Deutsch
SpryteCS - DL149963
Colour Switchable compact integrated IP44 Triac dimmable Polycarbonate LED Downlights for installations in shallow ceiling voids.
Fixed and Adjustable versions offer best value for money and are ideal as GU10 replacement installations in limited recess space (56mm height).
LEDchroic lens design with 60° beam angle imitates the appearance of halogen lamps and provides controlled, uniform light distribution with minimal glare.
Class II and air leakage tested meeting latest building regulation requirements.
Pre-wired with 500mm 2 core cable allows tool free rapid installation.
Fixed and Adjustable versions offer best value for money and are ideal as GU10 replacement installations in limited recess space (56mm height).
LEDchroic lens design with 60° beam angle imitates the appearance of halogen lamps and provides controlled, uniform light distribution with minimal glare.
Class II and air leakage tested meeting latest building regulation requirements.
Pre-wired with 500mm 2 core cable allows tool free rapid installation.
DL149963
Data sheet
- Power (watts)
- 6
- Dimmable
- Yes
- Colour temperature
- 2700/3200/4000
- Lumens (lm)
- 550-600
- Lumens (lm/w)
- 100
- Colour (base)
- White
- Height (mm)
- 56
- Cutout diameter (mm)
- 60
- Product Diameter (mm)
- 78
- Warranty (years)
- 3
- Type of use
- Indoor
- Mount Options
- Recessed
- Positional adjustment
- Fixed
- Lifetime class
- L80
- Lifetime class hours
- 15000
- IP Rating
- IP44
- Protection class
- F
- CRI
- 80
- UGR rating
- 22
No customer reviews for the moment.
16 other products in the same category:
IzziWS Tilt - RT158026
Round recessed LED Tilt Spotlight designed to provide best qualitative and effective lighting on display surfaces with superior luminaire efficiency of up to 135 lm/W.
Wattage switch located at the back of the product for simple adjustment of light output even after the initial store opening. External driver with loop in/loop out connector allow rapid toolfree installation through push-fit terminals.
30° horizontal and vertical adjustable to adapt to changing point of sales environments in stores.
Interchangeable high-efficiency reflectors available as accessories in 24°, 36° and 52° beam angles as well as Low glare louver and Honeycomb cover.
Plug and Play high colour rendering COB (CRI95) enables product maintenance when reaching the end of product life.
Wattage switch located at the back of the product for simple adjustment of light output even after the initial store opening. External driver with loop in/loop out connector allow rapid toolfree installation through push-fit terminals.
30° horizontal and vertical adjustable to adapt to changing point of sales environments in stores.
Interchangeable high-efficiency reflectors available as accessories in 24°, 36° and 52° beam angles as well as Low glare louver and Honeycomb cover.
Plug and Play high colour rendering COB (CRI95) enables product maintenance when reaching the end of product life.
PavoCWS - DL150389
Colour & Wattage Switchable Polycarbonate LED Downlight for surface or recessed installations with adjustable cut-out.
3 Wattage and 3 Colour Selections available for ultimate flexibility in every application and perfect retrofit solution for renovations.
One size fit all bracket for adjustable cut-out between 65-180mm (DL149529 & DL151133) or 65-240mm (DL150389 & DL151140) enables flexible recessed or surface mount installation.
Integrated non dimmable led driver for very low profile installation height of only 17mm.
Magnetic design allows customization of white standard version with magnetic Black and Satin Nickel bezels.
3 Wattage and 3 Colour Selections available for ultimate flexibility in every application and perfect retrofit solution for renovations.
One size fit all bracket for adjustable cut-out between 65-180mm (DL149529 & DL151133) or 65-240mm (DL150389 & DL151140) enables flexible recessed or surface mount installation.
Integrated non dimmable led driver for very low profile installation height of only 17mm.
Magnetic design allows customization of white standard version with magnetic Black and Satin Nickel bezels.
BatPacCWS - CL149918
Colour & Wattage Switchable high-efficiency (150lm/W) LED Battens with opal diffuser for even and uniform light distribution.
Modular plug and play solution allows simple product extension on construction site by installing Microwave Sensor and/or Emergency Selftest Modules.
Integrated flicker-free non-dimmable driver with loop in loop out connector for simplified and fast installation, knockouts on both ends for cable entry.
2 Wattage and 3 Colour Selections available for ultimate flexibility in every application and perfect retrofit solution for single and twin fluorescent fittings.
Options: Microwave Sensor with 108° detection beam and range up to 4 meters. Emergency Pack 2.5W with Selftest function.
Modular plug and play solution allows simple product extension on construction site by installing Microwave Sensor and/or Emergency Selftest Modules.
Integrated flicker-free non-dimmable driver with loop in loop out connector for simplified and fast installation, knockouts on both ends for cable entry.
2 Wattage and 3 Colour Selections available for ultimate flexibility in every application and perfect retrofit solution for single and twin fluorescent fittings.
Options: Microwave Sensor with 108° detection beam and range up to 4 meters. Emergency Pack 2.5W with Selftest function.
LouvreCWS - LP158583
Colour Switchable high-efficiency (up to 140Im/W) Modular LED Reflector Panel uses low glare effector technology to replicate the appearance of traditional direct/indirect luminaires.
Full product modularity for maximum flexiblibility and product maintainance. Select individual components to customize your product according to your project requirements.
High efficiency light modules, available in white, black and silver, with low glare reflector module significantly reduce glare and enhance visual comfort.
Different Colour Finishes of Backplate and reflector module available for maximum flexibility in every application.
Full product modularity for maximum flexiblibility and product maintainance. Select individual components to customize your product according to your project requirements.
High efficiency light modules, available in white, black and silver, with low glare reflector module significantly reduce glare and enhance visual comfort.
