Deutsch
Français
RANGES
There are 57 products.
Active filters
LEDline - ST156213
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDline - ST156220
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDline - ST156367
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 5 metres individual lengths should be connected in parallel.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 5 metres individual lengths should be connected in parallel.
LEDline - ST156435
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDline - ST159665
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
made by concatenation
Dimmable Phase Cut ( TRIAC) Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
Loop in/out on primary side; 3 X 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
Loop in/out on primary side; 3 X 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
IP65 VersiTile LED BackLit panel with an efficiency of 120lm/W is the perfect choice for highly demanding environments such as healthcare, kitchens and commercial.
IP65 rated front- and backside as well as metal grommet and valve enable a reliable and secure installation.
PMMA lens technology with high transmission microprismatic and waterproof diffuser provides excellent glare control and high uniformity with an UGR19.
Flicker-free IP65 rated LED driver pre-wired for simplified and fast installation.
IP65 rated front- and backside as well as metal grommet and valve enable a reliable and secure installation.
PMMA lens technology with high transmission microprismatic and waterproof diffuser provides excellent glare control and high uniformity with an UGR19.
Flicker-free IP65 rated LED driver pre-wired for simplified and fast installation.
PrincetonWS - LN212001
Wattage Switchable Low Glare Surface Mount Commercial Linear as perfect energy saving solution to fluorescent fittings.
Robust quality housing with micro-prismatic optics ensures even and uniform light distribution with minimal glare UGR19.
Drop down gear tray can be locked after installation and maintenance for safer operation.
Non dimmable driver with push-fit terminal enables rapid installation.
Wattage Switchable during installation between 22W/28W/34W and 40W.
Robust quality housing with micro-prismatic optics ensures even and uniform light distribution with minimal glare UGR19.
Drop down gear tray can be locked after installation and maintenance for safer operation.
Non dimmable driver with push-fit terminal enables rapid installation.
Wattage Switchable during installation between 22W/28W/34W and 40W.
PrincetonWS - LN215001
Wattage Switchable Low Glare Surface Mount Commercial Linear as perfect energy saving solution to fluorescent fittings.
Robust quality housing with micro-prismatic optics ensures even and uniform light distribution with minimal glare UGR19.
Drop down gear tray can be locked after installation and maintenance for safer operation.
Non dimmable driver with push-fit terminal enables rapid installation.
Wattage Switchable during installation between 34W/43W/52W and 60W.
Robust quality housing with micro-prismatic optics ensures even and uniform light distribution with minimal glare UGR19.
Drop down gear tray can be locked after installation and maintenance for safer operation.
Non dimmable driver with push-fit terminal enables rapid installation.
Wattage Switchable during installation between 34W/43W/52W and 60W.
SpryteCS - DL149963
Colour Switchable compact integrated IP44 Triac dimmable Polycarbonate LED Downlights for installations in shallow ceiling voids.
Fixed and Adjustable versions offer best value for money and are ideal as GU10 replacement installations in limited recess space (56mm height).
LEDchroic lens design with 60° beam angle imitates the appearance of halogen lamps and provides controlled, uniform light distribution with minimal glare.
Class II and air leakage tested meeting latest building regulation requirements.
Pre-wired with 500mm 2 core cable allows tool free rapid installation.
Fixed and Adjustable versions offer best value for money and are ideal as GU10 replacement installations in limited recess space (56mm height).
LEDchroic lens design with 60° beam angle imitates the appearance of halogen lamps and provides controlled, uniform light distribution with minimal glare.
Class II and air leakage tested meeting latest building regulation requirements.
Pre-wired with 500mm 2 core cable allows tool free rapid installation.
SpryteCS - DL149970
Colour Switchable compact integrated IP44 Triac dimmable Polycarbonate LED Downlights for installations in shallow ceiling voids.
Fixed and Adjustable versions offer best value for money and are ideal as GU10 replacement installations in limited recess space (56mm height).
LEDchroic lens design with 60° beam angle imitates the appearance of halogen lamps and provides controlled, uniform light distribution with minimal glare.
Class II and air leakage tested meeting latest building regulation requirements.
Pre-wired with 500mm 2 core cable allows tool free rapid installation.
Fixed and Adjustable versions offer best value for money and are ideal as GU10 replacement installations in limited recess space (56mm height).
LEDchroic lens design with 60° beam angle imitates the appearance of halogen lamps and provides controlled, uniform light distribution with minimal glare.
Class II and air leakage tested meeting latest building regulation requirements.
Pre-wired with 500mm 2 core cable allows tool free rapid installation.