diffuser profiles for smooth, uniform illumination.
Flexible installation with cut points every 20.8mm.
Beam angle of 150° and 60 LEDs per metre.
Connect individual lengths in parallel for runs longer than 5 metres.
Cost-effective solution for general lighting applications. Perfect in combination with frosted diffuser profiles for smooth, uniform illumination.
Flexible installation with cut points every 20.8mm.
Beam angle of 150° and 60 LEDs per metre.
Connect individual lengths in parallel for runs longer than 5 metres.
LEDLINE - ST152574
SMD Single Colour LED Strip delivers the ideal balance of cost and performance. Supplied on a 5 m reel, complete with installation cable.
Cost-effective solution for general lighting applications. Perfect in combination with frosted diffuser profiles for smooth, uniform illumination.
Flexible installation with cut points every 20.8mm.
Beam angle of 150° and 60 LEDs per metre.
Connect individual lengths in parallel for runs longer than 5 metres.
Cost-effective solution for general lighting applications. Perfect in combination with frosted diffuser profiles for smooth, uniform illumination.
Flexible installation with cut points every 20.8mm.
Beam angle of 150° and 60 LEDs per metre.
Connect individual lengths in parallel for runs longer than 5 metres.
LEDline - DR154639
Dimmable Phase Cut ( TRIAC) Constant Voltage (CV) LED driver.
SELV type with Short circuit, Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit, Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
LED DRIVER - DR154622
Dimmable Phase Cut ( TRIAC) Constant Voltage (CV) LED driver.
SELV type with Short circuit, Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit, Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
LED DRIVER - DR154615
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit, Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit, Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
LED DRIVER - DR154592
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit, Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit, Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
LED DRIVER - DR154585
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit, Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit, Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
LED DRIVER - DR152840
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit, Overload and Over voltage protection.
Loop in/out on primary side, 3 X 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit, Overload and Over voltage protection.
Loop in/out on primary side, 3 X 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
KLAY - DC155162
High quality die -cast aluminium multi-directional IP65 decorative wall lights. Twin Type product.
Direct and Indirect lighting through adjustable reflectors. Simple adjustments can be made from the top or bottom of the product.
Supplied with integrated non dimmable led driver for ease of installation.
Aluminium die -cast finish in Black.
Direct and Indirect lighting through adjustable reflectors. Simple adjustments can be made from the top or bottom of the product.
Supplied with integrated non dimmable led driver for ease of installation.
Aluminium die -cast finish in Black.
KLAY - DC155155
High quality die -cast aluminium multi-directional IP65 decorative wall lights. Twin Type product.
Direct and Indirect lighting through adjustable reflectors. Simple adjustments can be made from the top or bottom of the product.
Supplied with integrated non dimmable led driver for ease of installation.
Aluminium die -cast finish in Black.
Direct and Indirect lighting through adjustable reflectors. Simple adjustments can be made from the top or bottom of the product.
Supplied with integrated non dimmable led driver for ease of installation.
Aluminium die -cast finish in Black.