Deutsch
Français
RANGES
There are 54 products.
Active filters
LEDline - ST156213
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDline - ST156220
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDline - ST156367
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 5 metres individual lengths should be connected in parallel.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 5 metres individual lengths should be connected in parallel.
LEDline - ST156435
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDline - ST159665
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
made by concatenation
Dimmable Phase Cut ( TRIAC) Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
Loop in/out on primary side; 3 X 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
Loop in/out on primary side; 3 X 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
ONExLITE - DL150099
Colour & Wattage Switchable Convertible Triac dimmable LED Downlight.
Convertible IP65 Bezel design enables transformation from adjustable into fixed design for maximum versatility. Supplied with Adjustable White Polycarbonate Bezel.
Rapid tool-free installation through loop in / loop out push-fit wiring terminals with strain relief.
Compact integrated low profile design with insulation cover allow for use in shallow voids up to 50mm. Downlight and driver are insulation coverable.
Convertible IP65 Bezel design enables transformation from adjustable into fixed design for maximum versatility. Supplied with Adjustable White Polycarbonate Bezel.
Rapid tool-free installation through loop in / loop out push-fit wiring terminals with strain relief.
Compact integrated low profile design with insulation cover allow for use in shallow voids up to 50mm. Downlight and driver are insulation coverable.
ONExLITE - DL159887
Colour & Wattage Switchable Convertible Triac dimmable LED Downlight.
Convertible IP65 Bezel design enables transformation from adjustable into fixed design for maximum versatility. Supplied without Bezel.
Rapid tool-free installation through loop in / loop out push-fit wiring terminals with strain relief.
Compact integrated low profile design with insulation cover allow for use in shallow voids up to 50mm. Downlight and driver are insulation coverable.
Convertible IP65 Bezel design enables transformation from adjustable into fixed design for maximum versatility. Supplied without Bezel.
Rapid tool-free installation through loop in / loop out push-fit wiring terminals with strain relief.
Compact integrated low profile design with insulation cover allow for use in shallow voids up to 50mm. Downlight and driver are insulation coverable.
PrincetonWS - LN212001
Wattage Switchable Low Glare Surface Mount Commercial Linear as perfect energy saving solution to fluorescent fittings.
Robust quality housing with micro-prismatic optics ensures even and uniform light distribution with minimal glare UGR19.
Drop down gear tray can be locked after installation and maintenance for safer operation.
Non dimmable driver with push-fit terminal enables rapid installation.
Wattage Switchable during installation between 22W/28W/34W and 40W.
Robust quality housing with micro-prismatic optics ensures even and uniform light distribution with minimal glare UGR19.
Drop down gear tray can be locked after installation and maintenance for safer operation.
Non dimmable driver with push-fit terminal enables rapid installation.
Wattage Switchable during installation between 22W/28W/34W and 40W.
PrincetonWS - LN215001
Wattage Switchable Low Glare Surface Mount Commercial Linear as perfect energy saving solution to fluorescent fittings.
Robust quality housing with micro-prismatic optics ensures even and uniform light distribution with minimal glare UGR19.
Drop down gear tray can be locked after installation and maintenance for safer operation.
Non dimmable driver with push-fit terminal enables rapid installation.
Wattage Switchable during installation between 34W/43W/52W and 60W.
Robust quality housing with micro-prismatic optics ensures even and uniform light distribution with minimal glare UGR19.
Drop down gear tray can be locked after installation and maintenance for safer operation.
Non dimmable driver with push-fit terminal enables rapid installation.
Wattage Switchable during installation between 34W/43W/52W and 60W.
RTpro - DL150105
Colour Switchable IP65 Integrated LED Downlight with slim profile making it the perfect choice for all applications and ceilings even covered by any type of insulation.
Integrated flicker-free triac dimmable led driver enables installations in shallow ceiling voids due to its super slim profile design with a recess depth of 24mm above the celing.
Edge to edge 50° multifaceted polycarbonate lens for low glare, led efficiency and halogen like appearance.
Colour Switchable 2700K/3000K/4000K and high product efficiency with up to 120lm/W at 4000K.
Airtight for reduced energy loss. IP65 & Class 2 rated for wet environments (zone 2).
Integrated flicker-free triac dimmable led driver enables installations in shallow ceiling voids due to its super slim profile design with a recess depth of 24mm above the celing.
Edge to edge 50° multifaceted polycarbonate lens for low glare, led efficiency and halogen like appearance.
Colour Switchable 2700K/3000K/4000K and high product efficiency with up to 120lm/W at 4000K.
Airtight for reduced energy loss. IP65 & Class 2 rated for wet environments (zone 2).