0

Filter By

Categories

Categories

Colour (base)

Colour (base)

tags

    No tags have been specified yet.

Active filters

  • Categories: LEDline
  • Categories: LUMI CWS
  • Categories: Slim-Fit CS
  • Categories: Spheral

LumiCWS - DR157272

The DR157272 driver is a dimmable driver (0)1-10V with adjustable constant current. It is delivered equipped with its connection cord to the luminaire.
It allows the dimming of the luminaire and the stepless adjustment of the color temperature.
Setting the output current using NFC via an APP available free of charge for iOS and Android.
No flicker and smooth dimming regardless of brightness.
Protection against overcharging, overheating and overvoltage.
Hot wiring (load disconnection management).

made by concatenation

Dimmable Phase Cut ( TRIAC) Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).


made by concatenation

Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).


made by concatenation

Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).


made by concatenation

Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).


made by concatenation

Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
Loop in/out on primary side; 3 X 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).


made by concatenation

IP65 18W Bulkhead with opal polycarbonate IK10 diffuser for even and uniform light distribution offer best value for money.
IP65 rated rear and side entry access wiring compartment enable quick and simple through-wiring and product installation.
Microwave Sensor version with daylight harvesting feature, 110° detection range up to 4 meter and adjustable hold time configurations from 5 seconds to 30 minutes available.
UV resistant and suitable for installations in unprotected outdoor areas with ambient temperatures from -25°C to +45°C.



made by concatenation

IP65 18W Bulkhead with opal polycarbonate IK10 diffuser for even and uniform light distribution offer best value for money.
IP65 rated rear and side entry access wiring compartment enable quick and simple through-wiring and product installation.
Microwave Sensor version with daylight harvesting feature, 110° detection range up to 4 meter and adjustable hold time configurations from 5 seconds to 30 minutes available.
UV resistant and suitable for installations in unprotected outdoor areas with ambient temperatures from -25°C to +45°C.



Slim-Fit CS - DL150235

Colour Switchable super-slim Aluminium edge-lite low profile LED Downlights are ideal for installations in limited recess space (23mm including driver).
Wide product range covers most common cut-out dimensions of traditional light sources and delivers enhanced energy savings.
PMMA light guide with PC diffusor for low glare even light distribution.
Supplied with remote non-dimmable constant current driver and 150mm cable for ease of installation.
Dimmable driver options as accessory.


Slim-Fit CS - DL150242

Colour Switchable super-slim Aluminium edge-lite low profile LED Downlights are ideal for installations in limited recess space (23mm including driver).
Wide product range covers most common cut-out dimensions of traditional light sources and delivers enhanced energy savings.
PMMA light guide with PC diffusor for low glare even light distribution.
Supplied with remote non-dimmable constant current driver and 150mm cable for ease of installation.
Dimmable driver options as accessory.


Slim-Fit CS - DL150259

Colour Switchable super-slim Aluminium edge-lite low profile LED Downlights are ideal for installations in limited recess space (23mm including driver).
Wide product range covers most common cut-out dimensions of traditional light sources and delivers enhanced energy savings.
PMMA light guide with PC diffusor for low glare even light distribution.
Supplied with remote non-dimmable constant current driver and 150mm cable for ease of installation.
Dimmable driver options as accessory.


Slim-Fit CS - DL150266

Colour Switchable super-slim Aluminium edge-lite low profile LED Downlights are ideal for installations in limited recess space (23mm including driver).
Wide product range covers most common cut-out dimensions of traditional light sources and delivers enhanced energy savings.
PMMA light guide with PC diffusor for low glare even light distribution.
Supplied with remote non-dimmable constant current driver and 150mm cable for ease of installation.
Dimmable driver options as accessory.


Slim-Fit CS - DL150273

Colour Switchable super-slim Aluminium edge-lite low profile LED Downlights are ideal for installations in limited recess space (23mm including driver).
Wide product range covers most common cut-out dimensions of traditional light sources and delivers enhanced energy savings.
PMMA light guide with PC diffusor for low glare even light distribution.
Supplied with remote non-dimmable constant current driver and 150mm cable for ease of installation.
Dimmable driver options as accessory.


Slim-Fit CS - DR149635

The DR149635 driver is a phase cut dimmable driver. It is delivered pre-wired with350 mm of 2-conductor cable on the primary side and a 1/2 connectorized cord for connection to the luminaire.
Dimming range from 5-15 to 100% (minimum brightness may vary depending on the performance of the dimmer used).
No flicker and smooth dimming in all light conditions.
Leading and trailing edge compatible.



Slim-Fit CS - DR149642

The DR149642 driver is a phase cut dimmable driver. It is delivered pre-wired with350 mm of 2-conductor cable on the primary side and a 1/2 connectorized cord for connection to the luminaire.
Dimming range from 5-15 to 100% (minimum brightness may vary depending on the performance of the dimmer used).
No flicker and smooth dimming in all light conditions.
Leading and trailing edge compatible.



Slim-Fit CS - DR149659

The DR149659 driver is a phase cut dimmable driver. It is delivered pre-wired with350 mm of 2-conductor cable on the primary side and a 1/2 connectorized cord for connection to the luminaire.
Dimming range from 5-15 to 100% (minimum brightness may vary depending on the performance of the dimmer used).
No flicker and smooth dimming in all light conditions.
Leading and trailing edge compatible.



Slim-Fit CS - DR149666

The DR149666 driver is a phase cut dimmable driver. It is delivered pre-wired with350 mm of 2-conductor cable on the primary side and a 1/2 connectorized cord for connection to the luminaire.
Dimming range from 5-15 to 100% (minimum brightness may vary depending on the performance of the dimmer used).
No flicker and smooth dimming in all light conditions.
Leading and trailing edge compatible.



Slim-Fit CS - DR149673

Stand-alone security lighting conversion kit for SLIM-Fit CS 18 and 24W.
The kit includes a security lighting driver and its rechargeable battery.
Allows the maintenance of uniform lighting guaranteeing visibility.
Helps prevent any risk of panic.
Rated operating time: 3 hours.
Plug-and-Play installation.

This website uses cookies to ensure you get the best experience on our website