Deutsch
Français
RANGES
There are 61 products.
Active filters
LEDline - ST156213
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDline - ST156220
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDline - ST156367
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 5 metres individual lengths should be connected in parallel.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 5 metres individual lengths should be connected in parallel.
LEDline - ST156435
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDline - ST159665
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
made by concatenation
Dimmable Phase Cut ( TRIAC) Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
Loop in/out on primary side; 3 X 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
Loop in/out on primary side; 3 X 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Wattage Switchable High-Power IP66 Weather-Resistant LED Floodlight designed for unprotected outdoor areas with superior efficiency of 160 lm/W.
Available with either a symmetrical 90° lens or a 50x100° asymmetrical light distribution for versatile applications.
Integrated non-dimmable LED driver with 6 kV surge protection and instant heat dissipation for extended lifespan. Pre-wired with 1000 mm AC cable for safe, simplified installation.
Ultra-durable high-pressure die-cast aluminium housing with glass cover. Weather-resistant and salt spray tested to C4-M standard.
UV resistant and suitable for installations in unprotected outdoor areas with ambient temperatures from –40 °C to +50 °C.
Available with either a symmetrical 90° lens or a 50x100° asymmetrical light distribution for versatile applications.
Integrated non-dimmable LED driver with 6 kV surge protection and instant heat dissipation for extended lifespan. Pre-wired with 1000 mm AC cable for safe, simplified installation.
Ultra-durable high-pressure die-cast aluminium housing with glass cover. Weather-resistant and salt spray tested to C4-M standard.
UV resistant and suitable for installations in unprotected outdoor areas with ambient temperatures from –40 °C to +50 °C.
made by concatenation
Wattage Switchable High-Power IP66 Weather-Resistant LED Floodlight designed for unprotected outdoor areas with superior efficiency of 160 lm/W.
Available with either a symmetrical 90° lens or a 50x100° asymmetrical light distribution for versatile applications.
Integrated non-dimmable LED driver with 6 kV surge protection and instant heat dissipation for extended lifespan. Pre-wired with 1000 mm AC cable for safe, simplified installation.
Ultra-durable high-pressure die-cast aluminium housing with glass cover. Weather-resistant and salt spray tested to C4-M standard.
UV resistant and suitable for installations in unprotected outdoor areas with ambient temperatures from –40 °C to +50 °C.
Available with either a symmetrical 90° lens or a 50x100° asymmetrical light distribution for versatile applications.
Integrated non-dimmable LED driver with 6 kV surge protection and instant heat dissipation for extended lifespan. Pre-wired with 1000 mm AC cable for safe, simplified installation.
Ultra-durable high-pressure die-cast aluminium housing with glass cover. Weather-resistant and salt spray tested to C4-M standard.
UV resistant and suitable for installations in unprotected outdoor areas with ambient temperatures from –40 °C to +50 °C.