Deutsch
Français
RANGES
There are 52 products.
LEDline - ST156213
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDline - ST156220
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDline - ST156367
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 5 metres individual lengths should be connected in parallel.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 5 metres individual lengths should be connected in parallel.
LEDline - ST156435
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDline - ST159665
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
made by concatenation
Dimmable Phase Cut ( TRIAC) Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
Loop in/out on primary side; 3 X 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
Loop in/out on primary side; 3 X 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
High-Efficiency (150 lm/W) IP69K Corrosion-Resistant Linear Batten with opal UV-resistant polycarbonate diffuser, IK10 rated for maximum impact resistance.
IP69K rated and designed for environments requiring heavy wash-down cleaning.
Supplied with 316 stainless steel end-caps and mounting brackets for simplified surface installation.
Integrated flicker-free, non-dimmable driver with IP69K cable glands on both ends and 3pol push terminals for safe, rapid through-wiring.
UV resistant and suitable for installations in unprotected outdoor areas with ambient temperatures from –20 °C to +45 °C.
IP69K rated and designed for environments requiring heavy wash-down cleaning.
Supplied with 316 stainless steel end-caps and mounting brackets for simplified surface installation.
Integrated flicker-free, non-dimmable driver with IP69K cable glands on both ends and 3pol push terminals for safe, rapid through-wiring.
UV resistant and suitable for installations in unprotected outdoor areas with ambient temperatures from –20 °C to +45 °C.
made by concatenation
High-Efficiency (150 lm/W) IP69K Corrosion-Resistant Linear Batten with opal UV-resistant polycarbonate diffuser, IK10 rated for maximum impact resistance.
IP69K rated and designed for environments requiring heavy wash-down cleaning.
Supplied with 316 stainless steel end-caps and mounting brackets for simplified surface installation.
Integrated flicker-free, non-dimmable driver with IP69K cable glands on both ends and 3pol push terminals for safe, rapid through-wiring.
UV resistant and suitable for installations in unprotected outdoor areas with ambient temperatures from –20 °C to +45 °C.
IP69K rated and designed for environments requiring heavy wash-down cleaning.
Supplied with 316 stainless steel end-caps and mounting brackets for simplified surface installation.
Integrated flicker-free, non-dimmable driver with IP69K cable glands on both ends and 3pol push terminals for safe, rapid through-wiring.
UV resistant and suitable for installations in unprotected outdoor areas with ambient temperatures from –20 °C to +45 °C.
MarinaKIT - DL150136
Bathroom Downlight Kit including IP65 Aluminium Recessed Bezel in White, 12V SELV electronic transformer, lamp socket pre-wired with 1 metre cable and GU5.3 5W LED lamp.
5W 3000K MR16 LED Lamp with 38° beam angle included in Kit.
Class III non-dimmable 12V electronic transformer.
GU5.3 socket pre-wired with 1 metre cable.
Luminaire locking by snap-in mechanism.
5W 3000K MR16 LED Lamp with 38° beam angle included in Kit.
Class III non-dimmable 12V electronic transformer.
GU5.3 socket pre-wired with 1 metre cable.
Luminaire locking by snap-in mechanism.