Deutsch
Français
RANGES
There are 57 products.
Active filters
LEDline - ST156213
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDline - ST156220
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDline - ST156367
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 5 metres individual lengths should be connected in parallel.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 5 metres individual lengths should be connected in parallel.
LEDline - ST156435
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDline - ST159665
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
made by concatenation
Dimmable Phase Cut ( TRIAC) Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
Loop in/out on primary side; 3 X 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
Loop in/out on primary side; 3 X 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Colour and wattage Switchable IP65 Bulkhead with integrated PIR sensor and opal polycarbonate IK10 diffuser for even and uniform light distribution provides best energy saving.
Integrated infrared detector sensor with daylight harvesting feature. When people enter its detection range and triggers, lights turn on. When people leave its detection area, the light will automatically turn off. Ambient illumination <10Iux-2000Iux adjustable, delay time 10s - 10min.
3 Colour Selections (3000K/3500K/4000K) available for ultimate flexibility in every application.
IP65 rated rear entry access wiring compartment enables quick and simple product installation.
UV resistant and suitable for installations in unprotected outdoor areas with ambient temperatures from -25°C to +45°C.
Integrated infrared detector sensor with daylight harvesting feature. When people enter its detection range and triggers, lights turn on. When people leave its detection area, the light will automatically turn off. Ambient illumination <10Iux-2000Iux adjustable, delay time 10s - 10min.
3 Colour Selections (3000K/3500K/4000K) available for ultimate flexibility in every application.
IP65 rated rear entry access wiring compartment enables quick and simple product installation.
UV resistant and suitable for installations in unprotected outdoor areas with ambient temperatures from -25°C to +45°C.
ONExBAFFLE - DL151379
Colour & Wattage Switchable Baffled Triac dimmable LED Fire Rated LED Downlight.
IP65 sleek baffled design to reduce glare. Supplied with White Aluminium Bezel. Black and Satin Nickel options available.
Rapid tool-free installation through loop in / loop out push-fit wiring terminals with strain relief.
Compact integrated design with insulation cover allow for use in shallow voids up to 73mm. Downlight and driver are insulation coverable.
Tested in 30 and 60 minutes fire-rated ceilings according to EN1365-2.
IP65 sleek baffled design to reduce glare. Supplied with White Aluminium Bezel. Black and Satin Nickel options available.
Rapid tool-free installation through loop in / loop out push-fit wiring terminals with strain relief.
Compact integrated design with insulation cover allow for use in shallow voids up to 73mm. Downlight and driver are insulation coverable.
Tested in 30 and 60 minutes fire-rated ceilings according to EN1365-2.
Uni-Fit Baffle CS - DL150495
Colour Switchable Compact Integrated IP44 low Glare Commercial LED Downlight range are a perfect value for money solution for new commercial applications or upgrading from compact fluorescent fittings in existing environments.
Low glare baffled aluminium specular reflector provides great glare control and even light distribution.
Colour Switchable between 3000/4000K for an on-site adaptation.
Supplied with slight recessed white bezel frame.
Integrated non-dimmable driver and pre-wired with 500mm cable for ease of installation.
Low glare baffled aluminium specular reflector provides great glare control and even light distribution.
Colour Switchable between 3000/4000K for an on-site adaptation.
Supplied with slight recessed white bezel frame.
Integrated non-dimmable driver and pre-wired with 500mm cable for ease of installation.