Deutsch
Français
RANGES
There are 62 products.
LEDline - ST156213
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDline - ST156220
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDline - ST156367
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 5 metres individual lengths should be connected in parallel.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 5 metres individual lengths should be connected in parallel.
LEDline - ST156435
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDline - ST159665
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
made by concatenation
Dimmable Phase Cut ( TRIAC) Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
Loop in/out on primary side; 3 X 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
Loop in/out on primary side; 3 X 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
PrincetonWS - LN212001
Wattage Switchable Low Glare Surface Mount Commercial Linear as perfect energy saving solution to fluorescent fittings.
Robust quality housing with micro-prismatic optics ensures even and uniform light distribution with minimal glare UGR19.
Drop down gear tray can be locked after installation and maintenance for safer operation.
Non dimmable driver with push-fit terminal enables rapid installation.
Wattage Switchable during installation between 22W/28W/34W and 40W.
Robust quality housing with micro-prismatic optics ensures even and uniform light distribution with minimal glare UGR19.
Drop down gear tray can be locked after installation and maintenance for safer operation.
Non dimmable driver with push-fit terminal enables rapid installation.
Wattage Switchable during installation between 22W/28W/34W and 40W.
PrincetonWS - LN215001
Wattage Switchable Low Glare Surface Mount Commercial Linear as perfect energy saving solution to fluorescent fittings.
Robust quality housing with micro-prismatic optics ensures even and uniform light distribution with minimal glare UGR19.
Drop down gear tray can be locked after installation and maintenance for safer operation.
Non dimmable driver with push-fit terminal enables rapid installation.
Wattage Switchable during installation between 34W/43W/52W and 60W.
Robust quality housing with micro-prismatic optics ensures even and uniform light distribution with minimal glare UGR19.
Drop down gear tray can be locked after installation and maintenance for safer operation.
Non dimmable driver with push-fit terminal enables rapid installation.
Wattage Switchable during installation between 34W/43W/52W and 60W.
Slim-Fit CS - DL150235
Colour Switchable super-slim Aluminium edge-lite low profile LED Downlights are ideal for installations in limited recess space (23mm including driver).
Wide product range covers most common cut-out dimensions of traditional light sources and delivers enhanced energy savings.
PMMA light guide with PC diffusor for low glare even light distribution.
Supplied with remote non-dimmable constant current driver and 150mm cable for ease of installation.
Dimmable driver options as accessory.
Wide product range covers most common cut-out dimensions of traditional light sources and delivers enhanced energy savings.
PMMA light guide with PC diffusor for low glare even light distribution.
Supplied with remote non-dimmable constant current driver and 150mm cable for ease of installation.
Dimmable driver options as accessory.
Slim-Fit CS - DL150242
Colour Switchable super-slim Aluminium edge-lite low profile LED Downlights are ideal for installations in limited recess space (23mm including driver).
Wide product range covers most common cut-out dimensions of traditional light sources and delivers enhanced energy savings.
PMMA light guide with PC diffusor for low glare even light distribution.
Supplied with remote non-dimmable constant current driver and 150mm cable for ease of installation.
Dimmable driver options as accessory.
Wide product range covers most common cut-out dimensions of traditional light sources and delivers enhanced energy savings.
PMMA light guide with PC diffusor for low glare even light distribution.
Supplied with remote non-dimmable constant current driver and 150mm cable for ease of installation.
Dimmable driver options as accessory.