Deutsch
LEDlineCOB - ST156589
Single colour high intensity COB LED Strip with 3m self adhesive backing for continuous light without LED hotspots.
Cut points every 50mm for maximum flexibility.
Beam angle of 150° and 480 LEDs per metre.
For runs over 5 metres individual lenghts should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 150° and 480 LEDs per metre.
For runs over 5 metres individual lenghts should be connected in parallel.
ST156589
Data sheet
- Colour temperature
- 4000
- Lumens (lm)
- 1200
- Width (mm)
- 12
- Depth (mm)
- 1000
- Warranty (years)
- 3
- IP Rating
- IP67
- CRI
- 80
No customer reviews for the moment.
You might also like
16 other products in the same category:
PavoCWS - DL149529
Colour & Wattage Switchable Polycarbonate LED Downlight for surface or recessed installations with adjustable cut-out.
3 Wattage and 3 Colour Selections available for ultimate flexibility in every application and perfect retrofit solution for renovations.
One size fit all bracket for adjustable cut-out between 65-180mm (DL149529 & DL151133) or 65-240mm (DL150389 & DL151140) enables flexible recessed or surface mount installation.
Integrated non dimmable led driver for very low profile installation height of only 17mm.
Magnetic design allows customization of white standard version with magnetic Black and Satin Nickel bezels.
3 Wattage and 3 Colour Selections available for ultimate flexibility in every application and perfect retrofit solution for renovations.
One size fit all bracket for adjustable cut-out between 65-180mm (DL149529 & DL151133) or 65-240mm (DL150389 & DL151140) enables flexible recessed or surface mount installation.
Integrated non dimmable led driver for very low profile installation height of only 17mm.
Magnetic design allows customization of white standard version with magnetic Black and Satin Nickel bezels.
ProximusWS - FL157791
Wattage Selectable High Power impact resistant IP66 LED Floodlight with picture superior efficiency of up to 160m/W.
Polycarbonate assymmetrical lense.
Integrated non dimmable LED driver pre-wired with 1000mm AC cable for ease of installation.
Suitable for -40°C - +50°C ambient working temperature.
Polycarbonate assymmetrical lense.
Integrated non dimmable LED driver pre-wired with 1000mm AC cable for ease of installation.
Suitable for -40°C - +50°C ambient working temperature.
ProximusWS - FL157777
Wattage Selectable High Power impact resistant IP66 LED Floodlight with superior efficiency of up to 160m/W.
120° polycarbonate symmetrical lense.
Integrated non dimmable LED driver pre-wired with 1000mm AC cable for ease of installation.
Suitable for -40°C - +50°C ambient working temperature.
120° polycarbonate symmetrical lense.
Integrated non dimmable LED driver pre-wired with 1000mm AC cable for ease of installation.
Suitable for -40°C - +50°C ambient working temperature.
LEDlineCOB - ST153007
Single colour high intensity COB LED Strip with 3m self adhesive backing for continuous light without LED hotspots.
Cut points every 50mm for maximum flexibility.
Beam angle of 150° and 480 LEDs per metre.
For runs over 5 metres individual lenghts should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 150° and 480 LEDs per metre.
For runs over 5 metres individual lenghts should be connected in parallel.
LumiCWS - DL157234
Colour & Wattage Selectable IP54 die-cast aluminium high efficiency UGR19 Commercial LED Downlight range are a perfect solution for new commercial applications or upgrading from compact fluorescent fittings in existing environments.
Low glare aluminium specular reflector provides excellent glare control with UGR19 and even light distribution.
Supplied with slight recessed white frame. Black available as accessory.
Supplied with flicker-free non-dimmable LED driver with push-fit terminal block for simplified and fast through-wiring installation. DALI and 1-10v driver options available.
Low glare aluminium specular reflector provides excellent glare control with UGR19 and even light distribution.
Supplied with slight recessed white frame. Black available as accessory.
Supplied with flicker-free non-dimmable LED driver with push-fit terminal block for simplified and fast through-wiring installation. DALI and 1-10v driver options available.
PavoCWS PRO - DL151966
Colour & Wattage Switchable Aluminium LED Downlight for surface or recessed installations with adjustable cut-out.
3 Wattage and 3 Colour Selections available for ultimate flexibility in every application and perfect retrofit solution for renovations.
One size fit all bracket for adjustable cut-out between 65-205mm enables flexible recessed or surface mount installation.
Integrated non dimmable led driver for very low profile installation height of only 16mm.
Supplied with 300mm pre-wired cable for quick installation.
3 Wattage and 3 Colour Selections available for ultimate flexibility in every application and perfect retrofit solution for renovations.
