Deutsch
Français
RANGES
There are 54 products.
Active filters
LEDline - ST156213
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDline - ST156220
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDline - ST156367
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 5 metres individual lengths should be connected in parallel.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 5 metres individual lengths should be connected in parallel.
LEDline - ST156435
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDline - ST159665
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
made by concatenation
Dimmable Phase Cut ( TRIAC) Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
Loop in/out on primary side; 3 X 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
Loop in/out on primary side; 3 X 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Colour Switchable Die-Cast Aluminium Decorative Wall Light suitable for both indoor and outdoor installations.
Durable IP65 rated, impact resistant and salt-spray tested housing for long service life.
Superior optical convex lens design ensures precise, direct/indirect symmetrical light distribution. Available as direct or direct/indirect version.
Integrated TRIAC dimmable LED driver with junction box for simplified installation.
Durable IP65 rated, impact resistant and salt-spray tested housing for long service life.
Superior optical convex lens design ensures precise, direct/indirect symmetrical light distribution. Available as direct or direct/indirect version.
Integrated TRIAC dimmable LED driver with junction box for simplified installation.
made by concatenation
Colour Switchable Up/Down Aluminium IP65 Wall Lights with integrated non dimmable driver.
Slim Aluminium body IK08 with clear polycarbonate diffuser.
Colour Switchable between 2700K/3300K/4000K prior to installation.
Aluminium Body with Finish in Black.
Slim Aluminium body IK08 with clear polycarbonate diffuser.
Colour Switchable between 2700K/3300K/4000K prior to installation.
Aluminium Body with Finish in Black.
made by concatenation
Corrosion-resistant eco linear batten IP66 rated with opal diffuser for even and uniform light distribution offers best value for money.
IP66 rated cable glands on both ends with 3pol terminal block enable quick and simple through-wiring and product installation.
IK08 polycarbonate diffuser and housing vandal-proof.
Résisant aux UV et conçu pour les environnements extérieurs non abrités avec températures ambiantes de -20°C à +45°C.
IP66 rated cable glands on both ends with 3pol terminal block enable quick and simple through-wiring and product installation.
IK08 polycarbonate diffuser and housing vandal-proof.
Résisant aux UV et conçu pour les environnements extérieurs non abrités avec températures ambiantes de -20°C à +45°C.
made by concatenation
Corrosion-resistant eco linear batten IP66 rated with opal diffuser for even and uniform light distribution offers best value for money.
IP66 rated cable glands on both ends with 3pol terminal block enable quick and simple through-wiring and product installation.
IK08 polycarbonate diffuser and housing vandal-proof.
UV resistant and suitable for installations in unprotected outdoor areas with ambient temperatures from –20 °C to +45 °C.
IP66 rated cable glands on both ends with 3pol terminal block enable quick and simple through-wiring and product installation.
IK08 polycarbonate diffuser and housing vandal-proof.
UV resistant and suitable for installations in unprotected outdoor areas with ambient temperatures from –20 °C to +45 °C.
ONExBAFFLE - DL151379
Colour & Wattage Switchable Baffled Triac dimmable LED Fire Rated LED Downlight.
IP65 sleek baffled design to reduce glare. Supplied with White Aluminium Bezel. Black and Satin Nickel options available.
Rapid tool-free installation through loop in / loop out push-fit wiring terminals with strain relief.
Compact integrated design with insulation cover allow for use in shallow voids up to 73mm. Downlight and driver are insulation coverable.
Tested in 30 and 60 minutes fire-rated ceilings according to EN1365-2.
IP65 sleek baffled design to reduce glare. Supplied with White Aluminium Bezel. Black and Satin Nickel options available.
Rapid tool-free installation through loop in / loop out push-fit wiring terminals with strain relief.
Compact integrated design with insulation cover allow for use in shallow voids up to 73mm. Downlight and driver are insulation coverable.
Tested in 30 and 60 minutes fire-rated ceilings according to EN1365-2.