Deutsch
Français
RANGES
There are 61 products.
Active filters
LEDline - ST156213
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDline - ST156220
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDline - ST156367
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 5 metres individual lengths should be connected in parallel.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 5 metres individual lengths should be connected in parallel.
LEDline - ST156435
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDline - ST159665
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
made by concatenation
The DR159511 driver is a dimmable 1-10V driver with adjustable constant current. It is supplied complete with an IP65 cable for connection to the luminaire.
Dimming range from 5 to 100%.
No flicker and smooth dimming in all light conditions.
Output current adjustment ( 10 levels ) by means of micro-switches.
Support CBS , central emergency application.
Independent cable clamps ( inlet / outlet ).
Dimming range from 5 to 100%.
No flicker and smooth dimming in all light conditions.
Output current adjustment ( 10 levels ) by means of micro-switches.
Support CBS , central emergency application.
Independent cable clamps ( inlet / outlet ).
made by concatenation
The DR159443 driver is a dimmable DALI-2 and PushDIM driver with adjustable constant current. It is supplied complete with a IP65 cable for connection to the luminaire.
Dimming range from 1 to 100%.
No flicker and smooth dimming in all light conditions.
Output current adjustment ( 10 levels ) by means of micro-switches.
Support CBS , central emergency application.
Independent cable clamps ( inlet / outlet ).
Dimming range from 1 to 100%.
No flicker and smooth dimming in all light conditions.
Output current adjustment ( 10 levels ) by means of micro-switches.
Support CBS , central emergency application.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Dimmable Phase Cut ( TRIAC) Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
Loop in/out on primary side; 3 X 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
Loop in/out on primary side; 3 X 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Colour Switchable Adjustable Rectangular recessed Aluminium LED wallwasher designed to highlight displays and wall features in both indoor and outdoor applications. Perfect for applications that require high quality light output and superior colour rendering.
Adjustable rectangular tilt rotation of 70° to adapt to changing point of sale environments. Producing up to 4300 lumens from 42W LED, it is the perfect replacement for metal halide.
Colour Switchable between 3000K/3500K/4000K.
Non-dimmable flicker-free driver pre-wired for ease of installation.
Adjustable rectangular tilt rotation of 70° to adapt to changing point of sale environments. Producing up to 4300 lumens from 42W LED, it is the perfect replacement for metal halide.
Colour Switchable between 3000K/3500K/4000K.
Non-dimmable flicker-free driver pre-wired for ease of installation.
made by concatenation
IP54 Edge-lit LED Panel design with optical pattern PMMA light guide engineered for even and uniform light distribution.
Microprismatic diffuser provides excellent glare control with UGR <19.
Low profile product height of only 10mm enables installations in 15 and 24mm t-bar ceilings as well as ceiling suspension, surface mount or recess mount in plasterboard.
Flicker-free non-dimmable LED driver pre-wired for simplified and fast through-wiring installation. Safety cable according to EN60598 included.
Edge-lit design and optical pattern light guide engineered for even light distribution.
Microprismatic diffuser provides excellent glare control with UGR <19.
Low profile product height of only 10mm enables installations in 15 and 24mm t-bar ceilings as well as ceiling suspension, surface mount or recess mount in plasterboard.
Flicker-free non-dimmable LED driver pre-wired for simplified and fast through-wiring installation. Safety cable according to EN60598 included.
Edge-lit design and optical pattern light guide engineered for even light distribution.
made by concatenation
IP54 Edge-lit LED Panel design with optical pattern PMMA light guide engineered for even and uniform light distribution.
Microprismatic diffuser provides excellent glare control with UGR <19.
Low profile product height of only 10mm enables installations in 15 and 24mm t-bar ceilings as well as ceiling suspension, surface mount or recess mount in plasterboard.
Flicker-free non-dimmable LED driver pre-wired for simplified and fast through-wiring installation. Safety cable according to EN60598 included.
Edge-lit design and optical pattern light guide engineered for even light distribution.
Microprismatic diffuser provides excellent glare control with UGR <19.
Low profile product height of only 10mm enables installations in 15 and 24mm t-bar ceilings as well as ceiling suspension, surface mount or recess mount in plasterboard.
Flicker-free non-dimmable LED driver pre-wired for simplified and fast through-wiring installation. Safety cable according to EN60598 included.
Edge-lit design and optical pattern light guide engineered for even light distribution.