One size fit all bracket for adjustable cut-out between 65-205mm enables flexible recessed or surface mount installation.
Integrated non dimmable led driver for very low profile installation height of only 16mm.
Supplied with 300mm pre-wired cable for quick installation.
LEDline - ST156367
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 5 metres individual lengths should be connected in parallel.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 5 metres individual lengths should be connected in parallel.
LEDlineCOB - ST159566
Tuneable White high intensity COB LED Strip with 3M self adhesive backing for continuous light without LED hotspots.
Cut points every 25mm for maximum flexibility.
Beam angle of 130° and 640 LEDs per metre.
For runs over 5 metres individual lenghts should be connected in parallel.
Cut points every 25mm for maximum flexibility.
Beam angle of 130° and 640 LEDs per metre.
For runs over 5 metres individual lenghts should be connected in parallel.
Asimes - BH156824
Colour Switchable IP65 Asymetrical Bulkhead with opal polycarbonate IK10 diffuser for even and uniform light distribution. Perfect for demanding wall and ceiling installations.
3 Colour Selections available for ultimate flexibility in every application.
IP65 rated rear entry access wiring compartment enable quick and simple through-wiring and product installation.
Suitable for ambient temperatures from -20°C to +45°C.
3 Colour Selections available for ultimate flexibility in every application.
IP65 rated rear entry access wiring compartment enable quick and simple through-wiring and product installation.
Suitable for ambient temperatures from -20°C to +45°C.
LEDlineCOB - ST159627
RGB high intensity COB LED Strip with 3M self adhesive backing for continuous light without LED hotspots.
Cut points every 25mm for maximum flexibility.
Beam angle of 130° and 840 LEDs per metre.
For runs over 5 metres individual lenghts should be connected in parallel.
Cut points every 25mm for maximum flexibility.
Beam angle of 130° and 840 LEDs per metre.
For runs over 5 metres individual lenghts should be connected in parallel.
ProximusWS - FL157760
Wattage Selectable High Power impact resistant IP66 LED Floodlight with superior efficiency of up to 160m/W.
120° polycarbonate symmetrical lense.
Integrated non dimmable LED driver pre-wired with 1000mm AC cable for ease of installation.
Suitable for -40°C - +50°C ambient working temperature.
120° polycarbonate symmetrical lense.
Integrated non dimmable LED driver pre-wired with 1000mm AC cable for ease of installation.
Suitable for -40°C - +50°C ambient working temperature.
LEDlineCOB - ST152994
Single colour high intensity COB LED Strip with 3m self adhesive backing for continuous light without LED hotspots.
Cut points every 50mm for maximum flexibility.
Beam angle of 150° and 480 LEDs per metre.
For runs over 5 metres individual lenghts should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 150° and 480 LEDs per metre.
For runs over 5 metres individual lenghts should be connected in parallel.
LEDline - ST153038
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LumiCWS - DL151089
Colour & Wattage Selectable IP54 die-cast aluminium high efficiency UGR19 Commercial LED Downlight range are a perfect solution for new commercial applications or upgrading from compact fluorescent fittings in existing environments.
Low glare aluminium specular reflector provides excellent glare control with UGR19 and even light distribution.
Supplied with slight recessed white frame. Black available as accessory.
Supplied with flicker-free non-dimmable LED driver with push-fit terminal block for simplified and fast through-wiring installation. DALI and 1-10v driver options available.
Low glare aluminium specular reflector provides excellent glare control with UGR19 and even light distribution.
Supplied with slight recessed white frame. Black available as accessory.
Supplied with flicker-free non-dimmable LED driver with push-fit terminal block for simplified and fast through-wiring installation. DALI and 1-10v driver options available.
ONExBAFFLE - DL151379
Colour & Wattage Switchable Baffled Triac dimmable LED Fire Rated LED Downlight.
IP65 sleek baffled design to reduce glare. Supplied with White Aluminium Bezel. Black and Satin Nickel options available.
Rapid tool-free installation through loop in / loop out push-fit wiring terminals with strain relief.
Compact integrated design with insulation cover allow for use in shallow voids up to 73mm. Downlight and driver are insulation coverable.
Tested in 30, 60 and 90 minutes fire-rated ceilings according to EN1365-2.
IP65 sleek baffled design to reduce glare. Supplied with White Aluminium Bezel. Black and Satin Nickel options available.
Rapid tool-free installation through loop in / loop out push-fit wiring terminals with strain relief.
Compact integrated design with insulation cover allow for use in shallow voids up to 73mm. Downlight and driver are insulation coverable.
Tested in 30, 60 and 90 minutes fire-rated ceilings according to EN1365-2.
LEDline - ST156435
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.