Different Colour Finishes of Backplate and reflector module available for maximum flexibility in every application.
IsoPro - DL150068
IP65 GU10 Fire Rated Downlight including GU10 lamp and Fixed Aluminium Bezel. Designed to seal ceilings completely.
Rapid installation through loop in/loop out push-fit wiring terminals with strain relief.
Fully insulation coverable (blown or unwound) without the need of additional accessory or insulation cut-out. Vapour-barrier compatible.
ISOPRO Kit includes the GU10 ICE lamp with superior thermal management which has been specifically designed and tested in closed fire rated and insulation covered downlights Tested in 30, 60 and 90 minutes fire-rated ceilings according to EN1365-2.
Airtight and Acoustics rated.
Rapid installation through loop in/loop out push-fit wiring terminals with strain relief.
Fully insulation coverable (blown or unwound) without the need of additional accessory or insulation cut-out. Vapour-barrier compatible.
ISOPRO Kit includes the GU10 ICE lamp with superior thermal management which has been specifically designed and tested in closed fire rated and insulation covered downlights Tested in 30, 60 and 90 minutes fire-rated ceilings according to EN1365-2.
Airtight and Acoustics rated.
VelosCS - FL153847
Colour Switchable IP65 IK07 Residential LED Floodlight.
Aluminium housing for excellent heat dissipation pre-wired with 800mm cable for ease of installation.
Salt spray tested and approved, perfect solution for residential costal applications.
Aluminium housing for excellent heat dissipation pre-wired with 800mm cable for ease of installation.
Salt spray tested and approved, perfect solution for residential costal applications.
IsoPro - DL150037
IP65 GU10 Fire Rated Downlight including GU10 lamp and Fixed Aluminium Bezel. Designed to seal ceilings completely.
Rapid installation through loop in/loop out push-fit wiring terminals with strain relief.
Fully insulation coverable (blown or unwound) without the need of additional accessory or insulation cut-out. Vapour-barrier compatible.
ISOPRO Kit includes the GU10 ICE lamp with superior thermal management which has been specifically designed and tested in closed fire rated and insulation covered downlights Tested in 30, 60 and 90 minutes fire-rated ceilings according to EN1365-2.
Airtight and Acoustics rated.
Rapid installation through loop in/loop out push-fit wiring terminals with strain relief.
Fully insulation coverable (blown or unwound) without the need of additional accessory or insulation cut-out. Vapour-barrier compatible.
ISOPRO Kit includes the GU10 ICE lamp with superior thermal management which has been specifically designed and tested in closed fire rated and insulation covered downlights Tested in 30, 60 and 90 minutes fire-rated ceilings according to EN1365-2.
Airtight and Acoustics rated.
PavoCWS - DL151133
Colour & Wattage Switchable Polycarbonate LED Downlight for surface or recessed installations with adjustable cut-out.
3 Wattage and 3 Colour Selections available for ultimate flexibility in every application and perfect retrofit solution for renovations.
One size fit all bracket for adjustable cut-out between 65-180mm (DL149529 & DL151133) or 65-240mm (DL150389 & DL151140) enables flexible recessed or surface mount installation.
Integrated non dimmable led driver for very low profile installation height of only 17mm.
Magnetic design allows customization of white standard version with magnetic Black and Satin Nickel bezels.
3 Wattage and 3 Colour Selections available for ultimate flexibility in every application and perfect retrofit solution for renovations.
One size fit all bracket for adjustable cut-out between 65-180mm (DL149529 & DL151133) or 65-240mm (DL150389 & DL151140) enables flexible recessed or surface mount installation.
Integrated non dimmable led driver for very low profile installation height of only 17mm.
Magnetic design allows customization of white standard version with magnetic Black and Satin Nickel bezels.
ClearVu - LA150549
Cost effective and super reliable GU10 lamp range with advanced thermal management to control key component temperatures.
Single Colour version with LEDchroic lens design with 38° beam angle imitates the appearance of halogen lamps and provides controlled, uniform light distribution with minimal glare.
Designed and tested for suitable use in enclosed fire rated and insulation coverable lighting fixtures. Excellent dimming compatibility with all market common dimmers in Europe.
Single Colour version with LEDchroic lens design with 38° beam angle imitates the appearance of halogen lamps and provides controlled, uniform light distribution with minimal glare.
Designed and tested for suitable use in enclosed fire rated and insulation coverable lighting fixtures. Excellent dimming compatibility with all market common dimmers in Europe.
ApexCWS - RT153953
Colour & Wattage Switchable adjustable recessed Aluminium LED wallwasher designed to highlight displays and wall features. Perfect for applications that require high quality light output and superior colour rendering (CRI90).
Adjustable rotate and tilt angles to adapt to changing point of sales environments. Producing up to 3800 lumens from 38W LED, it is the perfect replacement for metal halide.
Rotates 350° with a horizontal adjustment of 50°. Opaque Polycarbonate diffuser with 90° beam angle.
Non-dimmable flicker-free driver pre-wired for ease of installation.
Adjustable rotate and tilt angles to adapt to changing point of sales environments. Producing up to 3800 lumens from 38W LED, it is the perfect replacement for metal halide.
Rotates 350° with a horizontal adjustment of 50°. Opaque Polycarbonate diffuser with 90° beam angle.
Non-dimmable flicker-free driver pre-wired for ease of installation.
VelosCS - FL157425
Colour Switchable IP65 IK07 Residential LED Floodlight.
Aluminium housing for excellent heat dissipation pre-wired with 800mm cable for ease of installation.
Salt spray tested and approved, perfect solution for residential costal applications.
Aluminium housing for excellent heat dissipation pre-wired with 800mm cable for ease of installation.
Salt spray tested and approved, perfect solution for residential costal applications.