Deutsch
Français
RANGES
There are 57 products.
Active filters
LEDline - ST156213
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDline - ST156220
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDline - ST156367
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 5 metres individual lengths should be connected in parallel.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 5 metres individual lengths should be connected in parallel.
LEDline - ST156435
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDline - ST159665
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
made by concatenation
The DR159443 driver is a dimmable DALI-2 and PushDIM driver with adjustable constant current. It is supplied complete with a IP65 cable for connection to the luminaire.
Dimming range from 1 to 100%.
No flicker and smooth dimming in all light conditions.
Output current adjustment ( 10 levels ) by means of micro-switches.
Support CBS , central emergency application.
Independent cable clamps ( inlet / outlet ).
Dimming range from 1 to 100%.
No flicker and smooth dimming in all light conditions.
Output current adjustment ( 10 levels ) by means of micro-switches.
Support CBS , central emergency application.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Dimmable Phase Cut ( TRIAC) Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
Loop in/out on primary side; 3 X 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
Loop in/out on primary side; 3 X 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Colour Switchable IP65 Round Bulkhead with opal polycarbonate IK06 diffuser offer best value for money solution.
IP65 rated rear and side entry access wiring compartment enable quick and simple through-wiring and product installation.
Colour switchable between 3000K, 4000K & 6500K.
Suitable for ambient temperatures from -20°C to +40°C.
IP65 rated rear and side entry access wiring compartment enable quick and simple through-wiring and product installation.
Colour switchable between 3000K, 4000K & 6500K.
Suitable for ambient temperatures from -20°C to +40°C.
made by concatenation
Colour Switchable IP65 Round Bulkhead with opal polycarbonate IK06 diffuser offer best value for money solution.
IP65 rated rear and side entry access wiring compartment enable quick and simple through-wiring and product installation.
Colour switchable between 3000K, 4000K & 6500K.
Suitable for ambient temperatures from -20°C to +40°C.
IP65 rated rear and side entry access wiring compartment enable quick and simple through-wiring and product installation.
Colour switchable between 3000K, 4000K & 6500K.
Suitable for ambient temperatures from -20°C to +40°C.
made by concatenation
Colour Switchable IP65 Round Bulkhead with opal polycarbonate IK06 diffuser offer best value for money solution.
IP65 rated rear and side entry access wiring compartment enable quick and simple through-wiring and product installation.
Colour switchable between 3000K, 4000K & 6500K.
Suitable for ambient temperatures from -20°C to +40°C.
IP65 rated rear and side entry access wiring compartment enable quick and simple through-wiring and product installation.
Colour switchable between 3000K, 4000K & 6500K.
Suitable for ambient temperatures from -20°C to +40°C.
made by concatenation
Colour Switchable IP65 Oval Bulkhead with opal polycarbonate IK06 diffuser offer best value for money solution.
IP65 rated rear and side entry access wiring compartment enable quick and simple through-wiring and product installation.
Colour switchable between 3000K, 4000K & 6500K.
Suitable for ambient temperatures from -20°C to +40°C.
IP65 rated rear and side entry access wiring compartment enable quick and simple through-wiring and product installation.
Colour switchable between 3000K, 4000K & 6500K.
Suitable for ambient temperatures from -20°C to +40°C.