Deutsch
Français
RANGES
There are 61 products.
Active filters
LEDline - ST156213
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDline - ST156220
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDline - ST156367
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 5 metres individual lengths should be connected in parallel.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 5 metres individual lengths should be connected in parallel.
LEDline - ST156435
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDline - ST159665
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LinearPacWS - AC156930
High-efficiency (150lm/W) IP65 corrosion-resistant linear batten with opal diffuser for even and uniform light distribution.
IP65 rated cable glands on both ends as well as at rear entrance enable quick and simple through-wiring and product installation.
Quick release hinged gear tray with durable stainless steel anti-tamper clips fitted for faster installation and maintenance. After the base is secured, the diffuser simply clips into place.
IK08 polycarbonate diffuser and housing vandal-proof. Suitable for ambient temperatures from -20°C to +40°C.
4 Wattage Selections available for ultimate flexibility in every application and perfect retrofit solution for single and twin fluorescent fittings.
IP65 rated cable glands on both ends as well as at rear entrance enable quick and simple through-wiring and product installation.
Quick release hinged gear tray with durable stainless steel anti-tamper clips fitted for faster installation and maintenance. After the base is secured, the diffuser simply clips into place.
IK08 polycarbonate diffuser and housing vandal-proof. Suitable for ambient temperatures from -20°C to +40°C.
4 Wattage Selections available for ultimate flexibility in every application and perfect retrofit solution for single and twin fluorescent fittings.
LinearPacWS - AC156947
High-efficiency (150lm/W) IP65 corrosion-resistant linear batten with opal diffuser for even and uniform light distribution.
IP65 rated cable glands on both ends as well as at rear entrance enable quick and simple through-wiring and product installation.
Quick release hinged gear tray with durable stainless steel anti-tamper clips fitted for faster installation and maintenance. After the base is secured, the diffuser simply clips into place.
IK08 polycarbonate diffuser and housing vandal-proof. Suitable for ambient temperatures from -20°C to +40°C.
4 Wattage Selections available for ultimate flexibility in every application and perfect retrofit solution for single and twin fluorescent fittings.
IP65 rated cable glands on both ends as well as at rear entrance enable quick and simple through-wiring and product installation.
Quick release hinged gear tray with durable stainless steel anti-tamper clips fitted for faster installation and maintenance. After the base is secured, the diffuser simply clips into place.
IK08 polycarbonate diffuser and housing vandal-proof. Suitable for ambient temperatures from -20°C to +40°C.
4 Wattage Selections available for ultimate flexibility in every application and perfect retrofit solution for single and twin fluorescent fittings.
made by concatenation
Dimmable Phase Cut ( TRIAC) Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
Loop in/out on primary side; 3 X 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
Loop in/out on primary side; 3 X 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Wattage Switchable High-Power IP66 Weather-Resistant LED Floodlight designed for unprotected outdoor areas with superior efficiency of 160 lm/W.
Available with either a symmetrical 90° lens or a 50x100° asymmetrical light distribution for versatile applications.
Integrated non-dimmable LED driver with 6 kV surge protection and instant heat dissipation for extended lifespan. Pre-wired with 1000 mm AC cable for safe, simplified installation.
Ultra-durable high-pressure die-cast aluminium housing with glass cover. Weather-resistant and salt spray tested to C4-M standard.
UV resistant and suitable for installations in unprotected outdoor areas with ambient temperatures from –40 °C to +50 °C.
Available with either a symmetrical 90° lens or a 50x100° asymmetrical light distribution for versatile applications.
Integrated non-dimmable LED driver with 6 kV surge protection and instant heat dissipation for extended lifespan. Pre-wired with 1000 mm AC cable for safe, simplified installation.
Ultra-durable high-pressure die-cast aluminium housing with glass cover. Weather-resistant and salt spray tested to C4-M standard.
UV resistant and suitable for installations in unprotected outdoor areas with ambient temperatures from –40 °C to +50 °C.
made by concatenation
Wattage Switchable High-Power IP66 Weather-Resistant LED Floodlight designed for unprotected outdoor areas with superior efficiency of 160 lm/W.
Available with either a symmetrical 90° lens or a 50x100° asymmetrical light distribution for versatile applications.
Integrated non-dimmable LED driver with 6 kV surge protection and instant heat dissipation for extended lifespan. Pre-wired with 1000 mm AC cable for safe, simplified installation.
Ultra-durable high-pressure die-cast aluminium housing with glass cover. Weather-resistant and salt spray tested to C4-M standard.
UV resistant and suitable for installations in unprotected outdoor areas with ambient temperatures from –40 °C to +50 °C.
Available with either a symmetrical 90° lens or a 50x100° asymmetrical light distribution for versatile applications.
Integrated non-dimmable LED driver with 6 kV surge protection and instant heat dissipation for extended lifespan. Pre-wired with 1000 mm AC cable for safe, simplified installation.
Ultra-durable high-pressure die-cast aluminium housing with glass cover. Weather-resistant and salt spray tested to C4-M standard.
UV resistant and suitable for installations in unprotected outdoor areas with ambient temperatures from –40 °C to +50 °C.
made by concatenation
Wattage Switchable High-Power IP66 Weather-Resistant LED Floodlight designed for unprotected outdoor areas with superior efficiency of 160 lm/W.
Available with either a symmetrical 90° lens or a 50x100° asymmetrical light distribution for versatile applications.
Integrated non-dimmable LED driver with 6 kV surge protection and instant heat dissipation for extended lifespan. Pre-wired with 1000 mm AC cable for safe, simplified installation.
Ultra-durable high-pressure die-cast aluminium housing with glass cover. Weather-resistant and salt spray tested to C4-M standard.
UV resistant and suitable for installations in unprotected outdoor areas with ambient temperatures from –40 °C to +50 °C.
Available with either a symmetrical 90° lens or a 50x100° asymmetrical light distribution for versatile applications.
Integrated non-dimmable LED driver with 6 kV surge protection and instant heat dissipation for extended lifespan. Pre-wired with 1000 mm AC cable for safe, simplified installation.
Ultra-durable high-pressure die-cast aluminium housing with glass cover. Weather-resistant and salt spray tested to C4-M standard.
UV resistant and suitable for installations in unprotected outdoor areas with ambient temperatures from –40 °C to +50 °C.