Deutsch
Français
RANGES
There are 57 products.
Active filters
LEDline - ST156213
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDline - ST156220
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDline - ST156367
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 5 metres individual lengths should be connected in parallel.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 5 metres individual lengths should be connected in parallel.
LEDline - ST156435
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDline - ST159665
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
made by concatenation
Dimmable Phase Cut ( TRIAC) Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
Loop in/out on primary side; 3 X 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
Loop in/out on primary side; 3 X 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Colour Switchable Die-Cast Aluminium Decorative Wall Light suitable for both indoor and outdoor installations.
Durable IP65 rated, impact resistant and salt-spray tested housing for long service life.
Superior optical convex lens design ensures precise, direct/indirect symmetrical light distribution. Available as direct or direct/indirect version.
Integrated TRIAC dimmable LED driver with junction box for simplified installation.
Durable IP65 rated, impact resistant and salt-spray tested housing for long service life.
Superior optical convex lens design ensures precise, direct/indirect symmetrical light distribution. Available as direct or direct/indirect version.
Integrated TRIAC dimmable LED driver with junction box for simplified installation.
made by concatenation
Colour Switchable Up/Down Aluminium IP65 Wall Lights with integrated non dimmable driver.
Slim Aluminium body IK08 with clear polycarbonate diffuser.
Colour Switchable between 2700K/3300K/4000K prior to installation.
Aluminium Body with Finish in Black.
Slim Aluminium body IK08 with clear polycarbonate diffuser.
Colour Switchable between 2700K/3300K/4000K prior to installation.
Aluminium Body with Finish in Black.
SpryteCS - DL149963
Colour Switchable compact integrated IP44 Triac dimmable Polycarbonate LED Downlights for installations in shallow ceiling voids.
Fixed and Adjustable versions offer best value for money and are ideal as GU10 replacement installations in limited recess space (56mm height).
LEDchroic lens design with 60° beam angle imitates the appearance of halogen lamps and provides controlled, uniform light distribution with minimal glare.
Class II and air leakage tested meeting latest building regulation requirements.
Pre-wired with 500mm 2 core cable allows tool free rapid installation.
Fixed and Adjustable versions offer best value for money and are ideal as GU10 replacement installations in limited recess space (56mm height).
LEDchroic lens design with 60° beam angle imitates the appearance of halogen lamps and provides controlled, uniform light distribution with minimal glare.
Class II and air leakage tested meeting latest building regulation requirements.
Pre-wired with 500mm 2 core cable allows tool free rapid installation.
SpryteCS - DL149970
Colour Switchable compact integrated IP44 Triac dimmable Polycarbonate LED Downlights for installations in shallow ceiling voids.
Fixed and Adjustable versions offer best value for money and are ideal as GU10 replacement installations in limited recess space (56mm height).
LEDchroic lens design with 60° beam angle imitates the appearance of halogen lamps and provides controlled, uniform light distribution with minimal glare.
Class II and air leakage tested meeting latest building regulation requirements.
Pre-wired with 500mm 2 core cable allows tool free rapid installation.
Fixed and Adjustable versions offer best value for money and are ideal as GU10 replacement installations in limited recess space (56mm height).
LEDchroic lens design with 60° beam angle imitates the appearance of halogen lamps and provides controlled, uniform light distribution with minimal glare.
Class II and air leakage tested meeting latest building regulation requirements.
Pre-wired with 500mm 2 core cable allows tool free rapid installation.