Deutsch
Français
RANGES
There are 55 products.
Active filters
LEDline - ST156213
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDline - ST156220
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDline - ST156367
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 5 metres individual lengths should be connected in parallel.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 5 metres individual lengths should be connected in parallel.
LEDline - ST156435
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 100mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
LEDline - ST159665
High intensity SMD LED Strip with 3m self adhesive tape.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
Cut points every 50mm for maximum flexibility.
Beam angle of 120° and 120 LEDs per metre.
For runs over 10 metres individual lengths should be connected in parallel.
made by concatenation
Dimmable Phase Cut ( TRIAC) Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
2 x 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
Non-dimmable Constant Voltage (CV) LED driver.
SELV type with Short circuit; Overload and Over voltage protection.
Loop in/out on primary side; 3 X 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
SELV type with Short circuit; Overload and Over voltage protection.
Loop in/out on primary side; 3 X 24 VDC outputs on screw terminal block.
IP20 for indoor use.
Independent cable clamps ( inlet / outlet ).
made by concatenation
IP67 GU10 Recessed Ground Light as the perfect choice for residential outdoor environments.
Corrosion-resistant body with 304 stainless steel bezel, A4 stainless steel screws and clear tempered glass diffuser (2.500kg load) with salt-spray protection.
Supplied with integrated GU10 socket, waterproof junction box for simplified and reliable installation and 1 m rubber cable.
Designed for ambient temperatures from –30 °C to +45 °C.
Corrosion-resistant body with 304 stainless steel bezel, A4 stainless steel screws and clear tempered glass diffuser (2.500kg load) with salt-spray protection.
Supplied with integrated GU10 socket, waterproof junction box for simplified and reliable installation and 1 m rubber cable.
Designed for ambient temperatures from –30 °C to +45 °C.
made by concatenation
IP67 GU10 Recessed Ground Light as the perfect choice for residential outdoor environments.
Corrosion-resistant body with 304 stainless steel bezel, A4 stainless steel screws and clear tempered glass diffuser (2.500kg load) with salt-spray protection.
Supplied with integrated GU10 socket, waterproof junction box for simplified and reliable installation and 1 m rubber cable.
Designed for ambient temperatures from –30 °C to +45 °C.
Corrosion-resistant body with 304 stainless steel bezel, A4 stainless steel screws and clear tempered glass diffuser (2.500kg load) with salt-spray protection.
Supplied with integrated GU10 socket, waterproof junction box for simplified and reliable installation and 1 m rubber cable.
Designed for ambient temperatures from –30 °C to +45 °C.
PavoCWS PRO - DL151966
Colour & Wattage Switchable Aluminium LED Downlight for surface or recessed installations with adjustable cut-out.
3 Wattage and 3 Colour Selections available for ultimate flexibility in every application and perfect retrofit solution for renovations.
One size fit all bracket for adjustable cut-out between 65-205mm enables flexible recessed or surface mount installation.
Integrated non dimmable led driver for very low profile installation height of only 16mm.
Supplied with 300mm pre-wired cable for quick installation.
3 Wattage and 3 Colour Selections available for ultimate flexibility in every application and perfect retrofit solution for renovations.
One size fit all bracket for adjustable cut-out between 65-205mm enables flexible recessed or surface mount installation.
Integrated non dimmable led driver for very low profile installation height of only 16mm.
Supplied with 300mm pre-wired cable for quick installation.
Retro GLS - LA151713
Cost effective 290° Retrofit E27 GLS lamp.
Non dimmable.
Ideal replacement for traditional incandescent lamps.
Non dimmable.
Ideal replacement for traditional incandescent lamps.