Deutsch
Français
RANGES
There are 54 products.
Active filters
LEDline - ST156213
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDline - ST156220
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDline - ST156367
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 5 metres individual lengths should be connected in parallel.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 5 metres individual lengths should be connected in parallel.
LEDline - ST156435
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDline - ST159665
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
made by concatenation
Dimmable Phase Cut ( TRIAC) Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
Loop in/out on primary side; 3 X 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
Loop in/out on primary side; 3 X 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
ONExPRO - DL150174
Colour & Wattage Switchable Convertible Triac dimmable LED Fire Rated LED Downlight.
Convertible IP65 Bezel design enables transformation from adjustable into fixed design for maximum versatility. Supplied with Adjustable White Aluminium Bezel.
Rapid tool-free installation through loop in / loop out push-fit wiring terminals with strain relief.
Compact integrated low profile design with insulation cover allow for use in shallow voids up to 50mm. Downlight and driver are insulation coverable.
Tested in 30 and 60 minutes fire-rated ceilings according to EN1365-2.
Convertible IP65 Bezel design enables transformation from adjustable into fixed design for maximum versatility. Supplied with Adjustable White Aluminium Bezel.
Rapid tool-free installation through loop in / loop out push-fit wiring terminals with strain relief.
Compact integrated low profile design with insulation cover allow for use in shallow voids up to 50mm. Downlight and driver are insulation coverable.
Tested in 30 and 60 minutes fire-rated ceilings according to EN1365-2.
ONExPRO - DL159894
Colour & Wattage Switchable Convertible Triac dimmable LED Fire Rated LED Downlight.
Convertible IP65 Bezel design enables transformation from adjustable into fixed design for maximum versatility. Supplied without Bezel.
Rapid tool-free installation through loop in / loop out push-fit wiring terminals with strain relief.
Compact integrated low profile design with insulation cover allow for use in shallow voids up to 50mm. Downlight and driver are insulation coverable.
Tested in 30 and 60 minutes fire-rated ceilings according to EN1365-2.
Convertible IP65 Bezel design enables transformation from adjustable into fixed design for maximum versatility. Supplied without Bezel.
Rapid tool-free installation through loop in / loop out push-fit wiring terminals with strain relief.
Compact integrated low profile design with insulation cover allow for use in shallow voids up to 50mm. Downlight and driver are insulation coverable.
Tested in 30 and 60 minutes fire-rated ceilings according to EN1365-2.
PavoCWS PRO - DL151966
Colour & Wattage Switchable Aluminium LED Downlight for surface or recessed installations with adjustable cut-out.
3 Wattage and 3 Colour Selections available for ultimate flexibility in every application and perfect retrofit solution for renovations.
One size fit all bracket for adjustable cut-out between 65-205mm enables flexible recessed or surface mount installation.
Integrated non dimmable led driver for very low profile installation height of only 16mm.
Supplied with 300mm pre-wired cable for quick installation.
3 Wattage and 3 Colour Selections available for ultimate flexibility in every application and perfect retrofit solution for renovations.
One size fit all bracket for adjustable cut-out between 65-205mm enables flexible recessed or surface mount installation.
Integrated non dimmable led driver for very low profile installation height of only 16mm.
Supplied with 300mm pre-wired cable for quick installation.